Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

PL-259 Teflon Male UHF Solder Connector

Manufacturer CodePL-259-T
AvailabilityUsually ships in 24 Hrs
ShippingCan ship anywhere

UHF PL-259
Silver Plated Finish
Precision Machined Mating
Ideal Return Loss
Teflon Dialectric
UHF Male Connector

Bulk Quantities Available Here!

3 Star PL-259-T Teflon Dialectric Male UHF Solder Connector
(1 each/unit) This is a brass body silver plated finish with Teflon Dialectric, Commercial Grade and Quality. Use this connector RG-8, RG-213, LMR-400, and Belden 9913. Select reducers for use with other cable sizes.

Rate this product.
Average Customer Rating: 5 based on 1 reviews. Write a review.

sparks (Guest)
they are the correct ones
real stuff, not cheap copy

The UHF threaded RF coaxial connector is also called an Amphenol connector generally usable through the VHF and HF frequencies and can handle RF power levels over one kilowatt. At low frequencies the power handling is rather better than that of the similar sized N connector. The UHF connector is the most common connector in amateur radio applications up to 150 MHz. In the US, the silver-plated version with Teflon dielectric is used in UHF applications up to 450 MHz for the 70 cm band. The most popular cable plug and chassis-mount socket carry the old Signal Corps nomenclatures PL-259 (plug) and SO-239 (socket). The PL-259 can be used with large diameter coaxial cable, such as RG-8/U and RG-9/U, and the smaller diameter RG-58/U and RG-59/U with the UG-175/U and UG-176/U adapter sleeves. "PL-259" refers to one specific mechanical design, but the term is often used for any compatible UHF cable plug. The thread is 5⁄8 inch 24tpi UNEF standard. Other UHF connectors with a similar, metric, thread have been produced. The center conductor jack on the SO-239 will also accept a 4 mm banana plug.

UHF connectors have been replaced in many applications by designs that have a more uniform impedance over the length of the connector, such as the N connector and the BNC connector, but they are still widely used in amateur radio, citizens' band radio, and marine VHF radio where robustness and ease of use are more important than a small mismatch. The reasons for the popularity of the UHF connector is its ease of assembly. While crimp connectors exist, the solderable screw-on connector is more common because no expensive crimping tools are required. The connector is not suitable for outdoor applications by itself but can be made weather resistant with self adhesive silicone C-Tape.

Products   Recently Viewed