6in x 66in Thimbleye Anchor Rod

J6526WCA Thimbleye 6in x 66in Ground Anchor

Anchor , No Wrench 6in x66in Helix Thimbleye , Integral forged eye anchor with helix welded to shaft.May be installed by Hand or machine .Hot Dipped Galvanized .No-Wrench anchors can be installed to a greater depth to reach firmer soil.These heavy duty anchors are used for securing Poles, Towers and Similar structures .No special Tools needed , simply turn/screw anchor into ground using strong bar placed thru the anchor eye .

Note

Anchor requirements are site specific. Soil type should be determined to ensure that the correct anchors are used. Always seek professional guidance. Anchors must be installed at an angle of 45º in the direction of the load. Failure to install within 5º of alignment of the guy load will significantly lower strength. Capacity ratings apply to properly installed anchors only.

Rate this product.

Product isn't rated yet. Write a review.