TURNBUCKLES / CLEVICES / STRANDVICE
Hot Dipped Galvanized is used to adjust the tension on Guyed Towers
GUY WIRE
3 Star stocks guy wire for use in guying antenna masts and ROHN 25G, 45G, 55G and 65G towers. Choose from 6/18 and 6/20 for telescopic antenna masts and 1/4 inch to 5/16 inch EHS strand for guying down ROHN Towers. Our 6/18 and 6/20 guy wire comes in lengths of 50' , 100' , 250 ,500, to 1000' FT and our EHS Tower Guy wire comes in 100' , 250' , 500' ,1000, in coils / reels and 5000' FT wooden spools. PLP-GWD Guy wire Despenser available ( optional )
Complete Telescopic Guy Wire Kits are also available.
ANCHORS
Guy Anchors are used to attach the guy-wire that helps support a tower, antenna mast or even utility poles. The anchoring is accomplished by using rods, usually made from galvanized steel, that are screw driven, concreted into the ground or backfilled with earth.
An anchor must be designed and rated to resist the maximum amount of tensile load, forces tending to cause extension of the guy wires and anchoring system; both the dead load of the tension of the wire and the maximum possible theroretical live load due to wind, gravity, ice and other forces of nature. The attached guy wires exercises its force at an angle, and because of this angle the anchor will have r two forces of both, vertical or (up and down) and lateral (back and forth) forces on it known as lateral shear. Ground anchors rely on the lateral shear strength of the soil. This strength or cohesion helps to mitigate by spreading the the forces from the guys wires connected to it over a large surface area.
HARDWARE ANCHOR & GUY
3 Star Inc. stocks wire rope and EHS (Extra High Strength) strand wire rope commonly used in rigging, Tower down guy and CATV Cable TV and Telephone OSP Pole line Plant construction.
In addition you can find:
All in stock. We ship same day.