ROHN 25G 10' foot Standard Main Tower Section for 25G Tower
Made in the USA!
This ROHN 25G 10' foot Tower Section is the main component of every 25G Series Guyed, Self-Supporting and Bracketed Tower Kit configuration. This section based on a 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with seven bays of continuous solid steel rod bracing and swaged, double-bolted connection joints which are proven to be the best method of joining tower sections for sturdiness and dependability.
Each 10 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 37 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item Ships LTL Freight ONLY!

ROHN 2590FM 25G Tower 90 Degree Section for Theater Stage Lighting Audio Video Truss Tower
Made in the USA!
The ROHN 2590 Female to Male is one of three 90 Degree Joining Sections used in combination with 3', 5', 7' and 10 foot 25G Main Tower Sections and Base Plates to construct a Theater or Outdoor Stage Lighting and Audio/Video Truss Tower.

ROHN 2590FF 90 Degree 25G Tower Section for Outdoor Theater Lighting and Audio
Made in the USA!
The ROHN 2590 Female to Female is one of three Section Joining Accessories that allows for 90 degree joint connection of standard ROHN 25G 10 foot Tower Sections.

ROHN 25RG 10' foot Tapered Base #10470 Post Insulated Section for 25G Guyed Tower
Made in the USA!
The ROHN 25RG is one of the (3) versions of Tapered Base Sections for the 25G Guyed Tower Series. This particular version is a 10' Foot Tapered Section includes (3) #10470 post insulators built into this Section for the 3/4X12PP (Pier Pin, sold separately) Base Mounting of the ROHN 25G Guyed Tower Series in Radio Applications
This Item Ships LTL Freight ONLY!

ROHN 25TG 10' foot Tapered Section for Pier Pin Base Mount of 25G Guyed Tower
Made in the USA!
The ROHN 25TG is one of the (3) versions of Tapered Base Sections for the 25G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for the 3/4X12PP (Pier Pin, sold separately) Base Mounting of the ROHN 25G Guyed Tower Series atop the appropriate concrete Pad. See the ROHN 25G Guyed Tower Catalog for Poured Concrete Pad Specifications
This Item Ships LTL Freight ONLY!

ROHN 25TGIA 10' foot Tapered Section for A-4197-L Base Insulator Mount of 25G Guyed Tower
Made in the USA!
The ROHN 25TGIA is one of the (3) versions of Tapered Base Sections for the 25G Guyed Tower Series. This particular version is a 10' Foot Tapered Section for A-4197-L Base Insulator Mount in Broadcast Radio Applications of the ROHN 25G Guyed Tower Series and is Designed to base onto the Austin Base Insulators/Lightning Arrestors for Guyed Radio Towers TYPE A-4197-L (not included) or 3/4X12PP (Pier Pin, sold separately).
This Item Ships LTL Freight ONLY!

ROHN 2590MM 90 Degree 25G Tower Section for Outdoor Theater Lighting and Audio
Made in the USA!
The ROHN 2590 Male to Male is one of three Section Joining Accessories that allows for 90 degree joint connection of standard ROHN 25G 10 foot Tower Sections.

ROHN 25G7 7' foot Short Main 25G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 25G7 is a 7 foot 25G Short Main Tower Section that can be used in ALL 25G Tower Series configurations. It is based upon the same 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 25G 10' foot Main Tower Section but comes in at less than 108 inches in length.
Each 7 foot Tower Section Hot Dip Galvanized and is shipped containing all required nuts and bolts inside one leg and weighs about 27 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 25G5 5' foot Short Main 25G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 25G5 is a 5 foot 25G Short Main Tower Section that can be used in ALL 25G Tower Series configurations. It is based upon the same 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 25G 10' foot Main Tower Section but comes in at less than 96 inches in length.
Each 5 foot Tower Section is Hot Dip Galvanized and shipped containing all required nuts and bolts inside one leg and weighs about 19 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 25G3 3' foot Short Main 25G Tower Section can Ship UPS Package
Made in the USA!
This ROHN 25G3 is a 3 foot 25G Short Main Tower Section that can be used in ALL 25G Tower Series configurations. It is based upon the same 12-1/2 inch equilateral triangular design, constructed of extra heavy duty 1-1/4 inch steel 16 gauge wall side rails with continuous solid steel rod bracing and swaged, double-bolted connection joints just like the 25G 10' foot Main Tower Section but comes in at less than 40 inches in length.
Each 3 foot Tower Section Hot Dip Galvanized and is shipped containing all required nuts and bolts inside one leg and weighs about 14 lbs. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications delineated in every ROHN Tower Catalog Kit.
This Item can Ship UPS Package!

ROHN 25AG Top Cap Section with 2.00" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG Top Cap Pinnacle Section is 9'-0" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.00" OD Mast Tube protruding 8.25 inches above apex of side rails at the Pinnacle of this Section. A 2.00 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 1-13/16 inch Inside Diameter. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 20BG 3' foot 25G Short Top Cap Section with 2.00" OD Mast Tube can Ship UPS Package
This ROHN 20BG Short Top Cap Section for a 25G Tower is 37 inches high and consists of 16 gauge walls with a 2.00" OD Mast Tube protruding 8.25 inches above apex of side rails at the Pinnacle of this Section. A 2.00 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 1 and 13/16 inch Inside Diameter.
This Item can Ship UPS Package!

ROHN 25AG Top Cap Section with 2.00" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG Top Cap Pinnacle Section is 9'-0" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.00" OD Mast Tube protruding 8.25 inches above apex of side rails at the Pinnacle of this Section. A 2.00 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 1-13/16 inch Inside Diameter. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG3 Top Cap Section with 2.25" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG3 Top Cap Pinnacle Section is 9'-3.5" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.25" OD Mast Tube protruding 12 inches above apex of side rails at the Pinnacle of this Section with (2) set screw lugs with screws shipped inside one leg. A 2.25 inch Outside Diameter 14 gauge Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 2 and 1/16-3/32 inch Inside Diameter. For those interested in seating a 2.00" OD mast tube within, be prepared to flatten any HDG burring by bore honing. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG4 Top Cap Section with Thrust Bearing Plate for 25G Tower
Made in the USA!
The ROHN 25AG4 Flat Top Cap Section is 8'-3/16" in height, featuring a Top Plate pre-drilled for the ROHN TB-3 Thrust Bearing, 16 gauge walls with 5 bays of bracing and swaged double-bolted connections. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN SB25G 3' foot - 4" inch Short Base Section for 25G Guyed Tower Installation
Made in the USA!
The ROHN SB25G is a 3 foot-4 inch Short Base Section for Embedment in a poured Concrete Pad prior to erection of a 25G Guyed Tower. This Short Base Section is set into a hole, with concrete poured around it and resting on top of gravel layer underneath to provide a Drained, Bolted and Fixed Connection to a 25G Main Tower or Top Cap Section which provide addition twist control than using a typical BPC25G Base Plate that centers over a Pier Pin Rod and rests on top of a previously poured Concrete Pad.
If you are installing a "Bracketed" or "Self-Supporting" 25G Series Tower, please refer to the ROHN SB25G5 5 foot Short Base as this part is called out for in the ROHN Pre-Engineered Kits.

ROHN SB25G5 5' foot Short Base Section for 25G Self-Supporting or Bracketed Tower
Made in the USA!
The ROHN SB25G5 is a 5 foot Short Base Section for Embedment in a poured Concrete Pad prior to erection of a 25G Bracketed or Self-Supporting Tower. This Short Base Section is set into a hole, with concrete poured around it and resting on top of gravel layer underneath to provide a Drained, Bolted and Fixed Connection to a 25G Main Tower or Top Cap Section which provide addition twist control.
If you are installing a Guyed 25G Series Tower, this ROHN SB25G5 5 foot Short Base can be used with a slightly deeper poured concrete pad in substitution of the ROHN SB25G 3 foot-4 inch Short Base called out for in the ROHN Pre-Engineered Guyed Tower Kits.

ROHN SBH25G 3'-9" Hinged Short Base Section for 25G Guyed or Bracketed Tower
Made in the USA!
The ROHN SBH25G is a Hinged 3 foot-9 inch Short Base Section for Embedment in a poured Concrete Pad prior to erection of a 25G Guyed or Bracketed Tower. This Short Base Section is set into a hole, with concrete poured around it and resting on top of gravel layer underneath to provide a Drained, Bolted and Fixed Connection to a 25G Main Tower or Top Cap Section. Be sure to orient the Base properly so that you can Bracket or Down Guy the Tower as Designed and still able to tilt the Tower Down away from Obstructions
This Hinged 25G Short Base Tower Section CANNOT be used in ANY "Self-Supporting" 25G Series Tower configuration, please refer to the ROHN SB25G5 5 foot Short Base as this part is called out for in the ROHN Pre-Engineered Self-Supporting Tower Kits.

ROHN SBH25GHDW Repair/Replacement Hinge Kit for SBH25G Hinged Base Section
Made in the USA!
The ROHN SBH25GHDW is a Primarily a Repair/Replacement Kit to Fix a Worn or Damaged SBH25G Hinged Short Base Section. It contains all the parts needed to replace the Hinged Rail Posts, Bolts and Nuts to make it like Brand New. Check the corresponding Base Section Holes for cracks or deformities that may render your base irreparable as to avoid further Damage or Injury.
The Buyer/Installer/User Assume ALL Liability in Craftsmanship and Appropriate Use!

ROHN 25AG1 Top Cap Section with 1.25" NPT Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG1 Top Cap Pinnacle Section is 9'-3" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 1.25" NPT, 14 gauge Mast Tube protruding 12 inches above apex of side rails at the Pinnacle of this Section. A 1.25" NPT translates to a 1.25" ID with a 1.66" OD threaded Mast Tube at the Pinnacle of the ROHN Top Cap Section that can then be used for DBS Satellite Dish Antenna mounting as well as adaptations using various other 1-1/4" NPT threaded Pipes, Flanges, Bases, etc. for Extensions, Mounting, Lighting, Cameras and Housed Transceivers.br /> Some Users will affix 1.25" OD Mast Poles inside the NPT Pipe and field drill their own Set Screws for a 1.25" Mast Extension. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG2 Top Cap Section with 2.25" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG2 Top Cap Pinnacle Section is 9'-9" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.25" OD Mast Tube protruding 18 inches (of 36" total tube length) above apex of side rails at the Pinnacle of this Section. A 2.25 inch Outside Diameter 14 gauge Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 2 and 1/16-3/32 inch Inside Diameter. For those interested in seating a 2.00" OD mast tube within, be prepared to flatten any HDG burring by bore honing. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!

ROHN 25AG5 Top Cap Section with 2.75" OD Mast Tube for 25G Tower
Made in the USA!
The ROHN 25AG5 Top Cap Pinnacle Section is 8'-3.5" in height, consists of 16 gauge walls with 5 bays of bracing, swaged double-bolted connections and a 2.75" OD Mast Tube protruding 0.00" inches above apex of side rails at the Pinnacle of this Section. The Mast Tube comes with (2) set screw lugs in place with the screws shipped inside one leg. A 2.75 inch Outside Diameter Mast Tube at the Pinnacle of the ROHN Top Cap Section means approx. 2.584" inch Inside Diameter. For those interested in seating a 2.50" inch OD mast tube within, be prepared to flatten any HDG burring by bore honing. Each 25G Tower Section is Hot Dip Galvanized is shipped containing all required nuts and bolts inside one leg.
This Item Ships LTL Freight ONLY!