|
|
(1 Unit) NIPPON NF-3 F Female to BNC Female Transition Adapter is of an anti-corrosive finish, Commercial Grade and Quality with Silver Plate Center Conductor. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. The F connector is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable.
Spec. Sheet
Availability: Ships out in 24 hours!
Shipping: Can ship anywhere!
Weight: 0.02 lb
|
|
An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.
|
|
|
|
Your shopping cart is empty... Let's Fill 'er up!
|
|
Contact Us with Your Installation Questions or Sales Inquiries !
*Just Click one below!*
|
|
|
|
Click on Logos for Verification and more Information !
|
|
|
Click on Logos for Verification and more Information !
|
|
|

ROHN 25G Towers
ROHN Telescopic Masts
