Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
Holland Electronic...1$2.95
Goods Total1$2.95
View Cart Check out
Printer View Tell a Friend

Holland Electronics DPD2 DISH Pro Signal Diplexer

× Holland Electronics DPD2 DISH Pro Signal Diplexer was added to your Shopping Cart.
Price$2.95
Manufacturer CodeDPD2
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights
Insertion loss: 1.5dB max
Return Loss: 12dB/TV
                    15dB/SAT
Impedance 75 Ohms
Stop Band Rej: 40dB
for LNB Powering
Machined F-Connector Threads
Solder Back Cover

Bulk Quantities Available Here!

Holland Electronics STVC Satellite TV Signal Diplexer
Appears on the DISH Network Approved List!

The DPD2 allows the combining and/or separating of Off-Air / CATV signals with satellite signals to a common cable. Separates TV and satellite signals prior to satellite receiver input and filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer is specifically designed for Dish Network’s™ DP44 installations, requiring continuous 2 amp power passing. This diplexer provides a high performance, lower insertion loss, high return loss and increased stop band isolation. The DPD2 provides a more reliable combining solution for the increased demands of the DishPro Plus installations, which may require 2 amps of current.

spec. sheet



spec. sheet


Get Adobe Reader




Rate this product.
Product isn't rated yet. Write a review.

DISH Network Approved

The DISH Network approved products list is issued by them and changes without notice. Approved Accessories are required from the Dish Antenna to the Receiver and all components used in mounting and grounding. Items developed and distributed directly from Echostar Satellite LLC are to be considered as acceptable by default. DISH Network develops this list to assure quality and longevity to your DISH Network experience.

Tested by their Labs and Approved by their Engineering Team, these parts represent high quality components that are utilized in other Installations as well. Not all parts used in DISH Network Installations are "Controlled Items" and "Custom" installations may require special materials not found on the list. A Prime example of this is RG11 cable, which is absolutely necessary for long distances between the Dish and the Receiver, but is not addressed at all by the "Approved" list. "Reasonable is as Reasonable does", if you find yourself in a particular "tight spot", ask a DISH Network Installer for advice, and then buy the materials needed from one of the same places they do!

These are the Products that appear directly on the DISH Network approved list. We have many more Products that Installers use that are not covered by any list. Feel free to browse for those items by Category directly! DISH Network in no way endorses this website or the Products carried by same that appear on their list.

Products   Recently Viewed