Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
HOLLAND 8-Way...1$9.95
Goods Total1$9.95
View Cart Check out
Printer View Tell a Friend

75 Ohm F Port Screw on Terminator

Price$0.55
Qty
1-9
10+
Price
$0.55
$0.45
Manufacturer CodeF-75
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights
75 Ohm Termination
Anti Corrosive Finish
Small Size 7/16" Nut
Precision Machined Threads

Bulk Quantities Available Here!

NIPPON F-71 75 Ohm F Port Terminator
This is plated with an anti-corrosive finish, 7/16 " nut of extremely small size for non-security Termination of Unused "F" Ports. This terminating resistor for a Television cable or Splitter is in the cap form, Commercial Quality, threaded to screw onto an F Female (F-81) connector.Use for non-security Termination of Unused "F" Ports on Test Equipment and Signal Sources. Terminate open splitter ports to prevent Ingress and Egress of RF Signal that could interfere with Modem Transmission...

spec. sheet




Spec. Sheet


Get Adobe Reader




Rate this product.
Product isn't rated yet. Write a review.

An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.

Products   Recently Viewed