3 Star Inc EZ 43-A 3-Way Down Guy Ring with Adjustable Collar for 1.25 inch Antenna Mast Pole
Made in the USA!
The EZ 43-A is an Adjustable Level Down Guy Ring for 3-Way guying of Antenna masts at any height along the 1-1/4" OD mast pole with Screw Eye Bolts to affix 620 guy wire. It can be used for supplementing or repairing existing installations or when configuring your own New Installation or Antenna Mast Extension.
(Mast and Guy Wire Not Included).

3 Star Inc EZ 62A 1" Slit Corrugated Loom Tubing Cable and Down Guy Wire Cover
Made in the USA!
This is Corrugated Loom Tubing Slit, 1" (25.4mm) x 7 feet, Yellow UV resistant for applications where Spiral Wrap or Braided Expandable Sleeving may be difficult to install over the guy wire as a guard or they do not offer the amount of protection required. This can also be used in conduit applications to protect individual or grouped wires and cables when routed to their destination connection.

PLP 115-Guy Guard Round Yellow Plastic Polypropylene Guy Marker
The PLP 115 Down Guy Wire Marker Guards are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed Utility Pole and Tower down guy wires. Measures 1-1/2" X 8' with Stainless Steel Clamp that secures onto Strand at Top end.

3 Star Inc 70-7YTIE Round Yellow Plastic Polypropylene Down Guy Wire Guard Marker
The 3 Star 70-7YTIE Guy Marker Guards are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed Utility Pole and Tower down guy wires. Measures 1-1/4" X 8' with Plastic Tie that loops through Preform Dead-end at Anchor Termination.

3 Star Inc GR-2 4-Way Brace Ring Collar for Non-Penetrating Roof Mount Antenna Mast
Made in the USA!
For Non-Penetrating Flat Roof Mount Assemblies with Adjustable mount, 4-way Leg attachment and Set Screws for supporting Antenna Masts from 1-1/4 up to 2-3/8" in Diameter. Can Be used for Repair, Replacement or in New Build Kits

3 Star Inc GR-2-A Adjustable 4-Way Down Guy Ring for 1-1/4" to 2-1/4" OD Antenna Mast
Made in the USA!
Adjustable Height and Diameter Antenna Mast Down Guy Ring used in 4-Way guying of Antenna Masts with Forged Eye Bolts to affix 618/620 guy wire, Fits Masts from 1-1/4 up to 2 1/4" for Ground Base or FRM Frame Mount Guying (Mast, Wire, Anchors, Base Not Included). Galvanized for Corrosion protection.

3 Star Inc EZ48 48" inch Screw Anchor for Telescopic Antenna Mast Down Guy
Made in the USA!
This 48" long Screw-in Earth Anchor with 5/8" Rod and a 6" Helix is Hot Dip Galvanized (HDG) for attaching down guy wire when Guying ROHN H20, H30, H40, H50 and Easy Up TM20, TM30, TM40, TM50 Telescopic Antenna Masts.

ROHN GAS604 48" inch Screw Anchor for Telescopic Antenna Mast Down Guy
Made in the USA!
This 48" long Screw-in Earth Anchor with 5/8" Rod and a 6" Helix is Hot Dip Galvanized (HDG) for attaching down guy wire when Guying ROHN H20, H30, H40, H50 and Easy Up TM20, TM30, TM40, TM50 Telescopic Antenna Masts.

ROHN GAS625 48.5 " Telescopic Antenna Mast Down Guy 10" Helix Screw Anchor
Made in the USA!
48" long Screw Anchor for Guying ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Antenna Masts down to the Ground, HDG, 5/8" Rod with 6" Disk Diameter ...

3 Star Inc EZ30 30" inch Screw Anchor for Telescopic Antenna Mast Down Guy
Made in the USA!
This 30" long Screw-in Earth Anchor with 7/16" Rod and a 4" Helix is Hot Dip Galvanized (HDG) for attaching down guy wire when Guying ROHN H20, H30 and Easy Up TM20, TM30 Telescopic Antenna Masts.

ROHN GAS4303 30" inch Screw Anchor for Telescopic Antenna Mast Down Guy
Made in the USA!
This 30" long Screw-in Earth Anchor with 1/2" Rod and a 3" Helix is Hot Dip Galvanized (HDG) for attaching down guy wire when Guying ROHN H20, H30 and Easy Up TM20, TM30 Telescopic Antenna Masts.

3 Star Inc 618 Down Guy Wire in Contiguous 1000 feet for Antenna Mast Pole
This is 1000 feet in total, comprised of Twenty 50 foot Hank coils of Heavy Duty Pre-Galvanized 6 Strand, 18 AWG Guy Wire for Guying Down Telescopic Antenna Masts. Comes in Contiguous Footage totaling 1000 feet with 700 lbs. Breaking Strength.

3 Star Inc 618-50 618 Down Guy Wire in 50 ft Hanks up to 1000' for Antenna Mast Pole
50 foot segment of 6 Strand, 18 AWG Steel Antenna Mast Down Guy Wire for Light, Medium and some Heavy Duty Antenna Mast Guying installations. Comes as 50 foot Hank section for each order with multiple quantities ordered coming in continuous footage up to 1000 feet.

3 Star Inc EZ 60 620 Plastic Coated Down Guy Wire 1000' ft for Antenna Mast Pole
Comes as linked 50 foot hank segments of Plastic Coated 6 Strand, 20 AWG Steel Down Guy Wire for Guying Light to Medium Duty Antenna Mast and Telescopic Poles. Each Order is for Twenty 50 foot Hank Sections in continuous footage totaling 1000 feet.

3 Star Inc H203WAYGUY 3-Way Down Guy Wire Kit for 20 Foot Telescopic Antenna Mast
This H203WAYGUY Kit is a 3-way Down Guy Wire and Anchor package to secure your ROHN H20 and Easy Up TM20 Telescopic Push Up Antenna Masts at 2 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

3 Star Inc H303WAYGUY 3-Way Down Guy Wire Kit for 30 Foot Telescopic Antenna Mast
This H303WAYGUY Kit is a 3-way Down Guy Wire and Anchor package to secure your ROHN H30 and Easy Up TM30 Telescopic Push Up Antenna Masts at 3 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

3 Star Inc H403WAYGUY 3-Way Down Guy Wire Kit for 40 Foot Telescopic Antenna Mast
This H403WAYGUY Kit is a 3-way Down Guy Wire and Anchor package to secure your ROHN H40 and Easy Up TM40 Telescopic Push Up Antenna Masts at 4 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

3 Star Inc H503WAYGUY 3-Way Down Guy Wire Kit for 50 Foot Telescopic Antenna Mast
This H503WAYGUY Kit is a 3-way Down Guy Wire and Anchor package to secure your ROHN H50 and Easy Up TM50 Telescopic Push Up Antenna Masts at 5 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options. (Mast is not included)

3 Star Inc H204WAYGUY 4-Way Down Guy Wire Kit for 20 Foot Telescopic Antenna Mast
This H204WAYGUY Kit is a 4-way Down Guy Wire and Anchor package to secure your ROHN H20 and Easy Up TM20 Telescopic Push Up Antenna Masts at 2 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

3 Star Inc H304WAYGUY 4-Way Down Guy Wire Kit for 30 Foot Telescopic Antenna Mast
This H304WAYGUY Kit is a 4-way Down Guy Wire and Anchor package to secure your ROHN H30 and Easy Up TM30 Telescopic Push Up Antenna Masts at 3 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

3 Star Inc H404WAYGUY 4-Way Down Guy Wire Kit for 40 Foot Telescopic Antenna Mast
This H404WAYGUY Kit is a 4-way Down Guy Wire and Anchor package to secure your ROHN H40 and Easy Up TM40 Telescopic Push Up Antenna Masts at 4 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

3 Star Inc H504WAYGUY 4-Way Down Guy Wire Kit for 50 Foot Telescopic Antenna Mast
This H504WAYGUY Kit is a 4-way Down Guy Wire and Anchor package to secure your ROHN H50 and Easy Up TM50 Telescopic Push Up Antenna Masts at 5 levels. Guy wire gauge, Anchor size and Base Mount are Selectable Options.
(Mast is not included)

Gripple TGTTP Tensioning Tool for Gripple Wire Rope Grip on Antenna Mast Down Guy
The TGTTP is Intended for use concurrently with the 1/8" Gripple wire rope grip. The Gripple Tensioning Tool has a 6:1 mechanical advantage and is ideal for applications where high tensions are required. Manufactured with hardened steel and engineering grade polymers, it will handle up to 800 lbs. of tension.

3 Star Inc EZ 60-50 620 Plastic Coated Down Guy Wire in 50 ft Hanks for Antenna Mast
This is 6 Strand, 20 AWG Steel Down Guy Wire, Plastic Coated for Guying Light to Medium Duty Antenna Mast and Telescopic Poles. As a 50 foot Hank section, with multiple orders placed, the total quantity comes in continuous footage up to 1000 feet in (1) box.

3 Star Inc EZ 60A 620 Down Guy Wire in Contiguous 1000' ft for Antenna Mast Pole
Comes as linked 50 foot hank segments of 6 Strand, 20 AWG Steel Down Guy Wire for Guying Light to Medium Duty Antenna Mast and Telescopic Poles. Each Order is for Twenty 50 foot Hank Sections in continuous footage totaling 1000 feet.

3 Star Inc EZ 60A-50 620 Down Guy Wire in 50' Hanks up to 1000' feet for Antenna Mast
This is 6 Strand, 20 AWG Steel Down Guy Wire for Guying Light to Medium Duty Antenna Mast and Telescopic Poles. As a 50 foot Hank section, with multiple orders placed, the total quantity comes in continuous footage up to 1000 feet in (1) box.

3 Star Inc 620-500 620 Plastic Coated Down Guy Wire for Antenna Mast Pole 500' Feet
This is 500 feet of Plastic Coated over Galvanized 6 Strand, 20 AWG Guy Wire for Light Duty Antenna Mast Guying. Comes in Ten contiguous 50 foot hanks for a total of 500' feet. Strip Plastic off before Terminating Down Guy ends with cable clamps.

3 Star Inc 3/8X6TBE&J Turnbuckle for Tower Down Guy 3/8" x 6" Eye to Jaw
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Open Body, Working Load Limit: 1200 lbs. Ultimate Strength: 6000 lbs. The Turnbuckle eye is elongated to reduce stress on eye and make it easier for Thimbles and other hardware to pass through.

3 Star Inc 1/4THH 1/4 inch Heavy Duty Open Eye Down Guy Wire Rope Thimble
For use in forming Down Guy Dead-ends with 3/16" Bare Strand and Cable Clamps or 618, 620 Telescopic Antenna Mast Down Guy Wire Rope using several 1/8 inch Cable Clamps.

3 Star Inc 1/8CCF 1/8" Forged Steel Galvanized Cable Clamp for 620 618 Stranded Guy Wire
The 1/8 CCF is a forged steel cable clamp for use on stranded wire rope and cable used for Down Guys on Antenna Masts. Use (3) of these in succession on both Turnback (Looped Back onto Itself) Termination ends of 620 and 618 stranded wire when attaching to guy rings and anchors respectively. Used for Telescopic Mast and Antenna Mast Pole Down Guys in both Temporary and Permanent Scenarios.

Gripple 1/8GRPL 1/8" inch Wire Rope Grip for 620 for Antenna Mast Down Guy
The 620GRPL is used when Terminating 620 Antenna Mast Down Guy Stranded Wire. Used in Telescopic and Regular TV Antenna Mast Down Guys to easily Secure and Tension and then release/re-tension when necessary for Multiple Guy Wires at the Anchor end.
The Gripple TGTTP Tool (not included) makes tensioning a breeze and is for use with these Gripple Grips.

Gripple 61820GRPL 1/8" inch Wire Rope Grip for 618/620 for Antenna Mast Down Guy
The 61820GRPL is used when Terminating 620 and 618 Antenna Mast Down Guy Stranded Wire. Used in Telescopic and Regular TV Antenna Mast Down Guys to easily Secure and Tension and then release/re-tension when necessary for Multiple Guy Wires at the Anchor end.
The Gripple TGTTP Tool (not included) makes tensioning a breeze and is for use with these Gripple Grips.

Gripple 3/16GRPL 3/16" inch Wire Rope Grip for Ceiling Panel Suspension, Fencing & Down Guy
The 3/16GRPL is used when Terminating 3/16" inch Wire Rope Grip for Ceiling Panel Suspension, Fencing & Down Guy to easily Secure and Tension and then release/re-tension when necessary.
This Gripple is more acclimated for use with finely woven small gauge stranded wire cable rope and will not support the tensile strength of Solid Hi-Tensile, Barbed wire or EHS Utility Strand at Tension.
The Gripple TGTTP Tool (not included) makes tensioning a breeze and is for use with these Gripple Grips.

Gripple 3/8GRPL 3/8" inch Wire Rope Grip for Ceiling Panel Suspension, Fencing & Down Guy
The 3/8GRPL is used when Terminating 3/8" inch Wire Rope Grip for Ceiling Panel Suspension, Fencing & Down Guy to easily Secure and Tension and then release/re-tension when necessary.
This Gripple is more acclimated for use with finely woven small gauge stranded wire cable rope and will not support the tensile strength of Solid Hi-Tensile, Barbed wire or EHS Utility Strand at Tension.
The Gripple TGTTP Tool (not included) makes tensioning a breeze and is for use with these Gripple Grips.

Gripple 1/4GRPL 1/4" inch Wire Rope Grip for Ceiling Panel Suspension, Fencing & Down Guy
The 1/4GRPL is used when Terminating 1/4" inch Wire Rope Grip for Ceiling Panel Suspension, Fencing & Down Guy to easily Secure and Tension and then release/re-tension when necessary.
This Gripple is more acclimated for use with finely woven small gauge stranded wire cable rope and will not support the tensile strength of Solid Hi-Tensile, Barbed wire or EHS Utility Strand at Tension.
The Gripple TGTTP Tool (not included) makes tensioning a breeze and is for use with these Gripple Grips.