ROHN NPPK Non-Penetrating Satellite Dish Antenna Roof Peak Mount
Made in the USA!
This Non-Penetrating Peak Roof Mount is a great solution for broadband antennas and satellite TV dishes. The adjustable mounting plate can be center mounted or to one side as needed to accommodate Your Satellite TV Dish Mount (not included). The 1LG mount with a base and 1-1/4” mounting tube is also an OPTIONAL Dish Mount for the NPPK (not included). It is comprised of (2) standard Non-Pen Ballast Trays hinged to straddle over the Peak of the Roof accommodating up to 16 Standard sized Cinder Blocks. Uses (2) FRMMATs (Not included) for Barrier between the trays and roof surface in Non-Penetrating Applications or can be simply affixed directly to the roof Hardware and Pitch Pads as in standard penetrating applications (Not included).

3 Star Inc 3MS80 Small Mast Tube Mount Bracket for Flat Base Mount Low Intensity Obstruction Light
3Starinc’s 3MU80 Small Mast Tube Mount for Flat Base Mount Low Intensity Obstruction Lights provides a means to Mount a Post Style Obstruction Light Base anywhere along a Vertical or Horizontal Mast, Pipe or Round Structural Member from 1-1/4 to 3 inches in Outside Diameter. Kit Comprised of Stainless Steel Mounting Plate and Hardware.

3 Star Inc 3MS100 Large Mast Tube Mount Bracket for Flat Base Mount Low Intensity Obstruction Light
3Starinc’s 3MU100 Large Mast Tube Mount for Flat Base Mount Low Intensity Obstruction Lights provides a means to Mount a Flat Style Obstruction Light Base anywhere along a Vertical or Horizontal Mast, Pipe or Round Structural Member from 2-1/4 to 4 inches in Outside Diameter. Kit Comprised of Stainless Steel Mounting Plate and Hardware.

IZZY WASH-38 1.65" Square Washer 3/8" Hole for 1-5/8" Wide Din Rail Strut Track
This 1-5/8" Square Washer is used to connect metal framing channel with 3/8" diameter Bolts compatible with 7/8" and 1-5/8" Din Rail Strut Track features Galvanized Finish.

IZZY GSN14 1/4" Threaded Hole Spring Nut used for metal framing and Mounting Attachments to 1-5/8" Square Channel Din Rail Strut Track features Galvanized Finish. Galvanized Spring Channel Nuts are one of the main components of a metal framing system. It is designed to provide essential gripping power and ease during installation.

IZZY GSN-38 3/8" Threaded Hole Spring Nut used for metal framing and Mounting Attachments to 1-5/8" Square Channel Din Rail Strut Track features Galvanized Finish. Galvanized Spring Channel Nuts are one of the main components of a metal framing system. It is designed to provide essential gripping power and ease during installation.

IZZY GSN-12 1/2" Threaded Hole Spring Nut used for metal framing and Mounting Attachments to 1-5/8" Square Channel Din Rail Strut Track features Galvanized Finish. Galvanized Spring Channel Nuts are one of the main components of a metal framing system. It is designed to provide essential gripping power and ease during installation.

3 Star Inc 3S-100D LED Based Low Intensity Obstruction Light for Communication Towers
3Starinc’s 3S100D LED Dual Low Intensity Obstruction Light series is a 100cd (candela) LED light designed for airway fixed obstacle marking application. It comply with ICAO & FAA regulation. It is integrated by 2 single lights. For making sure there is always a light working atop of the tower. Two optional working patterns can meet different area’s customers:
Service+Standby: Only one service light is working normally. It will auto-transfer to standby light in case of service light failure.
Service+Service: Two single lights work simultaneously. Either failure will not affect the other normal working.
Uses constant current LED driver IC, Compared with similar products, constant flow effect is good and the service life is longer.

Made tough, the 3S100D LED Low Intensity Obstruction Light LED Bulbs can be expected to run reliably for 100,000 hours, with little to no maintenance for the Housing with a 5 Year Warranty.

3 Star Inc 3S100 LED Based Low Intensity Obstruction Light for Communication Towers
3Starinc’s 3S100 LED Low Intensity Obstruction Light series is a 100cd (candela) LED light designed for airway fixed obstacle marking application. It complies with ICAO & FAA regulation. It shares the same mechanical design with YOL10, but comes with high power LED. Uses constant current LED driver IC, Compared with similar products, constant flow effect is good and the service life is longer.

Made tough, the 3S100 LED Low Intensity Obstruction Light LED Bulb can be expected to run reliably for 100,000 hours, with little to no maintenance for the Housing has a 5 Year Warranty.

PLP GC-65267 9/16" inch End Sleeve for use with Big-Grip Preformed Dead-end
The GC-65267 9/16" inch End Sleeve is for use on C-Coat Galvanized Steel BG-2116 Big-Grip Dead-ends to secure ends from Tampering or Unravelling due to Vibration and Ice buildup on 9/16" EHS Strand

3 Star 3SL32 Solar Charged Battery Powered LED Aviation LIOL for Communication Towers
The 3SL32 features a unique constant current design with ultra high efficiency. Being Solar Charged Battery Powered, Self-contained and Care-free, this light unit is easy to deploy and perfect in almost any Condition or Emergency use. Robust body construction and surface coating provides good protection against harsh environments while the high-efficiency rechargeable NiMH battery is capable of providing power for up to 20 days when the weather hampers solar charging.
This Online Version comes with a 32 Candela Effective Intensity Red Flash at 40 FPM rate and an External Master Power Switch with 70/100 Lux Sensing Automatic On/Off Light Activation Circuit.
GPS or 485 synchronization, Wireless Remote Control to customize Flash rate Frequency/Intensity and External Charging Features are Available (OPTION SPECIFIC ORDER).

BUYER IS RESPONSIBLE TO ASCERTAIN THAT PRODUCT MEETS SPECIFICATION REQUIREMENTS

Made tough, the 3SL32 LED Low Intensity Obstruction Light LED Bulb can be expected to run reliably for 100,000 hours, with little to no maintenance (solar panel cleaning may be required depending on environmental concerns). The Housing has a 5 Year Warranty and the NiMH Battery comes with a 2 Year warranty, providing proper charging and storage protocol is followed. A Replacement NiMH rechargeable battery can be sourced almost anywhere.

3 Star 3SL50 Solar Charged Battery Powered LED Aviation LIOL for Communication Towers
The 3SL50 features a unique constant current design with ultra high efficiency. Being Solar Charged Battery Powered, Self-contained and Care-free, this light unit is easy to deploy and perfect in almost any Condition or Emergency use. Robust body construction and surface coating provides good protection against harsh environments while the high-efficiency rechargeable NiMH battery is capable of providing power for up to 20 days when the weather hampers solar charging.
This Online Version comes with a 32 Candela Effective Intensity Red Flash at 40 FPM rate and an External Master Power Switch with 70/100 Lux Sensing Automatic On/Off Light Activation Circuit.
GPS or 485 synchronization, Wireless Remote Control to customize Flash rate Frequency/Intensity and External Charging Features are Available (OPTION SPECIFIC ORDER).

BUYER IS RESPONSIBLE TO ASCERTAIN THAT PRODUCT MEETS SPECIFICATION REQUIREMENTS

Made tough, the 3SL50 LED Low Intensity Obstruction Light LED Bulb can be expected to run reliably for 100,000 hours, with little to no maintenance (solar panel cleaning may be required depending on environmental concerns). The Housing has a 5 Year Warranty and the NiMH Battery comes with a 2 Year warranty, providing proper charging and storage protocol is followed. A Replacement NiMH rechargeable battery can be sourced almost anywhere.

3 Star Inc >CB04O Outdoor Controller for Low Intensity Obstruction Light System
3Starinc’s CB04O Outdoor Control Box for Low Intensity Obstruction Light Systems is an outdoor microprocessor controller device for monitoring and controlling obstruction lights, mostly for telecom, GSM, Microwave and TV towers. Connected with external photocell, the control panel will automatically turn the obstruction lighting system on/off from dusk to dawn. Even during the day time, the control panel is still in monitoring status. CB04O can be preprogrammed for different obstruction lighting configurations. Each branch has a maximum power output of 100W, this product features current detection and a common alarm relay output.

The CB04O has a user friendly LED monitoring display, Both NO and NC alarm contacts are available.

PLP GC-65270 7/8" inch End Sleeve for use with Big-Grip Preformed Dead-end
The GC-65270 7/8" inch End Sleeve is for use on C-Coat Galvanized Steel BG-1113 Big-Grip Dead-ends to secure ends from Tampering or Unravelling due to Vibration and Ice buildup on 7/8" EHS Strand

ROHN R-JR45A Replacement U Bolt for AS25G RP25G UHF25G
Factory OEM, Original Manufacturer's (1) U Bolt and (2) Nuts per Order as direct replacement for Accessory Rotor Shelf, Rotor Post or UHF Antenna Mount that is used for Mounting Antenna Rotor, Beacon Lights, Whip Antennas and other Attachments...

ROHN BRM425 Non-Penetrating Roof Antenna Mount 2.38 in. x 3 ft. Mast
Made in the USA!
Mast Dimensions - 2” STD. Pipe (2-3/8 O.D.) x 34 1/4”
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast.
This Item Ships LTL Freight ONLY.

ROHN AAGM40 Non-Penetrating VSAT Terminal Roof Dish Antenna Mount 4.00 x 54 in. Mast
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexagonal with a 16” tray to fit concrete blocks, typically used as ballast.
This Item Ships LTL Freight ONLY.

ROHN AAGM35 Non-Penetrating VSAT Terminal Roof Dish Antenna Mount 3.50 x 54 in. Mast
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 191" by 166" hexagonal with a 16” tray to fit concrete blocks, typically used as ballast.
This Item Ships LTL Freight ONLY.

ROHN VP0504555 50 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 50 foot in height. Does not include Harness or Wire Grab...

ROHN VP1004555 100 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 100 foot in height. Does not include Harness or Wire Grab...

ROHN VP1504555 150 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 150 foot in height. Does not include Harness or Wire Grab...

ROHN VP2004555 200 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 200 foot in height. Does not include Harness or Wire Grab...

ROHN VP2504555 250 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 250 foot in height. Does not include Harness or Wire Grab...

ROHN VP3004555 300 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 300 foot in height. Does not include Harness or Wire Grab...

ROHN VP3504555 350 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 350 foot in height. Does not include Harness or Wire Grab...

Holland Electronics GHS-2 2-Way Cable TV, Antenna and Broadband Internet 1GHz Coax Splitter
This GHS Series 1 GHz 2-way Splitter is State-of-the-art, designed and tested using the most current procedures assures success in hooking up Cable TV, TV Antenna, HDTV Sets, Broadband Internet modems and two way subscription Services.

ROHN 25G 10' foot Standard Main Tower Section for 25G Tower
Made in the USA!
This ROHN 25G 10' foot Tower Section is the main component of every 25G Series Guyed, Self-Supporting and Bracketed Tower Kit configuration. This section based on a 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with seven bays of continuous solid steel rod bracing and swaged, double-bolted connection joints which are proven to be the best method of joining tower sections for sturdiness and dependability.
Each 10 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 37 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item Ships LTL Freight ONLY!

3 Star Inc EZ 43-A 3-Way Down Guy Ring with Adjustable Collar for 1.25 inch Antenna Mast Pole
Made in the USA!
The EZ 43-A is an Adjustable Level Down Guy Ring for 3-Way guying of Antenna masts at any height along the 1-1/4" OD mast pole with Screw Eye Bolts to affix 620 guy wire. It can be used for supplementing or repairing existing installations or when configuring your own New Installation or Antenna Mast Extension.
(Mast and Guy Wire Not Included).

EZ-PNP  Non-penetrating Satellite Dish Pitched Roof Mount

Made in the USA!
is constructed of Pre-Galvanized Steel and uses standard concrete blocks with a 9 inch by 6 inch Foot Plate. This Particular Model can Accommodate a wider Range of Foot-Plates...

VMP TR-60 60 Inch Roof Mount Tripod for Antenna Mast
The VMP TR-60 Antenna Mast Roof Mount 60 Inch Tripod for TV Wireless Internet Starlink holds mast up to 2.00 inch O.D., includes a pitch pad kit, a universal mast clamp and has installer friendly front facing feet with outer legs lining up at 48 inches (3 x 16) and the center leg at 24 inches from either outer leg.

EZ 47-S1 Hex Head with Integral Washer Lag Screws
(4 count each Order)...

EZ 5-16 5' Foot Antenna Mast Pole Pre-galvanized 1.25" inch Diameter 16 AWG Pipe
Made in the USA!
This 5 ft Antenna Mast Pole for Medium to Heavy Duty Outdoor Antenna mounting, made of a 1-1/4 inch pre-galvanized 16 gauge Pipe. Standard not only for TV and Radio reception, but Cellular Phone and Date Gateway repeaters, WISP, Wireless Internet, Telemetry, CB, HAM and more!
Manufacturers recommend that mast heights of 10 feet and higher be guyed.
(Mount Not Included)

PCT NGNII-2S 2-Way Cable TV, Antenna and Broadband Internet 1GHz Coax Splitter
Use the Same 2-way splitter your Cable TV Company uses, like this Genesys II Series 1 GHz 2-way Indoor / Outdoor CATV Coaxial Drop Cable Splitter that offers exceptional performance and long-term reliability for 2nd TV installations.

Holland Electronics DCG2-30 30 dB Directional Wallplate Coupler 2 Port Drop Tap for Coaxial Cable TV Antenna 5-1000 MHz
This DCG2-30 is a 30 dB Directional Wallplate Coupler with a 2 Output Port Drop Tap for Coaxial Cable TV Antenna passing 5-1000 MHz for Loop-run Coaxial Cable Video Distribution Systems feeding from one unit and/or Floor to another in series cascade. Provides Floor, Unit and Room Signal for Cable TV, Off-air Antenna TV, MATV, SMATV, Broadband Internet and Pay-Per-View Services in Hotels, Motels, Apartment Complexes, Condominiums, Strip Mall Units and Business Parks. The DCG line of high quality directional couplers have been developed for indoor or outdoor applications requiring high isolation.

ROHN 2590FM 25G Tower 90 Degree Section for Theater Stage Lighting Audio Video Truss Tower
Made in the USA!
The ROHN 2590 Female to Male is one of three 90 Degree Joining Sections used in combination with 3', 5', 7' and 10 foot 25G Main Tower Sections and Base Plates to construct a Theater or Outdoor Stage Lighting and Audio/Video Truss Tower.

ROHN 2590FF 90 Degree 25G Tower Section for Outdoor Theater Lighting and Audio
Made in the USA!
The ROHN 2590 Female to Female is one of three Section Joining Accessories that allows for 90 degree joint connection of standard ROHN 25G 10 foot Tower Sections.

ROHN BPL25G Thrust Bearing Plate and Down Guy Top Cap for 25G Tower
Made in the USA!
The ROHN BPL25G Thrust Bearing Top Cap Plate bolts onto the top of any Standard ROHN 25G Main Tower section of 10, 7, 5 or 3 foot in height and with long legs, can provide extra clearance for installation of equipment such as Rotors on an Accessory Shelf mounted on a section below. The BPL25G is pre-drilled to accept mounting for the ROHN Thrust Bearing TB3 or TB4 and also provides Down Guy Attachment to this very same plate via Shackles and Thimbles.(Not Included)

ROHN EB2525G Roof Eave Bracket Mount with Adjustable Pitch Connection for 25G Tower
Made in the USA!
The ROHN EB2525G is a Roof and roof Eave Bracket that has an adjustable Hinged connection that allows the Tower leg clamps to remain perpendicular providing Greater Support for ROHN 25G guyed and non-guyed Tower Installations.

ROHN TB3 2" inch Heavy Duty Thrust Bearing for 25G 45G 55G Series Towers
Made in the USA!
The ROHN TB3 Thrust Bearing is pre-drilled to mount onto ROHN G-Series Tower Top Cap Sections and Plates like the 25AG4, BPL25G, BAS25G, 45AG4, BPL45G and BPL55G that are in turn, pre-drilled to accept the TB3 in support of up to 2.00" OD Mast. The TB3 is not intended to be mounted onto AS25G or AS455G Accessory shelves. The Rotor can then be Mounted on these Accessory Shelves Below.

ROHN TB50 Bushing fits 20BG 25AG 45AG Top Cap Section for 1.25" OD Antenna Mast
Made in the USA!
The ROHN TB50 Die Cast Mast Tube Reducer Bushing fits 20BG 25AG 45AG Top Cap Sections for installing a 1.25" OD Antenna Mast in the Mast Tube of these Sections. The 20BG and 25AG Top Cap Sections come with a (1) Removable 1.25" ID Bushing at the Top end of the Mast Tube on the Pinnacle of the Section that can knocked out as only a couple tack welds hold it in place. The TB50 can be used as a replacement for this end as well as providing the bushing necessary at the bottom end to center the 1.25" Antenna Mast you are looking to install. The 45AG Mounting Tube is open at both ends.

ROHN SA253UA Side Arm Antenna Mount Assembly for 45G 45GSR 55G 65G Series Towers
Made in the USA!
This is a (2) Rail Single Side Arm Mount for lightweight broadband, scada and two-way antennas, mounting on 25G, 45G, 45GSR, 55G and 65G towers. Extends 3' feet off the Tower with 2.25" inch OD Pipe Antenna Mounting Tube that is 3" feet long before mounting.

ROHN RP25G Single Rotor Post 1.25"OD for Small Antenna on 25G Series Tower
Made in the USA!
The ROHN RP25G is for Mounting Antenna Rotors onto a 1.25 DIA x 7.5inch post. Fastens with Saddle Clamps to the Tower leg (also 1.25 inch DIA), with 4.75 inches of clear space between Tower Rail mount and Rotor Post.

ROHN WM4 Antenna Wall Mount 4 inch W Style Brackets for 1.25 to 2.75 inch OD Mast
Made in the USA!
The ROHN WM4 is a Hot Dip Galvanized 14 Gauge Steel Bracket Set of (2) Heavy Duty "W" Style Brackets with Anti-Twist Feature and Hardware Included for a 4 inch Standoff Wall Support of Light and Medium Duty Antennas on Mast Poles from 5 to 10 feet long and from 1.25 to 2.75 inches in Outside Diameter including Telescopic Antenna Mast Poles for Off-air and OTA TV, UHF/VHF Radio, Remote Telemetry Control and Monitoring Stations, Cellular Date Gateways, WiFi, Wireless Internet, Receivers, Boosters and Repeaters.(Mast Not Included)

ROHN 25RG 10' foot Tapered Base #10470 Post Insulated Section for 25G Guyed Tower
Made in the USA!
The ROHN 25RG is one of the (3) versions of Tapered Base Sections for the 25G Guyed Tower Series. This particular version is a 10' Foot Tapered Section includes (3) #10470 post insulators built into this Section for the 3/4X12PP (Pier Pin, sold separately) Base Mounting of the ROHN 25G Guyed Tower Series in Radio Applications
This Item Ships LTL Freight ONLY!

ROHN 25TG 10' foot Tapered Section for Pier Pin Base Mount of 25G Guyed Tower
Made in the USA!
The ROHN 25TG is one of the (3) versions of Tapered Base Sections for the 25G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for the 3/4X12PP (Pier Pin, sold separately) Base Mounting of the ROHN 25G Guyed Tower Series atop the appropriate concrete Pad. See the ROHN 25G Guyed Tower Catalog for Poured Concrete Pad Specifications
This Item Ships LTL Freight ONLY!

ROHN 25TGIA 10' foot Tapered Section for A-4197-L Base Insulator Mount of 25G Guyed Tower
Made in the USA!
The ROHN 25TGIA is one of the (3) versions of Tapered Base Sections for the 25G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for A-4197-L Base Insulator Mount in Broadcast Radio Applications of the ROHN 25G Guyed Tower Series and is Designed to base onto the Austin Base Insulators/Lightning Arrestors for Guyed Radio Towers TYPE A-4197-L (not included) or 3/4X12PP (Pier Pin, sold separately).
This Item Ships LTL Freight ONLY!

ROHN 2590MM 90 Degree 25G Tower Section for Outdoor Theater Lighting and Audio
Made in the USA!
The ROHN 2590 Male to Male is one of three Section Joining Accessories that allows for 90 degree joint connection of standard ROHN 25G 10 foot Tower Sections.

ROHN RP25G CM Double Rotor Post 1.25"OD for Antenna Array on 25G Series Tower
Made in the USA!
The ROHN RP25GCM Antenna Rotor Post is Galvanized Steel T-tube Post with (2) U-bolts to attach to any Side Rail anywhere on a 25G Tower Section for Mounting a Special CM Attachment Style Light Duty Antenna Rotor or Array onto the Post. Fastens with Saddle Clamps.

ROHN SR245 Safety Ring Attachment for 25G 45G 45GSR Tower Installation or Service
Made in the USA!
The SR245 Snaps into place at any level with No bolts required. This attachment fits the ROHN 25G, 45G, 45GSR Tower Series and Compliments the Work Platform Accessory (WP25G for 25G and WP45G for the 45G, Not included). These Accessories, along with your safety harness, provides a Safe Work Space Environment at any Tower Height.

ROHN WP25G Work Platform Attachment for 25G 45G 45GSR Tower Installation or Service
Made in the USA!
The WP25G Snaps into place at any Tower level with No bolts required. This attachment fits the ROHN 25G Tower Series and Compliments the Safety Ring Accessory (SR245 Not included). These Accessories, along with your Safety Harness, provides a Safe Work Space Environment at any Tower Height.

ROHN ACL25G Anti-Climb Panels Safety Accessory for 25G Tower Section
Made in the USA!
These ROHN ACL25G Anti-Climb Panel Kit consists of (3) Panels with associated Hardware are Installed for Protection and Public Safety on each Face of the Bottom 25G Tower Section. Search for the ACL models for the other ROHN Tower Series. Together with ACWS Anti-Climb Warning Sign and appropriate fencing, these panels help protect your Tower from Unauthorized Climbing Activities
This Item Ships LTL Freight ONLY!

ROHN 25G7 7' foot Short Main 25G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 25G7 is a 7 foot 25G Short Main Tower Section that can be used in ALL 25G Tower Series configurations. It is based upon the same 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 25G 10' foot Main Tower Section but comes in at less than 108 inches in length.
Each 7 foot Tower Section Hot Dip Galvanized and is shipped containing all required nuts and bolts inside one leg and weighs about 27 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 25G130R100 100' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R100 100' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R100 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 100 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G130R090 90' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R090 90' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R090 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 90 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G130R080 80' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R080 80' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R080 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 80 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G130R070 70' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R070 70' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R070 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 70 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G130R060 60' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R060 60' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R060 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 60 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G130R050 50' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R050 50' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R050 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 50 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G130R040 40' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
Made in the USA!
The ROHN 25G130R040 40' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R040 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 40 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R190 190' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R190 190' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R190 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 190 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R180 180' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R180 180' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R180 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 180 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R170 170' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R170 170' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R170 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 170 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R160 160' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R160 160' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R160 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 160 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R150 150' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R150 150' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R150 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 150 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R140 140' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R140 140' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R140 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 140 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R130 130' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R130 130' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R130 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 130 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R120 120' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R120 120' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R120 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 120 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R110 110' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R110 110' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R110 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 110 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R100 100' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R100 100' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R100 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 100 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R090 90' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R090 90' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R090 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 90 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R080 80' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R080 80' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R080 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 80 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R070 70' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R070 70' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R070 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 70 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R060 60' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R060 60' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R060 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 60 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R050 50' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R050 50' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R050 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 50 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 25G110R040 40' foot 25G Guyed Tower Complete 110/90 MPH Rated Kit
Made in the USA!
The ROHN 25G110R040 40' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G110R040 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 40 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.

ROHN 45G 10' foot Standard Main Tower Section for 45G Tower
Made in the USA!
This ROHN 45G 10' foot Tower Section is the main component of every 45G Series Guyed, Self-Supporting and Bracketed Tower Kit configuration. This section based on a 16-3/4" inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 14 gauge wall side rails with seven bays of continuous solid steel rod bracing and swaged, double-bolted connection joints which are proven to be the best method of joining tower sections for sturdiness and dependability.
Each 10 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 80 lbs. The 45G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item Ships LTL Freight ONLY!

ROHN 45GSR10 10' Foot Solid Rail 45GSR Main Tower Section
Made in the USA!
The ROHN 45GSR10 is the 10' Foot 45GSR Main Tower Section made with a 1-1/4" OD Solid Steel Rail design for Heavy Duty applications. A guyed 45GSR Tower can withstand 130 MPH Wind Loads up to 340 feet in Height.
This Item Ships LTL Freight ONLY.

ROHN 45GSR20 20' Foot Solid Rail 45GSR Main Tower Section
Made in the USA!
The ROHN 45GSR20 is the 20' Foot 45GSR Main Tower Section made with a 1-1/4" OD Solid Steel Rail design for Heavy Duty applications. A guyed 45GSR Tower can withstand 130 MPH Wind Loads up to 340 feet in Height.
This Item Ships LTL Freight ONLY.

ROHN 45TGIA 10' foot Tapered Section for A-4197-L Base Insulator Mount of 45G Guyed Tower
Made in the USA!
The ROHN 45TGIA is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for A-4197-L Base Insulator Mount in Broadcast Radio Applications of the ROHN 45G Guyed Tower Series and is Designed to base onto the Austin Base Insulators/Lightning Arrestors for Guyed Radio Towers TYPE A-4197-L (not included) or 3/4X12PP (Pier Pin, sold separately).
This Item Ships LTL Freight ONLY!

ROHN 45TG 10' foot Tapered Section for Pier Pin Base Mount of 45G Guyed Tower
Made in the USA!
The ROHN 45TG is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for the 3/4X12PP (Pier Pin, sold separately) Base Mounting of the ROHN 45G Guyed Tower Series atop the appropriate concrete Pad. See the ROHN 45G Guyed Tower Catalog for Poured Concrete Pad Specifications.
This Item Ships LTL Freight ONLY!

ROHN 5545G 20' foot 55G to 45G Transition Joining Adapter Tower Section
The ROHN 5545G 20' foot 55G to 45G Transition Adapter Tower Section provides a means to join the 45G 16-3/4" Equilateral Face, 14 Gauge, 1-1/4" inch Rail Main Tower Section onto and on top of a 55G 17" Equilateral Face, 11 Gauge, 1-1/2" inch Rail Main Tower Section. This would be used in cases of Custom Engineering in increasing the Load Capacity of a 45G using a 55G Base in Self-Supporting and Guyed Installations
This Item is OVERSIZED and Ships Dedicated Freight ONLY!

ROHN 45TGIA47 10' foot Tapered Section for A-4722-B Base Insulator Mount of 45G Guyed Tower
Made in the USA!
The ROHN 45TGIA47 is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for A-4722-B Base Insulator Mount in Broadcast Radio Applications of the ROHN 45G Guyed Tower Series and is Designed to base onto the Austin Base Insulators/Lightning Arrestors for Guyed Radio Towers TYPE A-4722-B (not included) or 3/4X12PP (Pier Pin, sold separately).
This Item Ships LTL Freight ONLY!

ROHN 45RG 10' foot Tapered Base #10470 Post Insulated Section for 45G Guyed Tower
Made in the USA!
The ROHN 45RG is one of the (4) versions of Tapered Base Sections for the 45G Guyed Tower Series. This particular version features 14 gauge walls with seven bays of bracing and swaged, double-bolted connections in a 10' Foot Tapered Section that includes (3) #10470 post insulators built into the rails of this section for use as a Base Mount of the ROHN 45G Guyed Tower Series in Radio Applications.
This Item Ships LTL Freight ONLY!

ROHN BPL45G Thrust Bearing Plate and Down Guy Top Cap for 45G Tower
Made in the USA!
The ROHN BPL45G Thrust Bearing Top Cap Plate bolts onto the top of any Standard ROHN 45G Main Tower section and can provide extra clearance for installation of equipment such as Rotors on an Accessory Shelf mounted on a section below. The BPL45G is pre-drilled to accept mounting for the ROHN Thrust Bearing TB3 or TB4 and also provides Down Guy Attachment to this very same plate via Shackles and Thimbles.(Not Included)

VMP PRM-2 Non-penetrating Satellite Dish Pitched Roof Mount
is constructed of Gray Powder Coat Steel and uses standard concrete blocks to anchor with a 6 inch by 9 inch Foot Plate. Larger Plate Dimension than the PRM-1, and accomodates the DirecTV SlimLine Dish Package (Not Included)...

3 Star 3S-FRMMAT Protective Rubber Mat for FRM Non-Pen Roof Mount 42"L x 36"W x 3/32" Thick
This FRMMAT provides a Protective Layer to lay down between the Roof Surface and the Non-Penetrating Roof Antenna Mount Frame before Installation. The 3/32 Thick Mat covers a 36" inch Wide by 42" inch Long area of Roof Protection, trims neatly and provides a Non-slip surface for the Non-Penetrating Mount.

ROHN TB4 3" inch Heavy Duty Thrust Bearing for 25G 45G 55G Series Towers
Made in the USA!
The ROHN TB4 Thrust Bearing is pre-drilled to mount onto ROHN G-Series Tower Top Cap Sections and Plates like the 25AG4, BPL25G, BAS25G, 45AG4, BPL45G and BPL55G that are in turn, pre-drilled to accept the TB4 in support of up to 3.00" OD Mast. The TB4 is not intended to be mounted onto AS25G or AS455G Accessory shelves. The Rotor can then be Mounted on these Accessory Shelves Below.

ROHN ACL455 Anti-Climb Panels Safety Accessory for 45G 55G Tower Section
Made in the USA!
These ROHN ACL455 Anti-Climb Panel Kit consists of (3) Panels with associated Hardware are Installed for Protection and Public Safety on each Face of the Bottom 45G or 55G Tower Section. Search for the ACL models for the other ROHN Tower Series. Together with ACWS Anti-Climb Warning Sign and appropriate fencing, these panels help protect your Tower from Unauthorized Climbing Activities
This Item Ships LTL Freight ONLY!

ROHN TB45D Torque Bar Stabilizer Accessory for GA45GD Guy Bracket Assembly
Made in the USA!
This is (1) Bar per Order, needing (3) in total to complete a 3-way down guy configuration. This Accessory Modifies a New or Existing GA45GD Down Guy Bracket Assembly (Not included) into a Torque Stabilizer Assembly that would be installed at existing Guy attachments on any horizontal brace as opposed to tower section joints as provided for by the TA45 (Not included) Stabilizer Assembly which would require additional Down Guy Attachments. This Item will also require the purchase of 3/8" inch shackles to complete the upgrade.

ROHN WP45G Work Platform Attachment for 45G 45GSR Tower Service & Installation Work
Made in the USA!
The WP45G Snaps into place at any Tower level with No bolts required. This attachment fits the ROHN 45G, 45GSR Tower Series and Compliments the Safety Ring Accessory (SR245 Not included). These Accessories, along with your Safety Harness, provides a Safe Work Space Environment at any Tower Height.

3 Star Inc 3/8S-CP 3/8" inch Round Pin Anchor Shackle Hot Dip Galvanized
These 3/8" inch Round Pin shackles can be specified for use with the Some of the 25G, 45G, 45GSR, 55G, 65G and 80/90 Torque Arm Stabilizer Assemblies, Down Guy Anchor Head Equalizer Plates and Other Torque Bar Stabilizer Assembly Options incorporated into GA25GD, GA45GD and GA55GD Guy Bracket Assemblies (use one for each Torque Bar, three each for a complete level).

ROHN 45G Complete 150 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 140 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 130 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 120 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 110 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 100 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 90 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 80 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...

ROHN 45G Complete 70 Foot 130/110 MPH (REV. G/F) Guyed Tower
with Tower Sections, Guys, Anchors and Grounding, less Foundation and Installation...