3 Star Inc
Made in the USA!
This 4 section 16 gauge inner, 18 gauge outers, Telescopic Antenna Mast collapses down to 95 inches in length for Shipping.
Extended Mast Height is 27' 7" and is used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas.
Manufacturers recommend that masts heights of 10 feet and higher above the uppermost bracket be guyed for Addition Wind Load Support. Bonding/Grounding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance
(Antenna, Guys and Mounts not included).
27' 7" extended Height
This Item Ships UPS Package!
Mast Section Dimensions are:
(1) 94" length x 1.25" O.D. (16 AWG)
(2) 92" length x 1.50" O.D. (18 AWG)
(3) 90" length x 1.75" O.D. (18 AWG)
(4) 88" length x 2.00" O.D. (18 AWG)
We stock the highest quality telescopic masts made from 18 and 16 AWG galvanized steel right here in the USA. These telescoping push up poles are suitable for tons of applications where a fast an simple extension is needed. They have been used for everything from digital TV antenna applications to wireless communications to weather stations and even IoT Sensors. The masts can be used retracted or fully extended and anywhere in between. They can be supported and mounted against a structure, mounted on a roof or even guyed in the middle of a field. Our reliable and durable telescopic poles come in heights of 20, 30, 35, 40 and 50 FT and all have a engineered thumbscrew/collar system for setting height.
Note:
These telescoping masts are not recommended for commercial, CB or beam antenna installations.
Antenna load (top load ) should not exceed an effective projected area ( EPA ) of 2 square feet ( see your antenna specifications
Looking for just a simple mast pipe? View our similar antenna mast poles for lengths ranging from 5 FT to 10 FT and our variety of telescopic mast mounts to complete your next installation.