EZ 5-16 5' Foot Antenna Mast Pole Pre-galvanized 1.25" inch Diameter 16 AWG Pipe
Made in the USA!
This 5 ft Antenna Mast Pole for Medium to Heavy Duty Outdoor Antenna mounting, made of a 1-1/4 inch pre-galvanized 16 gauge Pipe. Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry, CB, HAM and more!
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc 5994 1.66 to 2 Inch OD Combination Satellite Dish TV Antenna Mast Pole Pipe
This Antenna Mast Pipe features 1.66" OD on one end with 2.00" OD on the other end of a 28" long 16 AWG Galvanized Antenna Mast Pole Pipe.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3Star Inc 5991 2.00" OD x 5' (53" inch) 18 AWG Galvanized Antenna Mast Pole
Made in the USA!
Ideal as a Super DISH, Wild Blue and Starlink Dish Antenna Mast for Ground or Wall mount Installation (Mount Not Included). Sturdy One Piece 53" in length that Fits a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc EZ 5-18 1.25 inch OD by 5 foot long Outdoor Antenna Mast Pole 18 AWG Pipe
Made in the USA!
This is a 1.25" OD by 60" long (5 Foot) 18 AWG Pre-galvanized Light to Medium Duty Antenna Mast Pole Pipe. This 1-1/4 inch Diameter Antenna Mast is Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry and more.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star 5996 6 Foot 1.66 O.D. Steel Satellite Dish Ground Pole Mast
This DBS DSS Satellite Dish Antenna Mast Pole is a Sturdy One Piece that Fits a Variety of Mounts for Flexibility In Off-Air HDTV and Satellite Antenna Mounting and Height Clearance. Ideal as a DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5) for Ground or Wall mount Installation.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

EZ 10-16 10 Foot x 1.25 inch OD 16 AWG Galvanized Antenna Mast Pole Pipe
Made in the USA!
This is a 10 Foot (120") by 1.25" OD 16 AWG Galvanized Antenna Mast
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
This Item Ships LTL Freight ONLY.

3 Star Inc EZ 10-18 1.25 inch OD by 10 foot long Outdoor Antenna Mast Pole 18 AWG Pipe
Made in the USA!
This is a 1.25" OD by 120" long (10 Foot) 18 AWG Galvanized Light to Medium Duty Antenna Mast Pole Pipe. This 1-1/4 inch Diameter Antenna Mast is Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry and more.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
This Item Ships LTL Freight ONLY.

3 Star Inc EZ 8-16 1.25 inch OD by 8 foot long Outdoor Antenna Mast Pole 16 AWG Pipe
Made in the USA!
This is a 1.25" OD by 96" long (8 Foot) 16 AWG Pre-galvanized Light to Medium Duty Antenna Mast Pole Pipe. This 1-1/4 inch Diameter Antenna Mast is Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry and more.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc EZ 8-16S 8' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 8 Foot (96") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 8 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

3 Star Inc EZ 6-18-1 1 inch OD by 6 foot long Outdoor Antenna Mast Pole 18 AWG Pipe
Made in the USA!
This is a 1.00" OD by 72" long (6 Foot) 18 AWG Pre-galvanized Light Duty Antenna Mast Pole Pipe. This Diameter Antenna Mast is Lightweight and lends itself ideal for smaller Antennas not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry and more.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc EZ 8-18 1.25 inch OD by 8 foot long Outdoor Antenna Mast Pole 18 AWG Pipe
Made in the USA!
This is a 1.25" OD by 96" long (8 Foot) 18 AWG Pre-galvanized Light to Medium Duty Antenna Mast Pole Pipe. This 1-1/4 inch Diameter Antenna Mast is Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry and more.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc EZ 8-18S 1.25 inch OD by 8 foot long Outdoor Antenna Mast Pole 18 AWG Swaged Pipe End
Made in the USA!
This 8 Foot (96") by 1.25" OD 18 AWG Swaged End Light to Medium Duty Antenna Mast tube is pre-galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 8 feet to fit a Variety of Mounts for Flexibility In Light to Medium Duty Antenna Mounting and Height Clearance.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc EZ 10-16S 10' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 10 Foot (120") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 10 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)
This Item Ships LTL Freight ONLY.

3 Star Inc EZ 10-18S 1.25 inch OD by 10 foot long Outdoor Antenna Mast Pole 18 AWG Swaged Pipe End
Made in the USA!
This 10 Foot (120") by 1.25" OD 18 AWG Swaged End Light to Medium Duty Antenna Mast tube is Pre-galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 10 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)
This Item Ships LTL Freight ONLY.

3 Star Inc 5996S 1.66" inch OD x 57" inch 18 AWG Satellite Dish TV Antenna Mast Pole Pipe Swaged End
Made in the USA!
This 5 Foot (57") by 1.66" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1.66 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Ideal as a DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5)
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

3 Star Inc 3S-5-150S 5' Foot x 1.50" inch OD 18 AWG Satellite Dish TV Antenna Mast Pole Pipe Swaged
This 5 Foot (60") by 1.50" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Ideal as a TV, Radio, WISP, Wireless Internet, Cellular, DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5) for Ground or Wall mount Installation.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

3 Star Inc EZ 5-16S 5' Foot x 1.25" inch OD 16 AWG Swaged Galvanized Antenna Mast Pole Pipe
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)

3 Star Inc EZ 5-18S 1.25 inch OD by 5 foot long Outdoor Antenna Mast Pole 18 AWG Swaged Pipe End
Made in the USA!
This 5 Foot (60") by 1.25" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Light to Medium Duty Antenna Mounting and Height Clearance.
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

3 Star Inc EZ 5-200S 2.00" OD x 5' (53 inch) 18 AWG Swaged End Antenna Mast Pole
Made in the USA!
This 5 Foot (53") by 2.00" OD 18 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 2 inch 18 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube of the same diameter and gauge, thereby extending the existing mast an additional 5 feet to fit a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.
Manufacturers recommend that masts heights of 10 feet and higher be guyed for Addition Wind Load Support.
(Mount Not Included)