ROHN 45G 10' foot Standard Main Tower Section for 45G Tower
Made in the USA!
This ROHN 45G 10' foot Tower Section is the main component of every 45G Series Guyed, Self-Supporting and Bracketed Tower Kit configuration. This section based on a 16-3/4" inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 14 gauge wall side rails with seven bays of continuous solid steel rod bracing and swaged, double-bolted connection joints which are proven to be the best method of joining tower sections for sturdiness and dependability.
Each 10 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 80 lbs. The 45G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item Ships LTL Freight ONLY!

ROHN 45TGIA 10' foot Tapered Section for A-4197-L Base Insulator Mount of 45G Guyed Tower
Made in the USA!
The ROHN 45TGIA is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for A-4197-L Base Insulator Mount in Broadcast Radio Applications of the ROHN 45G Guyed Tower Series and is Designed to base onto the Austin Base Insulators/Lightning Arrestors for Guyed Radio Towers TYPE A-4197-L (not included) or 3/4X12PP (Pier Pin, sold separately).
This Item Ships LTL Freight ONLY!

ROHN 45TG 10' foot Tapered Section for Pier Pin Base Mount of 45G Guyed Tower
Made in the USA!
The ROHN 45TG is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for the 3/4X12PP (Pier Pin, sold separately) Base Mounting of the ROHN 45G Guyed Tower Series atop the appropriate concrete Pad. See the ROHN 45G Guyed Tower Catalog for Poured Concrete Pad Specifications.
This Item Ships LTL Freight ONLY!

ROHN 5545G 20' foot 55G to 45G Transition Joining Adapter Tower Section
The ROHN 5545G 20' foot 55G to 45G Transition Adapter Tower Section provides a means to join the 45G 16-3/4" Equilateral Face, 14 Gauge, 1-1/4" inch Rail Main Tower Section onto and on top of a 55G 17" Equilateral Face, 11 Gauge, 1-1/2" inch Rail Main Tower Section. This would be used in cases of Custom Engineering in increasing the Load Capacity of a 45G using a 55G Base in Self-Supporting and Guyed Installations
This Item is OVERSIZED and Ships Dedicated Freight ONLY!

ROHN 45TGIA47 10' foot Tapered Section for A-4722-B Base Insulator Mount of 45G Guyed Tower
Made in the USA!
The ROHN 45TGIA47 is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for A-4722-B Base Insulator Mount in Broadcast Radio Applications of the ROHN 45G Guyed Tower Series and is Designed to base onto the Austin Base Insulators/Lightning Arrestors for Guyed Radio Towers TYPE A-4722-B (not included) or 3/4X12PP (Pier Pin, sold separately).
This Item Ships LTL Freight ONLY!

ROHN 45RG 10' foot Tapered Base #10470 Post Insulated Section for 45G Guyed Tower
Made in the USA!
The ROHN 45RG is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version features 14 gauge walls with seven bays of bracing and swaged, double-bolted connections in a 10' Foot Tapered Section that includes (3) #10470 post insulators built into the rails of this section for use as a Base Mount of the ROHN 45G Guyed Tower Series in Radio Applications.
This Item Ships LTL Freight ONLY!

ROHN 4505G 5' foot Short Main 45G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 4505G is a 5 foot 45G Short Main Tower Section that can be used in ALL 45G Tower Series configurations. It is based upon the same 16-3/4" inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 14 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 45G 10' foot Main Tower Section but comes in at less than 96 inches in length.
Each 5 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 28 lbs. The 45G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 45AG Top Cap Section with 2.00" OD Mast Tube for 45G Tower
Made in the USA!
The ROHN 45AG Top Cap Pinnacle Section is 9'-0" in height, consists of 14 gauge walls with 4 bays of bracing, swaged double-bolted connections and a 2.00" OD Mast Tube protruding 12.00 inches above apex of side rails at the Pinnacle of this Section. A 2.00 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 1-13/16 inch Inside Diameter(2.00" OD/1.87" ID). Each 45G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 45AG3 Top Cap Section with 2.25" OD Mast Tube for 45G Tower
Made in the USA!
The ROHN 45AG3 Top Cap Pinnacle Section consists of 14 gauge walls with 4 bays of bracing and insert, double-bolted connections. The Pinnacle of this Section is Capped with a 14 AWG wall Tube (2.25" O.D./2.084" I.D.), rising 12 inches above the apex of the side rails. This ROHN section is one of several used to top off the 45G tower. The 45AG3 is available in a 9 Foot 0 inch section length. This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. Featuring a 16 3/4 inch equilateral triangular design, the 45AG3 is constructed of extra heavy duty 1-1/4" steel tubing side rails with continuous solid steel rod bracing. Each 9'-0" section is shipped containing all required nuts and bolts attached to one leg.
This Item Ships LTL Freight ONLY!

ROHN 45AG4 Top Cap Section with Thrust Bearing Plate for 45G Tower
Made in the USA!
The ROHN 45AG4 Flat Top Cap Section consists of 14 gauge walls with 3 bays of bracing and insert, double-bolted connections. The Top of this Section is Flat for use with a TB3 or TB4 Thrust Bearing (Available Separately). This ROHN section is one of several used to top off the 45G tower. The 45AG4 is available in a 7 Foot 8 inch section length. This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. Featuring a 16 3/4 inch equilateral triangular design, the 45AG4 is constructed of extra heavy duty 1-1/4" steel tubing side rails with continuous solid steel rod bracing. Each 7'-8" section is shipped containing all required nuts and bolts attached to one leg.
This Item Ships LTL Freight ONLY!

ROHN SB45G 5' foot Short Base Section for 45G Self-Supporting or Bracketed Tower
Made in the USA!
The ROHN SB45G is a 5 foot Short Base Section for Embedment in a poured Concrete Pad prior to erection of a 45G Bracketed or Self-Supporting Tower. This Short Base Section is set into a hole, with concrete poured around it and resting on top of gravel layer underneath to provide a Drained, Bolted and Fixed Connection to a 45G Main Tower or Top Cap Section which provide addition twist control.
This Item can Ship UPS Package!

ROHN 45AG1 Top Cap Section with 1.25" NPT Mast Tube for 25G Tower
Made in the USA!
The ROHN 45AG1 Top Cap Pinnacle Section consists of 14 gauge walls with 4 bays of bracing and insert, double-bolted connections. The Pinnacle of this Section is Capped with a 1-1/4 inch STD Pipe (1.66 inches O.D.) threaded as 1-1/4 inch NPT, protruding 12.00 inches above apex of side rails. This ROHN section is one of several Sections that can be used to top off the 45G tower. The 45AG1 is available in the standard 9 foot 0 inch section length. This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. Featuring a 16-3/4" equilateral triangular design, the 45AG is constructed of extra heavy duty 1-1/4" steel tubing side rails with continuous solid steel rod bracing. Each 9' section is shipped containing all required nuts and bolts attached to one leg.
This Item Ships LTL Freight ONLY!

ROHN 45AG2 Top Cap Section with 2.25" OD Mast Tube for 45G Tower
Made in the USA!
The ROHN 45AG2 Top Cap Pinnacle Section consists of 14 gauge walls with 5 bays of bracing and insert, double-bolted connections. The Pinnacle of this Section is Capped with a 14 AWG (2.38inches O.D.) Tube, protruding 18.00 inches above apex of side rails, and 36 inches in Total Length. This ROHN section is one of several used to top off the 45G tower. The 45AG2 is available in the standard 9 foot 0 inch section length. This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. Featuring a 16 3/4 inch equilateral triangular design, the 45AG is constructed of extra heavy duty 1-1/4" steel tubing side rails with continuous solid steel rod bracing. Each 9' section is shipped containing all required nuts and bolts attached to one leg.
This Item Ships LTL Freight ONLY!