ROHN DM654 Microwave Dish Antenna Mount with 5' foot by 4.50" OD Pipe for 65G Tower

ROHN DM654 Microwave Dish Antenna Mount with 5' foot by 4.50" inch OD Pipe for 65G Tower
Made in the USA!
The ROHN DM654 Microwave Dish (or Other Narrow Beamwidth) Antenna Mount includes (2) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any (1) of the (3) Faces of a 65G Tower Section. Also includes a 5' foot by 4" inch SCH40 (4.5 inch OD) Pipe attached via U-bolts to the center of the Brackets, that in turn, are attached to the (2) leg rails on each side of the Tower Face via additional U-Bolts. A ROHN TA65 Tower Torque Arm Stabilizer Assembly is recommended in the immediate vicinity of this Mount.

The ROHN DM654 mount goes together quickly, with a minimum of bolted connections. The angle steel cross members connect directly to the tower legs with easy-to-use U-bolts. This mount is hot dip galvanized.

**This Kit Includes**
DM654
QUANTITY	PART NUMBER	DESCRIPTION	DRAWING NUMBER
2	KY1555	Dish Mount Bracket	B881440
1	KY171	Tie-Back Angle	8760806
1	KH279	4" STD x 5' Mounting Pipe	B770160
2	KY1549	Mounting Clip Angle	B881436
4	210018GA	1/2 x 1 1/2" Bolt Assembly	C770404
12	JR60A	3/8" U-Bolt Assembly	B651028
4	JR63A	3/8" U-Bolt Assembly	B651028
24	250008G	3/8" Flat Washers	N/A

Warranty Sheet