Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
Concrete Base...1$14.95
Goods Total1$14.95
View Cart Check out
Printer View Tell a Friend

Concrete Base J Bolt 1/2 x 12 inch

× Concrete Base J Bolt 1/2 x 12 inch was added to your Shopping Cart.
Price$14.95
Manufacturer Code1/2 X12BB
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights

Hot Dip Galvanized
Double Nuts Provided
Concrete Pier Placement
1/2 inch Diameter
12 inches Long
Can be used in:
Guyed
& Bracketed Config.s

Bulk Quantities Available Here!

ROHN 1/2X12BB J Bolt for Mounting Tower Base Plate on Concrete Pier


for inclusion in Concrete Pier Pouring. The BPH25G hinged base plate is drilled to use Six (6) of these 1/2 x 12 inch "J" Bolts (One Bolt per Order), and Allows for the Tower to be Rotated up from Base during Installation or Maintenance. Seek Engineering notes in Spec. Sheets. Suspend bolts in concrete pour by means of template or jig. Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.

 

 

Overview

ASTM F1554 grade 55 anchor bolts are manufactured from a modified mild steel that has a higher minimum yield strength (55 ksi) than traditional A36 mild steel (36 ksi). This specification was widely used in the Towers , light pole and traffic signal industry long before the ASTM F1554 specification was introduced in 1994 and was commonly referred to as A36M55. Just as with grade 36, grade 55 covers anchor bolts in diameters ranging from 1/4″ through 4″.

 

Configurations

ASTM F1554 anchor bolts can be straight rods (either fully threaded or threaded on each end), bent anchor bolts, or headed bolts...

 

 

  


All 25G Tower Installations should be temporarily Guyed during Erection or Take-Down.

3d view icon

While holding the mouse pointer over the 3D object, click and hold one of the 3 mouse buttons at the same time moving the mouse to navigate.
Left Button: Orbits or Rotates the camera. Right: Pans the camera. Mouse Wheel/Middle: Zooms camera in/out.

3d orbit icon
Loading 3D
Auto Rotate Panning Zooming
Rate this product.
Product isn't rated yet. Write a review.

ROHN 25G Tower Accessories

ROHN Products, LLC manufactures a Variety of Compatible Galvanized Steel Base-Plates to Facilitate Installation of your ROHN 25G Tower onto any Type of Foundation Requirement you may have. Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a susbstitution for Engineering Conducted Specific to your Application. When Selecting a Base Plate for Your ROHN 25G Tower that will affix to an existing Structure or Foundation, please evaluate that Structure or Foundation as being conducive to the Plan you envision. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 25G Tower Installation.

ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from, other Load Bearing Structures in the immediate vicinity of your ROHN 25G Tower in both Self-Supporting and Guyed Installations. These 25G Brackets are all Solid Galvanized Steel and could possibly convey considerable Load to the Structures of which they are attached. Assure yourself through Investigation that the Structure you wish to Bracket to will handle the ROHN 25G Tower's Load transferred to it as is, or can be Supplemented in some Engineered fashion as to match and counter the Load applied. As always, Consult your Local Structural Engineer and Building Code for guidance.

ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts and Top Cap Section Design differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a susbstitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.

All Information regarding the ROHN 25G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.


ROHN 25G Buyers Guide



ROHN 25G Buyers Guide


Get Adobe Reader



This Buyers Guide will answer many questions you may have on this Product Line. For more detailed information and Specification Sheets covering many aspects of Various Parts, Accessories and Installation Scenarios... Please refer to the "ROHN 25G Tower" Link appearing in the Footer of this Page Below!

Products   Recently Viewed