RGKG RSL Grounding Kit - 3 Legs
Rohn RSL Tower Grounding kit, per Rev. G, (3) 5/8” x 10’ ground rods, 7/16” IWRC stranded galvanized ground leads and clamps.

RGKG-1 RSL Grounding Kit - 1 Leg
Rohn RSL Tower Grounding kit, per Rev. G, (2) 5/8” x 8’ ground rod, 7/16” IWRC stranded galvanized ground lead and clamps for one tower leg.

HARGER CUBU58I 5/8' Lightning Rod Air Terminal Base Bronze Universal Mount
The HARGER CUBU58I 5/8' Lightning Rod Base Air Terminal is for mounting Lightning Rods on a Roof, Edifice and Communications Towers. This Model is made for 5/8" diameter Copper Clad Rods and its Universal Mounting Feature means that Both the Mount and the Lightning Rod can be Independently Oriented Horizontal or Vertical, assuring that the Horizontal or Vertical surface orientation of the Structure it will be mounted/affixed to will be of no consequence. The Base measures 2-5/8" x 3" square and can be affixed by self-tapping screws, nails or adhesives. The integrated conductor clamp features stainless steel bolt, nut and washer while it can accept the conductor as terminating or pass-through with likewise orientation. Accepts all Class I and Class II Conductors (Lightning Rod, Conductors Not Included)

LRCL-5 5' Foot x 5/8" Copper Clad Lightning Rod for Tower Plates, Caps & Leg Mounts
The LRCL is a 5' Foot x 5/8" Copper Clad Lightning Rod ONLY that comes threaded, with Nut and Washer Hardware, for mounting onto Tower Top Assembly Plates (i.e. ROHN APL25G, APL45G, APL55G, APL4A, APL4HA), Leg Mounts and Caps (i.e. ROHN VW133, VW132, VY1949A, VY1949-A) as well as extraneous Mounts such as the Harger CUBU581 Air Terminal Base.
Installs on most Tower Series Top/Beacon Plates and attachments made for this purpose.

ROHN VW132 Lightning Rod Plate Kit for 45GSR Series Tower Cap Installation
Made in the USA!
The VW132 kit is comprised of (1) 3/16" inch thick Plate with bolts and nuts for installation onto a 45GSR Tower Section leg joint flange as an Assembly for (1) Leg with an additional Hole predrilled for the LRCL Lightning Rod.(available separately). Addition Top Caps are not included in this Kit as only One Lightning Rod is needed and with the leg rails of the Tower section being solid, there is no further need of additional caps to seal from Animal, Insect or Debris accumulation.

ROHN VW133 Lightning Rod Plate Kit for 65G Series Tower Cap Installation
Made in the USA!
The VW133 kit is comprised of (1) 3/16" inch thick Plate with bolts and nuts for installation onto a 65G Tower Section leg joint flange as an Assembly for (1) Leg with an additional Hole predrilled for the LRCL Lightning Rod.(available separately). Two (2) Addition Non-Rod Top Caps with bolts and nuts are included in this Kit as only One Lightning Rod is needed and with the leg rails of the Tower section being hollow, there is further need of additional caps to seal all (3) Rails from Animal, Insect and Debris accumulation.

ROHN VY1949-A Lightning Rod Mounting Kit for Round Tower Leg or Antenna Pipe Mount 2.38"-4.5" OD
Made in the USA!
The ROHN VY1949-A Lightning Rod Clamp-on Mounting Kit is designed to attach a 5/8" Diameter LRCL Lightning Rod (available separately) onto ANY Round ROHN Tower Leg, Antenna Mast Pole or Antenna Pipe Mount having a 2.38" to 4.50" OD and consists of a Hot Dip Galvanized Angle Iron Mount that comes with (2) U-bolts and Nuts available in four sizes; 2.50", 3.00", 3.50" and 4.50" Inside Diameter. Also for installation onto ROHN 80/90 and RTL Towers. Verify the OD of the Leg, Pole or Pipe you wish to attach to, then select the U-bolt Clamp Inside Diameter size accordingly.
For attachment to round members and pipes of 1.25" to 2.5" inch OD, please see the VY1949A

LRCL-4 4' Foot x 5/8" Copper Clad Lightning Rod for Tower Plates, Caps & Leg Mounts
The LRCL-4 is a 4' Foot x 5/8" Copper Clad Lightning Rod ONLY that comes threaded, with Nut and Washer Hardware, for mounting onto Tower Top Assembly Plates (i.e. ROHN APL25G, APL45G, APL55G, APL4A, APL4HA), Leg Mounts and Caps (i.e. ROHN VW133, VW132, VY1949A, VY1949-A) as well as extraneous Mounts such as the Harger CUBU581 Air Terminal Base.
Installs on most Tower Series Top/Beacon Plates and attachments made for this purpose.

LRCL-3 3' Foot x 5/8" Copper Clad Lightning Rod for Tower Plates, Caps & Leg Mounts
The LRCL-3 is a 3' Foot x 5/8" Copper Clad Lightning Rod ONLY that comes threaded, with Nut and Washer Hardware, for mounting onto Tower Top Assembly Plates (i.e. ROHN APL25G, APL45G, APL55G, APL4A, APL4HA), Leg Mounts and Caps (i.e. ROHN VW133, VW132, VY1949A, VY1949-A) as well as extraneous Mounts such as the Harger CUBU581 Air Terminal Base.
Installs on most Tower Series Top/Beacon Plates and attachments made for this purpose.

LRCL-8 8' Foot x 5/8" Copper Clad Lightning Rod for Tower Plates, Caps & Leg Mounts
The LRCL-8 is a 8' Foot x 5/8" Copper Clad Lightning Rod ONLY that comes threaded, with Nut and Washer Hardware, for mounting onto Tower Top Assembly Plates (i.e. ROHN APL25G, APL45G, APL55G, APL4A, APL4HA), Leg Mounts and Caps (i.e. ROHN VW133, VW132, VY1949A, VY1949-A) as well as extraneous Mounts such as the Harger CUBU581 Air Terminal Base.
Installs on most Tower Series Top/Beacon Plates and attachments made for this purpose.

ROHN VY1949A Lightning Rod Mounting Kit for Round Tower Leg or Antenna Pipe Mount 1.25"-2.5" OD
Made in the USA!
The ROHN VY1949A Lightning Rod Clamp-on Mounting Kit is designed to attach a 5/8" Diameter LRCL Lightning Rod (available separately) onto ANY Round ROHN Tower Leg, Antenna Mast Pole or Antenna Pipe Mount having a 1.25" to 2.50" OD and consists of a Hot Dip Galvanized Angle Iron Mount that comes with (2) U-bolts and Nuts. For installation onto ROHN 25G, 45G, 45GSR, 55G, and 65G Towers. Verify the OD of the Leg, Pole or Pipe you wish to attach to, then select the U-bolt Clamp Inside Diameter size accordingly.
For attachment to round members and pipes of 2.5" to 4.5" inch OD, please see the VY1949-A

ROHN AGK1GGX Tower Down Guy Anchor Rod Ground Kit
REV. G Kit. Comprises enough material to ground 3 Anchors. Comes with (3) Ten Foot Ground Rods, (3) Ground Rod Clamps , (3) CPC.5/.75 Anchor Rod Clamp (not included in separate kits from ROHN, but included here) and (3)10 Feet of 7/16  Wire Rope...
This Item Ships LTL Freight ONLY...

ROHN BGK3GGX-1 Tower Base Section Grounding Kit 25G.45G,45GSR,55G,65G and Roof Bases

Made in the USA!The ROHN BGK3GGX-1 is primarily used for grounding the Base Section or Plate  for 25G.45G,45GSR,55G,65G and Roof Bases Towers. Comprises enough material to ground at 1 Tower section joint bolt location. Consists of (1) 15' of 7/16 6x25 EIP IWRC RRL Wire Rope ,(1) 5/8" x 8 Foot  HDG  Ground Rod ,(1) 3/4 Inch Ground Rod Clamp ,(1) CPC1/1.25 Connection Clamp to Section Tubular Rail.  The NEW REV. G Tower structure Grounding Kits use wire rope vs. the solid copper found here, in addition to revised clamping Attachments. 
This Item Ships UPS Package!

ROHN CPC.5/.75 Clamp for Grounding Tower Down Guy Anchor Rods
Made in the USA!
The CPC.5./.75 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the Rod segment of Down Guy Anchors for ROHN Tower Down Guys, by means of affixing these 0.5 to 0.75 inch range Clamps around the solid Rod (0.375 to 1.00 inch actual OD range) component of their Down Guy Anchors that are poured in Concrete. The Clamp Lug also mates the connection to Solid/Stranded Copper or 7/16 6x25 EIP IWRC RRL Wire Rope as supplied in the AGK3GGX REV. G Grounding Kits (not included).
Harger CPC Pipe Ground Clamps compare to Burndy GAR

ROHN CPC1/1.25 Clamp for Grounding 25G 45G Tower and Base Sections
Made in the USA!
The CPC1/1.25 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the ROHN 25G and 45G Main Tower Sections and Fixed Rigid Bases by means of affixing these 1.0 to 1.25 inch range Clamps around at any one of the (3) Tubular Rail (0.9375" - 1.7" OD actual range) components at the lowest visible point possible above grade and in closest proximity to the Ground intended for use as to shorten the wire distance between as much as possible. The Lug also mates the connection to Solid/Stranded Copper or 7/16 6x25 EIP IWRC RRL Wire Rope as supplied in the BGK3GGX REV. G Grounding Kits (not included).
Harger CPC Pipe Ground Clamps compare to Burndy GAR

ROHN BGK3GGX Tower Base Section Grounding Kit for 25G,45G,45GSR,55G,65G and Roof Bases 
New REV. G Grounding Kit for 25G and 45G Guyed Towers. Comprises enough material to ground 1 Tower Base Section Tubular Rail ...

ROHN AGK1G Tower Down Guy Wire Grounding Kit
REV. F Kit. Comprises enough material to ground 3 Down Guy Anchor locations. Comes with (3) Ten Foot Ground Rods, (3) Ground Rod Clamps and 45 Feet ( 3 x 15' ) of #4 Stranded Copper Wire. Select Guy Wire Ground Clamps by Guy Wire size below (see Accessories for this Item)...

3 Star Inc GC-2 Bronze Grounding Clamp for Tower Antenna Mast Pole Pipe Section 1.25" to 2 inch OD
The GC-2 is a Cast Bronze Pipe Clamp that affixes to 1.25" to 2.00 inch OD Tower Section Rails, Base and Antenna Mast, Telescopic Mast Pole, and Pipe, used for Grounding Connections to Ground Rods accommodating Wire from #4 stranded to #10 SOL AWG.
The mirror Back half section is reversible and can be used on ROHN 25G, 45G, 55G and 65G Tower Sections and Bases as well as Universal Towers. Accommodating the most common Antenna Mast, Telescopic Mast Poles and Tower Section Rail sizes from 1.25" to 2 inch OD, remember that the Lowermost section for TM-50 and H-50 Telescopic Masts are 2.25 inches in OD and will not fit.

3 Star Inc CW4S-10 #4 Solid Bare Copper Wire Available in Contiguous 10 Foot Coils
The CW4S-10 Part number is for Ordering 10 feet of #4 Solid Bare Copper Wire used in REV. F Grounding Kits and Arrays of ROHN and Universal Towers in addition to Anchors when Guyed. REV. F Copper Ground Wire Grounding is Installed with Clamps to secure a connection to the Tower Base or Main Section Rail and then run a short distance in attachment to Copper-clad Ground Rods. Satisfactory Grounding is typically achieved through use of separate runs from (2) or more Tower Base Rails, to (1) or more Ground Rods. Priced and Sold in 10' Foot increments for Contiguous Hank Segments for total roll QTY up to 50 Feet, comprising of 10 ft. per unit ordered.

3 Star Inc CW4ST-10 #4 Stranded Solid Bare Copper Wire Available in Contiguous 10 Foot Coils
The CW4ST-10 Part number is for Ordering 10 feet of #4 Stranded Solid Copper Wire used in REV. F Grounding Kits and Arrays of ROHN and Universal Towers in addition to Anchors when Guyed. REV. F Copper Ground Wire Grounding is Installed with Clamps to secure a connection to the Tower Base or Main Section Rail and then run a short distance in attachment to Copper-clad Ground Rods. Satisfactory Grounding is typically achieved through use of separate runs from (2) or more Tower Base Rails, to (1) or more Ground Rods. Priced and Sold in 10' Foot increments for Contiguous Hank Segments for total roll QTY up to 50 Feet, comprising of 10 ft. per unit ordered.

3 Star Inc CW6S-10 #6 Solid Bare Copper Wire Available in Contiguous 10 Foot Coils
The CW46S-10 Part number is for Ordering 10 feet of #6 Solid Bare Copper Wire used in REV. F Grounding Kits and Arrays of ROHN and Universal Towers in addition to Anchors when Guyed. REV. F Copper Ground Wire Grounding is Installed with Clamps to secure a connection to the Tower Base or Main Section Rail and then run a short distance in attachment to Copper-clad Ground Rods. Satisfactory Grounding is typically achieved through use of separate runs from (2) or more Tower Base Rails, to (1) or more Ground Rods. Priced and Sold in 10' Foot increments for Contiguous Hank Segments for total roll QTY up to 50 Feet, comprising of 10 ft. per unit ordered.

3 Star CW10S #10 Solid Copper Ground Wire
25 feet of #10 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by the foot in continuous roll (25 ft. per unit ordered)...

ROHN BGK2GGX Tower Base Section Grounding Kit
New REV. G Grounding Kit for 55G and 65G Guyed Towers. Comprises enough material to ground 1 Tower Base Section Tubular Rail. Consists of (1) 5/8"x10' Ground Rod, (1) Rod Clamp (1) CPC1.5/2 Rail Clamp and 15 feet of 7/16 6x25 EIP IWRC RRL Wire Rope...

3 Star CW12S #12 Solid Copper Ground Wire
25 feet of #12 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by the foot in continuous roll (25 ft. per unit ordered)...

ROHN IWRC 7/16 6x25 EIP IWRC RRL Wire Rope 
New REV. G Grounding cable for use on ROHN Tower Systems. Used for grounding both the tower and down guy components with CPC clamps and Galvanized ground rods (not included). Price is per foot. Enter number of feet desired in quantity box above.

ROHN BGK1GGX Tower Base Section Grounding Kit
New REV. G Grounding Kit for 25G and 45G Guyed Towers. Comprises enough material to ground 1 Tower Base Section Tubular Rail. Consists of (1) 5/8"x10' Ground Rod, (1) Rod Clamp (1) CPC1/1.25 Rail Clamp and 15 feet of 7/16 6x25 EIP IWRC RRL Wire Rope...

ROHN CPC1.5/2 Clamp for Grounding 55G 65G Tower and Base Sections
Made in the USA!
The CPC1.5/2 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the 55G and 65G Main Tower Sections and Fixed Rigid Bases by means of affixing these 1.5 to 2.00 inch range Clamps around at any one of the (3) Tubular Rail (1.25" - 2.4" OD actual range) components at the lowest visible point possible above grade and in closest proximity to the Ground intended for use as to shorten the wire distance between as much as possible. The Lug also mates the connection to Solid/Stranded Copper or 7/16 6x25 EIP IWRC RRL Wire Rope as supplied in the BGK3GGX REV. G Grounding Kits (not included).
Harger CPC Pipe Ground Clamps compare to Burndy GAR

3 Star 500' #10 Solid Copper Ground Wire
25 feet of #10 Solid Copper wire as used for common grounding applications involving Low-Voltage Communications installations like Cable TV, TV Antenna, Satellite TV and Wireless Internet. Priced and sold by in continuous roll (500 ft. per unit ordered)...

Holland Electronics GRB-1 Single F-81 Ground Block
is a zinc anti-corrosive standard Ground block that accomodates a 12 AWG Ground Wire with ease...

Holland Electronics GRB-2 Dual F-81 Ground Block
is a zinc anti-corrosive standard Ground block that accomodates a 12 AWG Ground Wire with ease...

Holland Electronics GRB-2-B Dual F-81 Ground Block
is a zinc anti-corrosive standard Ground block that accomodates 2 Coaxial Cables and a 12 AWG Ground Wire with ease...

Holland Electronics GRB-2DHR Grounding Block for Dual RG Coaxial Cable TV Satellite Antenna
Appears on the DISH Network Approved List!
The GRB-2DHR is a 3 GHz passband high performance ground block featuring a zinc body with machined threads and multiple ground screw configurations that accommodates a 12 AWG Ground Wire with ease. These grounding blocks are nickel plated and utilize stainless steel ground screws for maximum indoor/outdoor survivability.

ASKA GB-5UL Grounding Block with Quad F-81 3GHz Barrel Ports for RG Coaxial Cable TV Satellite
Appears on the DISH Network Approved List!
The GB-5UL is a High Performance 3 GHz Satellite Grade Ground Block featuring a zinc body with machined threads, multiple ground screw configurations and (4) F-81 Barrel Connectors. These grounding blocks are nickel plated and utilize stainless steel ground screws for maximum indoor/outdoor survivability. Ground block accommodates a 12 AWG Ground Wire with ease.

TnB TNB4002 J Water Pipe Ground Clamp
Appears on the DISH Network Approved List!
Use this pipe ground clamp to create an electrical ground between a 1/2 to 1 inch water pipe, copper water pipe or copper ground wire...

TnB TNB4004 I-Beam Ground Clamp
Appears on the DISH Network Approved List!
This clamp is used to bond a solid or stranded copper wire to a steel structure. It is mechanically galvanized ASTM B695...

TnB TNB4003 Aluminum Dual Ground Lug
Appears on the DISH Network Approved List!
This dual ground lug is used as a double barrel ground lug for bolted connection to frame or part...

TnB TNB4009 9 inch Copper Ground Strap
Appears on the DISH Network Approved List!
This 9 inch copper strap is used for a 1/2 to 2-1/4 inch diameter pipe connection to a #10/12/14 AWG copper ground wire...

TnB TNB4008 6 inch Copper Ground Strap<
Appears on the DISH Network Approved List!
>This 6 inch copper strap is used for a 1/2 to 1-1/4 inch diameter pipe connection to a #10/12/14 AWG copper ground wire...

Blackburn ADR25-21 Aluminum Mechanical Connector 6 AWG–250 kcmil Dual Termination
The ADR25-21 is a Tin-plated Aluminum Block Lug, Non-Insulated Mechanical Connector measuring 2.56"L x 1.64"W x 1-3/16"H. The Barrel Openings are 5/8" ID, entry from Front and Back with a Hex Set Screw that accommodates from 6 AWG up to 250 kcmil of both Aluminum and Copper Conductors for mounting upon a single post 3/8" stud.
On Tower Installations, this lug is usually mounted using the section joint bolt, replaced with one 1/4" longer in length to account for the 1/4" Tab thickness of the lug, then connecting the Ground Wire conductors from the Tower base to the Ground Rods or Array.

Blackburn ADR25 Aluminum Mechanical Connector 6 AWG–250 kcmil Single Termination
The ADR25 is a Tin-plated Aluminum Block Lug, Non-Insulated Mechanical Connector measuring 2"L x 1"W x 1.125"H. The Barrel Opening is 5/8" ID, entry from Front and Back with a Hex Set Screw that accommodates from 6 AWG up to 250 kcmil of both Aluminum and Copper Conductors for mounting upon a single post 5/16" stud.
On Tower Installations, this lug is usually mounted using the section joint bolt, replaced with one 1/4" longer in length to account for the 1/4" Tab thickness of the lug, then connecting the Ground Wire conductor from the Tower base to the Ground Rod or Array.

MacLean 438ALC 3/16 to 1/2 inch Strand Down Guy Wire Ground Clamp
Used to make an electrical connection between OSP Strand Messenger Cable or Tower Down Guy Strand with up to #2 AWG ground wire.
ROHN Part #340028
Up to 7/16EHS strand size, Constructed of aluminum.

GCA-1 Alumnium Ground Clamp

Use this Alumnium  ground clamp to create an electrical ground between a 1/2 to 1-1/4"  inch Tower Leg ,water pipe, copper water pipe or copper ground wire...

ROHN R-340020 5/8" x 8' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

ROHN BGK2G Tower Base Section Grounding Kit REV F
Made in the USA!
The ROHN BGK2G is primarily used for grounding the Base Section or Plate of 25G,45G,55G and 65G REV. F Towers, also used in Self-Supporting Tower Kits. Comprises enough material to ground at 1 Tower section on Tubular Rail. Consists of (1) 5/8"x8' Ground Rod, (1) 5/8"x8' Ground Rod Clamp (1) 1-1/4 to 2" inch J-Clamp and 10 feet of #4 Solid Copper Wire. These are REV. F Tower structure Grounding Kits. The NEW REV. G Tower structure Grounding Kits use wire rope vs. the solid copper found here, in addition to revised clamping Attachments. (see BGK2GGX)
Terminal Lug does NOT come compressed onto the copper wire from the Factory.
This Item Ships UPS Package!

GR8GROD 5/8" x 8' Galvanized Ground Rod
Galvanized over Electrolytic Copper On Steel Core. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

ROHN R-340021 5/8" x 10' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

3 Star 4GR 3/8" x 45" Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, 3/8" ground rod for use when grounding off-air antennas and satellite dishes. Includes preinstalled ground clamp...

TnB TNB4014 G5 5/8 inch Bronzed Ground Rod Clamp
Appears on the DISH Network Approved List!
Cast of high-strength corrosion-resistant Bronze. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection...

3 Star GRC-3/4 3/4 inch Bronzed Ground Rod Clamp
Cast of high-strength corrosion-resistant Bronze. UL listed for direct burial. Furnished with hex head bolts. Simplified, compact design makes lasting, trouble-free connection to Wire Range #10 Solid through #2 Stranded. Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. G Grounding of Tower Base and Down Guys onto 5/8 inch Ground Rods using the 7/16 wire rope ground specified. Select Ground Rod length by application (see details)...

ASKA SB-4UL Split Bolt Connector for #4 #6 #8 Solid Core Copper Wire
Appears on the DISH Network Approved List!
This SB-4UL is a High Strength Split Bolt Connector, Equal Main and Tap Range from #4 Solid #6 Solid and #8 Solid, Conductor Range 14 Solid, Pressure Bar Material Copper.

ASKA SB-8UL Split Bolt Connector for #8 #10 Solid Core Copper Wire
Appears on the DISH Network Approved List!
This SB-8UL is a High Strength Split Bolt Connector, Equal Main and Tap Range 8 Solid to 10 Solid, Conductor Range 14 Solid, Pressure Bar Material Copper.

3 Star Inc GRKIT-MAST Ground Rod, Clamp and Wire Kit for Telescopic and Antenna Mast Poles
The GRKIT-MAST Universal Grounding Kit is for most Telescopic, Antenna Mast and Pole Mounts of 2" OD or less that includes a Ground Rod, Ground Wire and 2" OD Heavy Duty Copper Pipe Clamp.

3 Star Inc GRKIT-ANT Ground Rod, Clamp and Wire Kit for Satellite Cable TV and Antennas
The GRKIT-ANT Universal Grounding Kit is for most Satellite Dish, Off-Air Antenna TV and Digital Antennas that includes a Ground Rod, Ground Wire and Single F Port Coaxial Ground Block.

GR-4 -  5/8" x 4' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

GR8GROD 5/8" x 10' Galvanized Ground Rod

A Galvanized ground rod that is 5/8 in. nominal in diameter with a length of 10 ft . Zinc-Coated exteriors are hot-dip galvanized for solid protection against corrosion , The ground rod meets NEC , UL and in accordance with ASTM® , use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with 7/16 inch IWRC wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating sealant tape). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details).......

Senior Industries SI-GB-50L Single Port Coaxial Cable TV Antenna Grounding Block
The SI-GB-50L 2.2 GHz passband Single Port Coaxial Cable Ground Block that features a Single, 1 Sealed Gasket Long F Connector Barrel Port in a Stainless Steel Ground Block that accommodates up to a #10 AWG Ground Wire (Available Separately) with ease primarily for Outdoor use, but can be used in Crawlspaces or at Roof level where necessary as long as the Ground wire is as short as possible to the Ground connection of either the Electrical Power Ground Rod, Electrical Meter Base Box, Common Communications Bonding location or your own Ground Rod. (Available Separately)

PPC  PPF81GND1SS Single F-81 Ground Block , single barrel, stainless steel.

PPC’s series ground blocks offer superior corrosion resistance via stainless steel and nickel-plated brass construction with the option of port seals. PPC’s ground blocks also provide mounting flexibility and multiple ground conductor entry points. that accomodates up to a #10 AWG Ground Wire with ease...