Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
ProductQtyPrice
Broadband Digital...1$26.95
Goods Total1$26.95
View Cart Check out
Printer View Tell a Friend

RG11 Standard Shield 14AWG Coaxial Cable 1000 Feet

Price$129.95
Manufacturer CodeF1160BVV
Stock Level: 3
Qty
AvailabilityUsually ships in 24 Hrs
ShippingCan ship Canada

Highlights
PVC Jacket
(2)100% Foil Coverage
(1)60% Braid
Standard Shield!

Bulk Quantities Available Here!

F1160BVV 1000' RG11Standard Shield 60% Braid Coaxial Drop Cable


75 Ohm Coaxial Drop Cable, Series 11 , 60% Braid, Standard Shield ,14awg Solid Conductor , black flame retardant PVC jacket .Install out of the Box for General Utility Cable TV and some Satellite and Antenna applications. This is really big cable with low RF Signal loss for Cable TV, some Satellite and Antenna applications where the Coaxial Cable RF / IF Signal Feed needs to be Installed Inside or Outside for long distances between Equipment and Premise. Low Signal Loss General Utility Coaxial that Features a PVC (Poly Vinyl Chloride) Jacket over (1) layer of 60% Aluminum Braid, Aluminum Foil Bonded Foam Dialectric with a Copper Clad Steel Center Conductor. Perfect for HDTV, DTV, DBS, Cable TV, Master Antenna and Satellite Master antenna Applications with 1.0 GHz Bandwidth. Can Also be Utilized as an Underground Signal Feed Transmission line from Towers, Dishes, Antennas and Telephone Poles to Home, Office and Premise.



Note

Single Shield (60% Braid) - Utility grade cable, this construction is based on the standard bonded foil (100%) dialectric, then adds an additional layer of shielding of braided aluminum (60%) to provide an economical solution that provides adequate isolation from most average network interference. Provides low attenuations for service drop inter-connecting jumper cables when compared to RG6 and RG59.
Specification Sheet






Certifications
Front Side Bus Speed
533MHz
L2 Cache
2MB
Speed
1.33GHz
Technology
Intel® Centrino® Duo Processor Technology
Type
Intel® Core™ 2 Duo Processor U7700
Diagrams
Screen Size
11.1
XBRITE-HiColor™ Technology
Yes
Technology
WXGA
Resolution
1366 x 768
Cable Compatibility
Interface
Serial ATA
Speed
5400rpm
Capacity
320GB
Rate this product.
Product isn't rated yet. Write a review.

This RG11 Cable Product is designed for General Interior and Exterior Usage (NOT for Direct Burial). It Features a PVC Jacket with various layers of shield. RG11 (RG-11) is to 75 Ohm as RG213 or RG214 is to 50 Ohm cable. RG11 Cable featuring 60% Braided Shield is comprised of an Aluminum Foil bonded to the Foam Dialectric with Aluminum Braided Shield with 60% coverage. Quad Shield RG11 would denote alternating Aluminum Foil and Aluminum Braided Shield Layers, starting with the Bonded Foil Layer around the Foam Dialectric, with the better Quad Shield having 2 Layers of Braided Aluminum Shield, one of 60% and the 2nd at 40%. Tri-Shield RG11 will have 77% Braided Aluminum Shield Coverage Between 2 Layers of Aluminum Foil Shield, the 1st Foil Layer being Bonded to the Foam Dialectric. RG11 is the lowest loss Flexible Braided Shield Drop cable Commercially Manufactured for Satellite TV, TV Antenna and Cable TV usage. Use for distances over 150 feet or when every dB counts. For Cable with less loss than RG11, one would then have to avail themselves to Hardline Coaxial with a Single Solid Shield (typically Aluminum) that is pricey, but delivers commensurate Results for the Money. Most all RG11 Manufactured uses Aluminum Braided Shield, the difference of note being the amount of Aluminum Braid Coverage and the composition of the Center Conductor; Solid Copper vs. Copper Clad Steel. Copper Clad Steel will suffice in almost any utilization scenario, however most Satellite TV Operating companies will require Solid Copper Center Conductor to be used by their respective Sub-Contractor Installers for Maintainence and Warranty issues. This is due to the DC Voltage component being fed from the Receiver back to, and Powering the LNB(f)s mounted on the Satellite Dish. Unless the run is extremely long and the connectors applied are of dubious Quality, the DC Loop Resistance difference between Solid Bare Copper and Copper Clad Steel is negligible.

Products   Recently Viewed