Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
HOLLAND 2-Way...1$1.60
Goods Total1$1.60
View Cart Check out

Categories

Printer View Tell a Friend

Antronix CMC2002H 2-Way Horizontal Splitter 5-1000 MHz

Price$1.60
Manufacturer CodeCMC2002H
Stock Level: 0
AvailabilitySee Related Products

Highlights
* 6 kV ring wave surge protected
* Low Spurious Harmonics
* Digital broadcast and HDTV ready
* Flat 1 GHz bandwidth
* Eclipse Contact Technology F-port
* Capacitively coupled F-ports
* Zinc Alloy diecast housing
* 100 % soldered back
* 1 inch port-to-port spacing
* Integrated mounting tabs and heavy duty
   ground block for years of reliable service

Bulk Quantities Available Here!

Antronix CMC2002H 2-Way 1 GHz Coaxial Cable TV Antenna Signal Splitter
Low intermodulation design and optimized return band prevents high cable modem signals from affecting forward band transmission. Reliability, quality and performance define the Antronix CMC2000 series digital splitter. The horizontal digital splitter has been designed specifically for today’s two-way broadband networks. Low intermodulation distortion and 40 dB port-to-port return band isolation prevent high power cable modem signals from distorting neighboring port signals. Capacitively coupled F-ports block AC surges and prevent hum modulation. Additionally, the digital splitter is among the most robust in the industry. Every port on each CMC2000 series splitter is 6 kV ring wave surge protected, while proprietary ferrites remain ultralinear following several surges. To ensure years of reliable performance, Antronix’s digital splitters are encased in a Zinc Alloy diecast housing with Nickel Alloy plating. The splitter ports are sealed to 15 psi and SCTE compliant with 1 inch spacing. The CMC2000 series digital splitters employ high “Q” surface mount technology (SMT) components, guaranteeing consistent performance over time and temperature. The CMC series digital splitter is ideal for present and future multimedia applications including video, telephony, and transmission sensitive digital signals such as QPSK and QAM data. Ideal for digital and cable modem applications with high surge resistance and unique plating for unmatched corrosion resistance to withstand harsh environments.

spec. sheet



Spec. Sheet


Get Adobe Reader




When a Major Cable TV Manufacturing company comes out with a New item, it's a Big Deal.  It has everything that the big Cable TV Companies and the SCTE Engineers have asked for; and this is it. Antronix has secured its place in the Market with this 1 GHz 2-way splitter. The Center Conductor Seizure Mechanizm and Transient Voltage Protection are State-of-the-Art. This is the same Splitter that the Big Cable TV Companies use. It will pass Forward and Return signals; making it perfect for Splitting Cable TV with High-Speed Internet Connection Signals. The Solder Sealed Casing and Voltage Protection also makes it suitable for splitting HD TV Antenna Signals as well. The Flat "F" Connector ends means that the connection to the RG coaxial cable you use (RG-6 or RG-11) is solid, secure and doesn't slip or back off after tightened with appropriate force (most Coaxial Cable Manufacturers specify in inch/pounds). When making RG-6 or RG-11 cable connections outside, a weather boot covering and some sort of Silicone compound are highly recommended.

2-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Two (2) in order to Provide Signal to 2 Independant Devices, or One More Cables to complete the Run(s) to their Final Destination(s). Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.