ROHN DM654TB Microwave Dish Antenna Mount w/Tie-Back 4.50" OD Pipe for 65G Tower

ROHN DM654TB Microwave Dish Antenna Mount with Tie-Back Rail and 5' foot by 4.50" OD Pipe for 65G Tower
Made in the USA!
This ROHN DM654TB Microwave Dish Antenna Mount is comprised of (3) Angle Iron Hot Dip Galvanized Steel Crossmembers that Bolt directly to any of the 3 Faces of a Standard 65G Tower Section. (2) Crossmembers are used to support a vertical 5 Foot x 4 inch STD (4.5 inch OD) Pipe, to which A Microwave (or similar style Narrow-Beam) Antenna would mount upon. The 3rd Crossmember connects with U-bolts to the inside of the Tower Section Face to provide Tie points to accommodate Large Dish Tie-backs (provided by Your Antenna Manufacturer) onto the same 65G Tower Section. A ROHN TA65 Tower Torque Arm Stabilizer Assembly is recommended in the immediate vicinity of this Mount.

The ROHN DM654TB mount goes together quickly, with a minimum of bolted connections. The angle steel cross members connect directly to the tower legs with easy-to-use U-bolts. This mount is hot dip galvanized.

**This Kit Includes**
DM654TB
QUANTITY	PART NUMBER	DESCRIPTION	DRAWING NUMBER
2	KY1555	Dish Mount Bracket	B881440
1	KY171	Tie-Back Angle	8760806
1	KH279	4" STD x 5' Mounting Pipe	B770160
2	KY1549	Mounting Clip Angle	B881436
4	210018GA	1/2 x 1 1/2" Bolt Assembly	C770404
8	JR60A	3/8" U-Bolt Assembly	B651028
4	JR63A	3/8" U-Bolt Assembly	B651028
16	250008G	3/8" Flat Washers	N/A

Warranty Sheet