ROHN SHRM Sawhorse Style Parabolic Dish Antenna Peak or Pitched Roof Mount
Made in the USA!
Capable of supporting most TVRO, PCS, Cellular, and Microwave antennas (not included). The Sawhorse Roof Mount allows for placement of antennas on the roof peak with up to a 12”/12” pitched roof and can also be placed on flat roof.
Optional Mounting Pipe for Antennas sold separately (see Details).

ROHN URM Universal Roof Antenna Mast Mount for Peak and Pitched Installations
Made in the USA!
This Antenna Roof Mast Mount is Capable of supporting most TVRO, PCS, Cellular, and Microwave antennas via your selection of an Optional 30" High Mast Pipe from 2-1/2 to 4 Inches in OD. The Universal Roof Mount adapts to various roof pitches and the fully adjustable rear-leg allows for use on a flat or up to a 12”/12” pitched roof. This penetrating Roof Mount is galvanized for corrosion protection, goes together quickly and is easily shipped via UPS.
Optional Mounting Pipe for Antennas sold separately (see Details).
Mounting Hardware to affix Mount to Roof Not included

3 Star Inc EZ70 Antenna Mast Bracket for Small Vent Pipe 2.5" to 3.75" OD Mount
Made in the USA!
The EZ 70 Roof Vent Pipe Antenna Mast Mounting Bracket is for Mounting Satellite Dish and Off Air TV Antenna to Vent Pipes from 2.5" to 3.75: inches in Outside Diameter. Mast Mount with Hardware (Mast Not Included).

3 Star Inc EZ70W Antenna Mast Bracket for Large Vent Pipe 2.5" - 5.5" OD Mount
Made in the USA!
The EZ 70W Roof Vent Pipe Antenna Mast Mounting Bracket is for Mounting Satellite Dish and Off Air TV Antenna to Larger Vent Pipes from 2.5" to 5.5" inches in Outside Diameter. Mast Mount with Hardware (Mast Not Included).

ROHN ETMB Roof Antenna Base Mount for Telescopic and Mast Pole up to 2-1/4" OD
Made in the USA!
This ROHN ETMB Universal Roof Antenna Mount Base is made for installing Telescopic and ANY Antenna Mast Poles up to 2.25 inch Outside Diameter on a Flat or Pitched Roof, providing your installation assures both structural and moisture barrier integrity. The Bottom of Mast inserts into the Hinged Clamp, Adjustable for Antenna Masts up to 2.25 inches in Diameter. Bonding should be made by affixment to Mast.
Will Also Accommodate Telescopic Masts:
ROHN H20 H30 H40 H50 and Easy Up TM-20 TM-30 TM-40 TM-50
Manufacturers recommend that mast heights of 10 feet and higher above the uppermost Support or Bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance

Easy Up EZ 19B Base for Antenna Roof Mount fits 1-1/2" to 2-1/2" OD Mast Pole
Made in the USA!
This EZ19B Heavy Duty Antenna Roof Mount Base is for Installation of Telescopic or ANY Antenna Mast Pole 1.50" to 2.50" in Outside Diameter on a Flat, Pitched or Peaked Roof. This Heavy Duty Range Base is comprised of Galvanized 16 gauge steel Swivel Feet that conform to Peak or Pitched Roof contours allowing the Mast to be Raised and Lowered in place, secured with a galvanized 16 gauge 2-3/4" ID Collar and (2) Double Nut set screws.
(Mounting Hardware and Pitch Pads Not included)
Mast will require Down Guys to remain in place against wind-load.
Will Also Accommodate Telescopic Masts:
ROHN H40 H50 and Easy Up TM-40 TM-50

Easy Up EZ 19 Base for Antenna Roof Mount fits 1" to 1-1/4" OD Mast Pole
Made in the USA!
This EZ19 Heavy Duty Antenna Roof Mount Base is for Installation of ANY Antenna Mast Pole 1" to 1-1/4" in Outside Diameter on a Flat, Pitched or Peaked Roof. This Heavy Duty Range Base is comprised of Galvanized 16 gauge steel Swivel Feet that conform to Peak or Pitched Roof contours allowing the Mast to be Raised and Lowered in place, secured with a galvanized 16 gauge 1-3/8" ID Collar and (2) Double Nut set screws.
(Mounting Hardware and Pitch Pads Not included)
Mast will require Down Guys to remain in place against wind-load.

Easy Up EZ 19A Base for Antenna Roof Mount fits 1.50" to 2.00" OD Mast Pole
Made in the USA!
This EZ19A Heavy Duty Antenna Roof Mount Base is for Installation of Telescopic or ANY Antenna Mast Pole 1.50" to 2.00" in Outside Diameter on a Flat, Pitched or Peaked Roof. This Heavy Duty Range Base is comprised of Galvanized 16 gauge steel Swivel Feet that conform to Peak or Pitched Roof contours allowing the Mast to be Raised and Lowered in place, secured with a galvanized 16 gauge 2-1/8" ID Collar and (2) Double Nut set screws.
(Mounting Hardware and Pitch Pads Not included)
Mast will require Down Guys to remain in place against wind-load.
Will Also Accommodate Telescopic Masts:
ROHN H20 H30 and Easy Up TM-20 TM-30

Easy Up EZ 17 Base for Antenna Roof Mount fits 1" to 1-1/4" OD Mast Pole
Made in the USA!
This EZ17 Economy Antenna Roof Mount Base is for Installation of ANY Antenna Mast Pole 1" to 1-1/4" in Outside Diameter on a Flat, Pitched or Peaked Roof. This Economy Range Base is comprised of Galvanized 18 gauge Swivel Feet that conform to Peak or Pitched Roof contours allowing the Mast to be Raised and Lowered in place, secured with a galvanized 18 gauge 1-3/8" Collar and (2) set screws.
(Mounting Hardware and Pitch Pads Not included)
Mast will require Down Guys to remain in place against wind-load.
See EZ 19 series for Heavy Duty Version

Easy Up EZ 17A Base for Antenna Roof Mount fits 1-1/2" to 1-3/4" OD Mast Pole
Made in the USA!
This EZ17A Economy Antenna Roof Mount Base is for Installation of ANY Antenna Mast Pole 1-1/2" to 1-3/4" in Outside Diameter on a Flat, Pitched or Peaked Roof. This Economy Range Base is comprised of Galvanized 18 gauge Swivel Feet that conform to Peak or Pitched Roof contours allowing the Mast to be Raised and Lowered in place, secured with a galvanized 18 gauge 1-7/8" ID Collar and (2) set screws.
(Mounting Hardware and Pitch Pads Not included)
Mast will require Down Guys to remain in place against wind-load.
See EZ 19 series for Heavy Duty Version

3 Star Inc SKYUC Antenna to Mast Mounting Clamps 2 Piece U-Bolt Nest Assembly Hardware
This U-bolt kit can be used to secure an antenna mast of up to 1-3/4" inch diameter. 2 U-bolts per package.
Used to bolt some small sized Yagi Style Antenna Booms to an DBS Antenna J-Mount for Roof or Eave. May Require Field Drilling to Antenna Boom. Also used to clamp 18 gauge securely to another mast section nested inside to maintain physical connection and height.

3 Star Inc SKY6017 Antenna Mast Wall Mount Bracket with Universal Swivel Base<
The SKY6017 is for mounting TV antennas and dish receivers on mast configurations with a swivel design that allows for greater mounting flexibility in tight places. The U-Bolt can be mounted on either side of the base plate and then adjusted to the desired position, accommodating masts up to a 1.75” outer diameter. (Sold Separately)