Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
Antronix 4...1$3.60
Goods Total1$3.60
View Cart Check out
Printer View Tell a Friend

Antronix 4-Way Cable TV Antenna Splitter 1 GHz CMC2004H

× Antronix 4-Way Cable TV Antenna Splitter 1 GHz CMC2004H was added to your Shopping Cart.
Price$3.60
Manufacturer CodeCMC2004H
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights
6 kV ring wave surge protected
Low Spurious Harmonics
Digital broadcast and HDTV ready
Flat 1 GHz bandwidth
Eclipse Contact Technology F-port
Capacitively coupled F-ports
Zinc Alloy diecast housing
100 % soldered back
1 inch port-to-port spacing
Integrated mounting tabs and heavy duty
ground block for years of reliable service

Bulk Quantities Available Here!

Antronix CMC2004H 4-Way Horz. Splitter 5-1000 MHz. with Ground.
Low intermodulation design and optimized return band prevents high cable modem signals from affecting forward band transmission. Reliability, quality and performance define the Antronix CMC2000 series digital splitter. The horizontal digital splitter has been designed specifically for today’s two-way broadband networks. Low intermodulation distortion and 40 dB port-to-port return band isolation prevent high power cable modem signals from distorting neighboring port signals. Capacitively coupled F-ports block AC surges and prevent hum modulation. Additionally, the digital splitter is among the most robust in the industry. Every port on each CMC2000 series splitter is 6 kV ring wave surge protected, while proprietary ferrites remain ultralinear following several surges. To ensure years of reliable performance, Antronix’s digital splitters are encased in a Zinc Alloy diecast housing with Nickel Alloy plating. The splitter ports are sealed to 15 psi and SCTE compliant with 1 inch spacing. The CMC2000 series digital splitters employ high “Q” surface mount technology (SMT) components, guaranteeing consistent performance over time and temperature. The CMC series digital splitter is ideal for present and future multimedia applications including video, telephony, and transmission sensitive digital signals such as QPSK and QAM data. Ideal for digital and cable modem applications with high surge resistance and unique plating for unmatched corrosion resistance to withstand harsh environments.

spec. sheet



Spec. Sheet


Get Adobe Reader




Rate this product.
Product isn't rated yet. Write a review.

4-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Four (4) in order to Provide Signal to 4 Independant Devices, or Three More Cables to complete the Run(s) to their Final Destination(s). Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.