ROHN 55G110R190 190' foot 55G Guyed Tower Complete Kit 110/90 MPH Rated
|
Price:
$16,960.00
|
| Highlights: |
Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/2" Steel Tubing
Side Rails
17" Equilateral
Triangular Design
Can be used in:
Self Support Config
|
|
|
Availability: Call to Order or Request Quote
Weight: 2800 lb
|
Description  |
ROHN 55G110R190 190' foot 55G Guyed Tower Complete 110/90 MPH Rated Kit
 Made in the USA!
The ROHN 55G110R190 190' foot 55G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 55G110R190 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 190 Foot ROHN 55G Tower with EPA Ratings (Effective Projected Area) for 110 MPH (Rev. G) and 90 MPH (Rev. F).
This ROHN 55G Tower is to be used in a Guyed Configuration for Wireless Internet, Amateur and Business Radio, SCADA, DBS and Satellite Services, Cellular and Repeater, Smaller Microwave, Narrow Beamwidth Antenna or Broadcast Installations according to Specifications in the ROHN Catalog.
As a Guyed Structure, a 110 MPH Rated ROHN 55G Tower can rise to a Maximum of 300 Feet.
Click on the More Info and Specification Tabs above for all the Information You Need on this Product including EPA (Effective Projected Area wind load permissible of Antenna Surface Area in Square Feet), Foundation, Guying, Assembly and Grounding Detail Information.
This Item Ships LTL Freight ONLY!
EPA for Exposure B / Revision G = 21.7 (Sq. Ft.)
EPA for Exposure C / Revision G = 17.8 (Sq. Ft.)
EPA at ( 90 MPH) per Revision F = 15.6 (Sq. Ft.)
THE 55G110R190 KIT INCLUDES THE FOLLOWING:
| BILL OF MATERIALS: 55G110R190 110/90 MPH RATED PRE-ENGINEERED KIT |
| QUANTITY |
PART NUMBER |
DESCRIPTION |
| 1 |
APL55G |
Top Beacon Plate for 55G |
| 19 |
55G |
10' Main Tower Section |
| 19 |
25JBK |
Bolt Kit for 55G Tower Section |
| 1 |
BPC55G |
Standard Concrete Base Plate |
| 5 |
GA55GD |
Guy Wire Bracket Assembly |
| 775 ft |
5/16EHS |
5/16” Extra High Strength Strand |
| 675 ft |
1/4EHS |
1/4” Extra High Strength Strand |
| 1,650 ft |
3/16EHS |
3/16” Extra High Strength Strand |
| 15 |
PLP-115 |
Yellow Plastic Guard for Down Guys |
| 6 |
BG2146 |
5/16" Big Grip Preform Dead-ends |
| 6 |
BG2144 |
1/4" Big Grip Preform Dead-ends |
| 18 |
BG2142 |
3/16" Big Grip Preform Dead-ends |
| 6 |
7/16THH |
7/16" Heavy Duty Thimble |
| 6 |
3/8THH |
3/8" Heavy Duty Thimble |
| 18 |
5/16THH |
5/16" Heavy Duty Thimble |
| 15 |
5/8TBE&J |
5/8" x 12" Turnbuckle Eye-to-Jaw |
| 3 |
TBSAFETY |
Turnbuckle Safety Wire and Clamps Kit includes:
(1) 14001 – 1/4” Galvanized Guy Clamp
(1) 1/44GW15 – 1/4” x 15’ Guy Wire |
| 3 |
GAC5655TOP |
120" Guy Anchor with 5 Hole Equalizer Plate |
| 1 |
AGK1GGX |
Anchor Rod Ground Kit includes:
(3) 15' of 7/16 EIP IWRC RRL
(3) 5/8" x 10' Galvanized Ground Rod (AKA 6260)
(3) 3/4” Clamp No. 8034 WB (AKA 340016)
(3) CPC.5/.75 Anchor Rod Clamp |
| 3 |
BGK2GGX |
Tower Base Section Grounding Kit includes:
(1) 15' of 7/16 EIP IWRC RRL
(1) 5/8" x 10' Copper Clad Ground Rod
(1) 3/4" Clamp Ground Rod Clamp
(1) CPC1.5/2 Tower Section Rail Clamp |
| 3 |
CPC1/1.25 |
Anchor Rod Clamp |
| 1 |
3/4x12PP |
Concrete Base Plate Pier Pin Insert |
| 1 |
ASSEMBLY GUIDE |
Printed Specification/Assembly Guide |
|
Note: Guyed Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the Downward force of all Downguy tensioned as specified, terminated to a properly embedded Anchor, the weight/size of the Foundation and the cohesive of the soil to prevent skid/pullout and all together to counter a Structural Failure or Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Ice Load, Transmission Cable Loads, Height, Standard Soil Conditions, Surrounding Environment and Duty (Exposure Categories).
The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project.
It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or Fill Out the Tower Quote Data Sheet Form found by clicking the Specification Tab above and send to 3 Star Inc./ROHN for a review.
*Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
|
Specification |
Images |
|
ROHN 55G110R190 190' foot 55G Guyed Tower Complete Kit
ROHN 55G110R190 190' foot 55G Guyed Tower Complete Kit
|
| |
|
Print this page
Download PDF