|
|
ROHN BPC25G Plate for Concrete Pier Placement
The BPC25G uses a 3/4" x 12" pier pin to align the plate to the slab (Separate Item). This Rohn Base Plate is 15 inches Square and 3/16 Thick, allows the ROHN 25G Tower to be Mounted on an existing Concrete Pier, but Cannot be Used as a Self Supporting Base Plate (see R-25GSSB). This Tower Base uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. The 25G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 190 feet. Self-supporting and bracketed heights depend on loading and are also specified in the ROHN catalog (click below).
ROHN Catalog
Availability: Ships out in 2 -3 days!
Shipping: Can ship anywhere!
Weight: 16 lb
|
|
 |
|
|
This Tower series is the Workhorse of America's Small and Local Communications needs; from Business-Band Radio and HAM Operators, to Off-Air Antenna TV and DTV Reception in Fringe areas outside the Surburban Broadcast Area.
Most Restrictions Allow for 45 feet of Tower Height without Guy Wires (NOT RECOMMENDED). Please remember, however, that No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy location point (height) is reached.
ROHN 25G Tower Accessories and Construction/Assembly Assistance are also available Here at 3StarInc.com... Please Refer to the ROHN 25G Tower Link at the bottom of the page or click "spec. sheet" in any ROHN 25G tower Detailed Listing for a Complete Catalog with Guy Deyails for various heights, Parts Lists and Accessories.
Call Toll-Free 877-660-0974 at anytime for assistance.
The GT Series is a line of towers designed for efficiency, strength and versatility. These durable towers are entirely welded and fabricated with precision equipment and are suited to meet a variety of needs. All towers in the GT Series are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag (copyright) solid rod bracing to provide exceptional strength. All GT Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish.
* Tower Sections Longer than 7 feet are Delivered by LTL Freight only.*
|
|
|
|
|
|
Your shopping cart is empty... Let's Fill 'er up!
|
|
Contact Us with Your Installation Questions or Sales Inquiries !
*Just Click one below!*
|
|
|
|
Click on Logos for Verification and more Information !
|
|
|
Click on Logos for Verification and more Information !
|
|
|

ROHN 25G Towers
ROHN Telescopic Masts
