Printer Friendly Tell a Friend

ROHN 25G Tower Top Microwave Satellite Dish 3.5 inch OD Mount R-25TDM35S3KD

Highlights
Hot Dip Galvanized
2 Plate accessory
Fits to 25G Main Section
 Accomodates:
3.5" DIA x 7 foot Pipe
(included)
Price$949.95
Manufacturer Code25TDM35S3KD
Stock Level: 0
Qty
AvailabilityUsually ships in 1 week
ShippingCan ship only within USA
ROHN 25TDM35S3KD Tower Top Microwave Satellite Dish Mount
Top plate includes built-in guy lugs. Bolts to swaged top of standard 25G tower Section. Lower plate connects with U-bolts. Set screws secure mounting pipe. Includes 3.50 Inch DIA x 7 Foot Mounting Pipe. Sizes are associated with these part numbers and Descriptions:

25TDMKD - Mount only (minus Pipe)
25TDM2S3KD   - 2-3/8 inch O.D. x 7 Foot Pipe
25TDM25S3KD - 2-7/8 inch O.D. x 7 Foot Pipe
25TDM3S3KD   - 3-1/2 inch O.D. x 7 Foot Pipe
25TDM35S3KD - 4 inch O.D. x 7 Foot Pipe


The Standard 25TDMKD accessory comes without the Pipe, you can refer to the other Model Numbers for Standard Pipe sizes as indicated. Your particular application may require use of six-way guying via a TA25G (sold separately).

spec. sheet



Spec. Sheet


Get Adobe Reader




ROHN 25TDMKD is Manufactured for Mounting a Real S/C/Ku Band Fixed, Offset or Steerable Dish (EL/AZ or Polar Mount) on the Top of your ROHN 25G Tower above any Trees and Buildings that may Block your view of the Satellite Orbital Arc (Clark Belt). For Tower Mounting 1.0 meter, 1.2 meter, 1.3 meter, 1.5 meter, 1.8 meter, 2.4 meter, 2.8 meter, 3.0 meter, 3.1 meter Satellite Dishes to receive SKY, IndoSat, BBC, Free to Air, Panamsat, ITV and other DBS Programming. Understand that the Physical characteristics of Composition (Solid vs Mesh) and Reflector Size will determine Wind Load that will influence the Height, Guying and Wind Survivability of the Dish, the ROHN 25G Tower and Structures they are mounted on. It is Suggested that Engineering (both Feasibility and Structural) precede any Potential Purchase of this Product Line for this purpose. ROHN Products, LLC nor 3 Star Inc, et al make no Engineering Representations as to the Suitability of this Product for use in conjuction with a Particular Dish/Mounting Scenario.
3/8 inch Round Pin Galvanized Shackle - $6.95
ROHN 3/8S Galvanized 3/8 inch Round Pin Shackle
These are the 3/8" shackles specified for use with the Torque Bar Options incorporated into GA35GD, GA45GD and GA55GD Guy Bracket Assemblies (use one for each Torque Bar, three each for a complete level).

read more...
ROHN 25G Tower Torque Arm Stabilizer Assembly R-TA25 - $329.95
ROHN TA25 Tower Torque Arm Stabilizer Assembly
Anti-Twist Mount to attach Down Guys to 25G Tower at any Tower Section Joint...

read more...
Product isn't rated yet. Write a review.

Products   Recently Viewed

ROHN 25G Tower Top Microwave Satellite Dish 3.5 inch OD Mount R-25TDM35S3KD

ROHN 25G Tower Top Dish Mount R-25TDM35S3KD
Price$949.95
ROHN 25TDM35S3KD Tower Top Microwave Satellite Dish Mount
for Mounting Satellite Dish with 3.50 inch DIA Pipe Tube Mount or other such focused beam antenna on top of the ROHN 25G Tower. Your particular application may require use of six-way guying via a TA25G (sold separately)...

Your Cart
Credit Cards Taken
Your shopping cart is empty!
Customer Service
Call Us AT 1-877-660-0974
Locations
2 Great Locations


Two Great Locations!
Ashland, VA

and

Orlando, FL...
Orders to these States are taxed

We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!