3 Star Inc EZ 43-A 3-Way Down Guy Ring with Adjustable Collar for 1.25 inch Antenna Mast Pole
Made in the USA!
The EZ 43-A is an Adjustable Level Down Guy Ring for 3-Way guying of Antenna masts at any height along the 1-1/4" OD mast pole with Screw Eye Bolts to affix 620 guy wire. It can be used for supplementing or repairing existing installations or when configuring your own New Installation or Antenna Mast Extension.
(Mast and Guy Wire Not Included).

EZ 47-S1 Hex Head with Integral Washer Lag Screws
(4 count each Order)...

When applied under tension, COLD SHRINK TAPE provides a neat, void free, continuous wrapping, Applies by hand, it contours closely to itself and irregular shapes or bends, forming a permanent insulating layer or waterproofing barrier...

EZ 47-S8 Hex Head with Integral Washer Lag Screws
(4 count each Order)...

EZ 47-S3 Hex Head with Integral Washer Lag Screws
(6 count each Order)...

3 Star Inc EZ 62A 1" Slit Corrugated Loom Tubing Cable and Down Guy Wire Cover
Made in the USA!
This is Corrugated Loom Tubing Slit, 1" (25.4mm) x 7 feet, Yellow UV resistant for applications where Spiral Wrap or Braided Expandable Sleeving may be difficult to install over the guy wire as a guard or they do not offer the amount of protection required. This can also be used in conduit applications to protect individual or grouped wires and cables when routed to their destination connection.

PLP 115-Guy Guard Round Yellow Plastic Polypropylene Guy Marker
The PLP 115 Down Guy Wire Marker Guards are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed Utility Pole and Tower down guy wires. Measures 1-1/2" X 8' with Stainless Steel Clamp that secures onto Strand at Top end.

Synthetic Rubber Mastic Tape Rubber Mastic tape for those critical needs. self-fusing rubber-based compound bonded to a moisture sealing mastic. Insulate, pad and seal splices and Coaxial Cable Connections...

Weather proofing Rubber Tape for those critical needs. self-fusing rubber-based compound bonded to a moisture sealing mastic. Insulate, pad and seal splices and Coaxial Cable Connections...

Synthetic Rubber Mastic Tape Rubber Mastic tape for those critical needs. self-fusing rubber-based compound bonded to a moisture sealing mastic. Insulate, pad and seal splices and Coaxial Cable Connections...

3 Star Inc 70-7YTIE Round Yellow Plastic Polypropylene Down Guy Wire Guard Marker
The 3 Star 70-7YTIE Guy Marker Guards are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed Utility Pole and Tower down guy wires. Measures 1-1/4" X 8' with Plastic Tie that loops through Preform Dead-end at Anchor Termination.

3 Star Inc GR-2 4-Way Brace Ring Collar for Non-Penetrating Roof Mount Antenna Mast
Made in the USA!
For Non-Penetrating Flat Roof Mount Assemblies with Adjustable mount, 4-way Leg attachment and Set Screws for supporting Antenna Masts from 1-1/4 up to 2-3/8" in Diameter. Can Be used for Repair, Replacement or in New Build Kits

3 Star Inc GR-2-A Adjustable 4-Way Down Guy Ring for 1-1/4" to 2-1/4" OD Antenna Mast
Made in the USA!
Adjustable Height and Diameter Antenna Mast Down Guy Ring used in 4-Way guying of Antenna Masts with Forged Eye Bolts to affix 618/620 guy wire, Fits Masts from 1-1/4 up to 2 1/4" for Ground Base or FRM Frame Mount Guying (Mast, Wire, Anchors, Base Not Included). Galvanized for Corrosion protection.

EZ 46-3 Pitch Pad Kit with Screws
Made in the USA!
Complete with (3) 3 x 1.5" Moisture Barrier Pitch Pads and (6) 2 x 1/4" Hex Head Integral Washer Lag Screws for Weather-Proof Bracket Mounting to Exterior Surfaces. Most popular screw size for the majority of Antenna Mast Bracket Installations..

EZ 46-3PO Pitch Pad Only Kit
Made in the USA!
Comes with ( 3 Pitch Pads 3" x 1.5" only) for Weather-Proofing Bracket Mounting Installations on Exterior Surfaces...

EZ 46-3 Pitch Pad Kit with Screws
Made in the USA!
Complete with (3) 3 x 1.5" Moisture Barrier Pitch Pads and (6) 5/16 x 2 1/2" Hex Head Integral Washer Lag Screws for Weather-Proof Bracket Mounting to Exterior Surfaces. Most popular screw size for the majority of Antenna Mast Bracket Installations..

EZ 46-3PO Pitch Pad Only Kit
Made in the USA!
Comes with ( 3 Pitch Pads 5" x 1.5" only) for Weather-Proofing Bracket Mounting Installations on Exterior Surfaces...

3 Star Inc GC-2 Bronze Grounding Clamp for Tower Antenna Mast Pole Pipe Section 1.25" to 2 inch OD
The GC-2 is a Cast Bronze Pipe Clamp that affixes to 1.25" to 2.00 inch OD Tower Section Rails, Base and Antenna Mast, Telescopic Mast Pole, and Pipe, used for Grounding Connections to Ground Rods accommodating Wire from #4 stranded to #10 SOL AWG.
The mirror Back half section is reversible and can be used on ROHN 25G, 45G, 55G and 65G Tower Sections and Bases as well as Universal Towers. Accommodating the most common Antenna Mast, Telescopic Mast Poles and Tower Section Rail sizes from 1.25" to 2 inch OD, remember that the Lowermost section for TM-50 and H-50 Telescopic Masts are 2.25 inches in OD and will not fit.

3 Star Inc CW4S-10 #4 Solid Bare Copper Wire Available in Contiguous 10 Foot Coils
The CW4S-10 Part number is for Ordering 10 feet of #4 Solid Bare Copper Wire used in REV. F Grounding Kits and Arrays of ROHN and Universal Towers in addition to Anchors when Guyed. REV. F Copper Ground Wire Grounding is Installed with Clamps to secure a connection to the Tower Base or Main Section Rail and then run a short distance in attachment to Copper-clad Ground Rods. Satisfactory Grounding is typically achieved through use of separate runs from (2) or more Tower Base Rails, to (1) or more Ground Rods. Priced and Sold in 10' Foot increments for Contiguous Hank Segments for total roll QTY up to 50 Feet, comprising of 10 ft. per unit ordered.

3 Star CW10S #10 Solid Copper Ground Wire
25 feet of #10 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by the foot in continuous roll (25 ft. per unit ordered)...

3 Star CW12S #12 Solid Copper Ground Wire
25 feet of #12 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by the foot in continuous roll (25 ft. per unit ordered)...

Holland Electronics GRB-2DHR Grounding Block for Dual RG Coaxial Cable TV Satellite Antenna
Appears on the DISH Network Approved List!
The GRB-2DHR is a 3 GHz passband high performance ground block featuring a zinc body with machined threads and multiple ground screw configurations that accommodates a 12 AWG Ground Wire with ease. These grounding blocks are nickel plated and utilize stainless steel ground screws for maximum indoor/outdoor survivability.

ASKA GB-5UL Grounding Block with Quad F-81 3GHz Barrel Ports for RG Coaxial Cable TV Satellite
Appears on the DISH Network Approved List!
The GB-5UL is a High Performance 3 GHz Satellite Grade Ground Block featuring a zinc body with machined threads, multiple ground screw configurations and (4) F-81 Barrel Connectors. These grounding blocks are nickel plated and utilize stainless steel ground screws for maximum indoor/outdoor survivability. Ground block accommodates a 12 AWG Ground Wire with ease.

TnB TNB4004 I-Beam Ground Clamp
Appears on the DISH Network Approved List!
This clamp is used to bond a solid or stranded copper wire to a steel structure. It is mechanically galvanized ASTM B695...

TnB TNB4009 9 inch Copper Ground Strap
Appears on the DISH Network Approved List!
This 9 inch copper strap is used for a 1/2 to 2-1/4 inch diameter pipe connection to a #10/12/14 AWG copper ground wire...

Blackburn ADR25 Aluminum Mechanical Connector 6 AWG–250 kcmil Single Termination
The ADR25 is a Tin-plated Aluminum Block Lug, Non-Insulated Mechanical Connector measuring 2"L x 1"W x 1.125"H. The Barrel Opening is 5/8" ID, entry from Front and Back with a Hex Set Screw that accommodates from 6 AWG up to 250 kcmil of both Aluminum and Copper Conductors for mounting upon a single post 5/16" stud.
On Tower Installations, this lug is usually mounted using the section joint bolt, replaced with one 1/4" longer in length to account for the 1/4" Tab thickness of the lug, then connecting the Ground Wire conductor from the Tower base to the Ground Rod or Array.

ROHN R-340020 5/8" x 8' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

3 Star 4GR 3/8" x 45" Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, 3/8" ground rod for use when grounding off-air antennas and satellite dishes. Includes preinstalled ground clamp...

TnB TNB4014 G5 5/8 inch Bronzed Ground Rod Clamp
Appears on the DISH Network Approved List!
Cast of high-strength corrosion-resistant Bronze. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection...

ASKA SB-4UL Split Bolt Connector for #4 #6 #8 Solid Core Copper Wire
Appears on the DISH Network Approved List!
This SB-4UL is a High Strength Split Bolt Connector, Equal Main and Tap Range from #4 Solid #6 Solid and #8 Solid, Conductor Range 14 Solid, Pressure Bar Material Copper.

ASKA SB-8UL Split Bolt Connector for #8 #10 Solid Core Copper Wire
Appears on the DISH Network Approved List!
This SB-8UL is a High Strength Split Bolt Connector, Equal Main and Tap Range 8 Solid to 10 Solid, Conductor Range 14 Solid, Pressure Bar Material Copper.

3 Star Inc GRKIT-MAST Ground Rod, Clamp and Wire Kit for Telescopic and Antenna Mast Poles
The GRKIT-MAST Universal Grounding Kit is for most Telescopic, Antenna Mast and Pole Mounts of 2" OD or less that includes a Ground Rod, Ground Wire and 2" OD Heavy Duty Copper Pipe Clamp.

3 Star Inc GRKIT-ANT Ground Rod, Clamp and Wire Kit for Satellite Cable TV and Antennas
The GRKIT-ANT Universal Grounding Kit is for most Satellite Dish, Off-Air Antenna TV and Digital Antennas that includes a Ground Rod, Ground Wire and Single F Port Coaxial Ground Block.

GR-4 -  5/8" x 4' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

SI2174  KUL Bonding Clamp D Lashing Clamp is used to bond #6 copper wire to 1/4"or 5/16" strand ......

Senior Industries SI-GB-50L Single Port Coaxial Cable TV Antenna Grounding Block
The SI-GB-50L 2.2 GHz passband Single Port Coaxial Cable Ground Block that features a Single, 1 Sealed Gasket Long F Connector Barrel Port in a Stainless Steel Ground Block that accommodates up to a #10 AWG Ground Wire (Available Separately) with ease primarily for Outdoor use, but can be used in Crawlspaces or at Roof level where necessary as long as the Ground wire is as short as possible to the Ground connection of either the Electrical Power Ground Rod, Electrical Meter Base Box, Common Communications Bonding location or your own Ground Rod. (Available Separately)