Call: (877) 660-0974 | (804) 550-7202

ROHN 25G Towers ROHN 45G Towers ROHN 55G Towers ROHN 65G Towers ROHN H Series Telescopic Masts

Customer Service

48 Inch Eave Mount Antenna Mast Bracket

Description

TnB EM-48 Galvanized Eave Mount Antenna Mast Bracket
Used for easy mounting on the eave of a house. Lower Bracket of 16 gauge Hot Dip Galvanized steel, non-adjustable 48 inches. Both the upper and lower brackets are for masts up to 2.25 inches in diameter with clamps, bolts and 2.5 inch lag screws. Mast can pass by lower Bracket for Ground mount installations (Mast Not Included). Will stand-off mast 2.25 inches from surface.

Typical rafter spacings are 16 inches center to center and pre-built trusses are 24 inches center to center.

Availability: Call to Order
Shipping: Can ship anywhere

Accessories

Bulk Lot of 3' HDMI Cable - $3.95

SCP 944-3 3 Foot Self Contained and Connectorized In-Wall Rated HDMI™ Cable
3 Foot HDMI Cable that connects HDTV's, Digital Flat Panel Displays, PS3's, Game Consoles and other Components with HDMI™ connections to Digital DVD players, Digital A/V Receivers and other Equipment with HDMI™ connections...
Shipping/ More Info Here

RG6 Coaxial Cable 60% Copper Clad 3 GHz Black 1000 Feet Pro Gear - $58.95

Pro Gear 1000BX-RB-1000 1000' BOX RG-6 Coaxial Cable

DISH Network Approved!
Pro Gear Manufacturer # 1000BX-RB-1000. CCS RG-6 single coax, black, 1000ft reel-in-box. This RG-6 coaxial cable is dish approved and swept to 3.0 GHz. It has 60% aluminum braid and 100% aluminum foil. The center conductor is 18awg copper clad steel. UV inhibitor jacket. UL and CL2 approved.
Shipping/ More Info Here

Antenna Wall Mounts

It is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.

Your Cart



Your shopping cart is empty!

We Ship Fast!

APO FPO Shipping Policy

Click here for BBB Business Review

This Site is Operated and Maintained By 3 Star Incorporated
© 2008-2011 3starinc.com All Rights are Reserved and Enforced
3 Star Inc. 9487 King Air Court Ashland, VA 23005 USA
* 877-660-0974 (804) 550-7202 FAX (804) 550-7204 *
E-mail Webmaster Via the "Contact Us" Page please
All Site Hosting Services Provided by Intelli-Net

U.S. Military Welcome!

RSS

48 Inch Eave Mount Antenna Mast Bracket