Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Commscope RG11...1$990.00
Goods Total1$990.00
View Cart Check out
Printer View Tell a Friend

Commscope RG11 2287K Plenum Rated Coaxial Cable Quad 1000 Feet

× Commscope RG11 2287K Plenum Rated Coaxial Cable Quad 1000 Feet was added to your Shopping Cart.
Manufacturer Code2287K
Stock Level: 19
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada


RG11 Quad Shield
14AWG Copper Clad Steel Conductor
Plenum Rated Jacket
Impedance: 75 OHM

Sequential Foot Markers

1,000' Reel

Bulk Quantities Available Here!

Commscope 2287K 1000' Reel RG11 Quad Shield  Plenum Coaxial Cable

RG11 Plenum Rated Quad Shield Cable is made of Fire Retardant Materials, will not burn easily nor emit toxic fumes when exposed to extreme heat. Because of these requirements, Plenum cable is more expensive than non-Plenum cable and Should be used to State and Local Building Codes. Only there will you find what They consider to be Plenum spaces. This Cable is a little more Economical as it has a Standard 95% Tinned Copper Braided Shield as opposed to more Expensive Quad Shield. Consisting of 14awg Solid Bare Copper Conductor , encased in a Black Plenum Low Smoke PVDF ( CMP Rated ) Jacket. Professional Grade Plenum Rated Jacket RG11 95% Braid cable is ideal for distributing signals from roof antenna, cable TV and satellite TV. ,and hidden space within a building which is used for HVAC (Heating, Ventilation, and Air Conditioning). Our cable is swept tested  to ensure high performance. UL Listed. With its low smoke Plenum Jacket (CMP), it can be installed in air plenums and ducts in accordance with NEC Article 800...
Plenum (CMP Rated)


Buyers Guide
Spec Sheet
Commscope RG11 2287K Plenum Rated Coaxial Cable Quad 1000 Feet
Rate this product.
Product isn't rated yet. Write a review.

This RG11 Cable Product is designed for General Interior and Exterior Usage (NOT for Direct Burial). It Features a PVC Jacket with various layers of shield. RG11 (RG-11) is to 75 Ohm as RG213 or RG214 is to 50 Ohm cable. RG11 Cable featuring 60% Braided Shield is comprised of an Aluminum Foil bonded to the Foam Dialectric with Aluminum Braided Shield with 60% coverage. Quad Shield RG11 would denote alternating Aluminum Foil and Aluminum Braided Shield Layers, starting with the Bonded Foil Layer around the Foam Dialectric, with the better Quad Shield having 2 Layers of Braided Aluminum Shield, one of 60% and the 2nd at 40%. Tri-Shield RG11 will have 77% Braided Aluminum Shield Coverage Between 2 Layers of Aluminum Foil Shield, the 1st Foil Layer being Bonded to the Foam Dialectric. RG11 is the lowest loss Flexible Braided Shield Drop cable Commercially Manufactured for Satellite TV, TV Antenna and Cable TV usage. Use for distances over 150 feet or when every dB counts. For Cable with less loss than RG11, one would then have to avail themselves to Hardline Coaxial with a Single Solid Shield (typically Aluminum) that is pricey, but delivers commensurate Results for the Money. Most all RG11 Manufactured uses Aluminum Braided Shield, the difference of note being the amount of Aluminum Braid Coverage and the composition of the Center Conductor; Solid Copper vs. Copper Clad Steel. Copper Clad Steel will suffice in almost any utilization scenario, however most Satellite TV Operating companies will require Solid Copper Center Conductor to be used by their respective Sub-Contractor Installers for Maintainence and Warranty issues. This is due to the DC Voltage component being fed from the Receiver back to, and Powering the LNB(f)s mounted on the Satellite Dish. Unless the run is extremely long and the connectors applied are of dubious Quality, the DC Loop Resistance difference between Solid Bare Copper and Copper Clad Steel is negligible.