Call: (877) 660-0974 | (804) 550-7202

ROHN 25G Towers ROHN 45G Towers ROHN 55G Towers ROHN 65G Towers ROHN H Series Telescopic Masts

Customer Service

BR-4XD Deluxe TV Antenna Mast Wall Mount W Bracket with 4" Standoff

Description

DCP BR-4XD 4" Stand-off "W" Galvanized Steel Wall Mount
Made of Galvanized Steel for TV Antenna Mast Mounting on Wall Surface. 2 inch Hardware included. For Mounting Mast from 1 to 2.25 Inches in Diameter and up to 10 Feet in Height (Depending on Antenna Size). Professional Grade, Sturdy.(Mast not Included)

This Wall Mount Bracket for Antenna Masts is made of Sturdy Pre-Galvanized Steel with over 2 and 1/4 inches between the Clamp Bolts; applicable to 2 inch diameter Antenna Masts, as well as the ROHN H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescoping Masts with a healthy 4 inches of clearance that most "W" brackets afford. If You need to Install a Smaller TV Antenna Mast, it can accomodate from 1.25 inch diameter Masting for antennas (which is normal) safely with the Hardware that is supplied. If you are Installing 2 inch diameter masts, use shorter "W" Brackets instead and run the Mast length all the way to the Ground, resting the weight on a Mast Ground Plate and affix an Earth Ground there with a 5/8 inch diameter, 8 foot long Ground Rod as a minimum.

This Bracket is no longer Manufactured as Thomas and Betts has purchased Diamond Communications Products and discontinued carriage in their Product Line. We have replaced this Product with a Hardier, more Robust, Heavier Gauge, Heavy Duty, Hot Dip Galvanized ROHN WM4 Bracket below...

Availability: Call to Order
Shipping: Can ship anywhere

Accessories

EZ46-3PO Pitch Pad Moisture Barrier Kit - $1.95

EZ 46-3PO Pitch Pad Only Kit
Comes with (3) Pitch Pads (only) for Weather-Proofing Bracket Mounting Installations on Exterior Surfaces...
Shipping/ More Info Here

Antenna Wall Mounts

It is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.

Your Cart



Your shopping cart is empty!

We Ship Fast!

APO FPO Shipping Policy

Click here for BBB Business Review

This Site is Operated and Maintained By 3 Star Incorporated
© 2008-2011 3starinc.com All Rights are Reserved and Enforced
3 Star Inc. 9487 King Air Court Ashland, VA 23005 USA
* 877-660-0974 (804) 550-7202 FAX (804) 550-7204 *
E-mail Webmaster Via the "Contact Us" Page please
All Site Hosting Services Provided by Intelli-Net

U.S. Military Welcome!

RSS

BR-4XD Deluxe TV Antenna Mast Wall Mount W Bracket with 4" Standoff