Avlite’s LED obstruction lights offer an ultra bright, energy efficient and cost effective lighting solution. The light fixture uses a DC 12–48VDC power source.
The dual light fixture can be configured to different operational states. Both light fixtures may be set to operate steady-burning. Alternatively, the dual light fixture may consist of a main light and a standby light. If the main light should ever fail the standby light will automatically switch on to ensure the obstacle is always clearly marked.
The advanced light optic uses a single LED for minimal power consumption. The corrosion resistant, polycarbonate lens is specifically designed for use with LEDs to maximize light intensity and uniformity. Integrated photo-cell controls the day/night operation without the need for a separate photo-electric controller.
The light fixture incorporates internal diagnostic checking and an alarm contact for remote monitoring. The alarm relay is energized in normal operation and is released if there is an LED or power fault.
All obstruction lights also have an adjustable operation mode setting to allow the user to easily toggle between dusk-till-dawn and 24 hour operation modes.
Energy efficient lighting solution Low maintenance costs
Low LED power consumption
Alarm contact for remote monitoring Integrated light sensor for day/night
operation
Simultaneous twin operation or redundant failsafe
Mark obstacles up to 150 feet (45 meters) above ground
Low Intensity Obstruction Light for marking top of obstacles that do not exceed 150 feet (45
meters) in height
Solar power configurations Combined visual and
Infrared visibility
GSM monitoring Available in universal DC
(12-48VDC) or AC (110-240VAC)
Adjustable operation mode
FAA Engineering Brief No. 67D
FAA L-810 Low Intensity Obstruction Light, FAA AC NO: 150/5345-43G
DGAC L-810, Low Intensity Obstruction Light