Monday - Friday 8:00 - 5:00 PM EST | Call 804-550-7202
Printer Friendly Tell a Friend

ROHN 25G Adjustable House Bracket HB25BG 0-24"

Hot Dip Galvanized
Bolted Joints
Rail Clamps included
Can be used in:
Bracketed Config.s
Manufacturer CodeHB25BG
Stock Level: 0
AvailabilityShips out in 2 -3 days!
ShippingCan ship anywhere
ROHN HB25BG 24 inch Adjustable House Bracket
for Standoff from House Wall up to 24 inches. This ROHN Tower HB25BG House and wall bracket offers greater support for ROHN Guyed, Bracketed and Self Supporting 25G Tower installations and is adjustable up to 24 inches. Comes with Adjustment Bolts and Rail Clamps. The ROHN 25G tower can be in used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN 25G catalog. Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.

spec. sheet

Spec. Sheet

Get Adobe Reader

ROHN Produces this series of Brackets specifically for the 25G Tower in exterior wall mount applications. Sturdy and Adjustable, this galvanized American Steel bracket is no comparison to the ROHN Clone brackets you may find at other Sites. Buy ROHN, Buy American.
ROHN HBHDW Replacement Clamp Set for 25G House Bracket - $19.99
ROHN R-HBHDW Replacement Clamp Set for 25G House Bracket
Factory OEM, Original Manufacturer's (2) U Bolt, (4) Nuts, (4) Washers, (4) Saddles, (2) Adjustment Bolts, (2) Lock Washers and (2) Nuts per Order as direct replacement parts for HB25AG, HB25BG, HB25CG and EB2525G...

Product isn't rated yet. Write a review.

ROHN 25G Towers
ROHN 25G Towers, Sections, Parts and Accessories

Tower and foundation installations should be performed by qualified and experienced personnel using construction drawings. This document is to serve as a guide for sizing and buying the 25G tower. All types of antenna installations should be thoroughly inspected by qualified personnel and re-marked with appropriate danger and anti-climb labels at least twice a year to ensure safety and proper performance.

Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a susbstitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase. All Information regarding the ROHN 25G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.

ROHN Complete Tower ID Nomenclature

Tower designs are in accordance with ANSI/TIA-222-F-1996 and ANSI/TIA-222-G-2005, Class I Structures.
2. Design assumes towers are installed on level ground. Lower EPA values will apply for roof mounted towers or for sites located on unusual terrain.
3. Designs assume two 1/2" diameter lines on each tower face.
4. Anchor radius is from tower base to intersection of anchor rod with ground.
5. Tower designs and guy chord lengths shown are based on level ground. Initial tensions for guys in pounds at 60º Fahrenheit are shown in ( ).
6. Antenna and mounts are assumed symmetrically placed at the tower top.

Items listed are required for complete (ground) guyed towers. Base and anchor details will be required for installation on roofs or for sites located on unusual terrains and wind loading criteria, for all roof type installations.
2. Standard guys provided with each standard tower include an additional 6% length.
3. Anchor grounding (AGK1GGX) and base grounding (BGK3GGX) are included with the tower material.
4. Installation information and a safety package (P/N: ACWS) are included with each tower.

ROHN 25G Buyers Guide

ROHN 25G Buyers Guide

Get Adobe Reader

This Buyers Guide will answer many questions you may have on this Product Line. For more detailed information and Specification Sheets covering many aspects of Various Parts, Accessories and Installation Scenarios... Please refer to the "ROHN 25G Tower" Link appearing in the Footer of this Page Below!

ROHN Tower series is the Workhorse of America's Large and Small Communications needs; from Governments, Institutions, Space Program, Olympics, TV AM FM Broadcast, Terrestrial Microwave to Business-Band Radio, HAM Radio Operators, to Off-Air Antenna TV and DTV Reception in Fringe areas outside the Surburban Broadcast Area. ROHN fabricates their towers from the highest quality steel. They maintain mill certification on the raw materials they receive to verify the material composition of each structural member. With a focus on quality, their fabrication facility has been awarded Certification by the American Institute of Steel Construction and the Canadian Welding Bureau. They have also been approved by the City of Los Angeles, CA and Clark County, NV as a certified fabricator. They are confident that their facility and staff can produce superior grade towers and poles that will meet your standards and weather the test of time. ROHN Towers, Accessories and their Construction/Assembly Assistance are also available via Call 877-660-0974 at anytime for assistance.



a) The intended purpose of these guidelines is to assist the customer and/or owner to retain the services of a Geotechnical Engineer.

b) It is not ROHN´s purpose or intent to supercede the Geotechnical Engineer´s knowledge, judgement and/or experience. It is the Geotechnical Engineer´s responsibility to add or delete from these items, based on local site conditions and other factors.

c) Additional information is provided in ANSI/TIA-222-G Annex G "Geotechnical Investigations".


a) ROHN will not accept any liability, either expressed or implied, for the use of, and omissions in, these guidelines.


a) Borings should be taken at tower legs for self-supporting towers and at the base and anchor points for guyed towers. For small self-supporting towers, two borings may suffice. For large self-supporting towers, one boring should be taken at each tower leg. A "small" self-supporting tower is assumed to have a face width less than 20 feet and a compression load less than 50 kips per leg. For pole structures, one boring may suffice.

b) The minimum boring depth should be 30 feet for pole structures, self-supporting towers and guyed tower bases. For guyed tower anchors, the minimum depth should be 15 feet. The actual depth of boring must be determined by the Geotechnical Engineer based on reactions, soil conditions and the type of foundation recommended.

c) If borings cannot be advanced to the desired depth, rock corings should be taken. Rock Quality Designation (RQD) values and compressive strengths should be determined.


a) The following properties, for each soil layer encountered, should be determined by field or laboratory testing and summarized in the geotechnical report:

1. Soil classification and elevations
2. Standard penetration values
3. Unconfined compression strength
4. Angle of internal friction
5. Cohesion
6. "In-Situ" soil density and moisture content
7. Rock quality designation (RQD) and percent rock sample recovered
8. Other properties unique to site conditions

b) The following items should be discussed in the geotechnical report:

1. Geological description of site
2. Observed and expected ground water conditions
3. Expected frost penetration depth
4. Corrosion potential of soil and corrosion protection recommendations
5. Site access and potential construction difficulties
6. Dewatering or site drainage requirements
7. Backfill material recommendations
8. Settlement considerations
9. Additional information to aid foundation designer
10. Recommended types of foundations
11. Design parameters for uplift, download and lateral load
12. Factor of safety considered when allowable vs. ultimate design parameters are provided
13. Recommended construction techniques and inspections

Products   Recently Viewed

ROHN 25G Adjustable House Bracket HB25BG 0-24"

ROHN 25G Tower 24 inch Adjustable House Bracket
ROHN HB25BG 24 inch Adjustable House Bracket
for House and Wall Standoff of a ROHN Tower Installation up to 24 inches and provides greater support of ROHN 25G Bracketed and Self Supporting Tower Installations...

Your Cart
Credit Cards Taken
Your shopping cart is empty!
Customer Service
Call Us AT 1-877-660-0974
2 Great Locations

Two Great Locations!
Ashland, VA


Orlando, FL...
Orders to these States are taxed

We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!