ROHN BPH25G Hinged Base Plate for 25G Guyed or Bracketed Tower
Made in the USA!
The ROHN BPH25G Hinged Base Plate for 25G Guyed or Bracketed Towers is Bolted to a Concrete Pier Placement. The BPH25G is pre-drilled for use with six (6) 1/2 x 12 inch J-Bolts or Equivalent Embedded in Concrete Pier Pad during pour(Seek Engineering notes in Spec. Sheets, J-bolts Sold Separately), and Allows for the Tower to be Rotated up from Base during Installation. This ROHN Base Plate is 15 inches Square for the ROHN 25G Tower to be Mounted on a new or existing Concrete Pier. This Base for the 25G tower can be used in guyed or bracketed, but not self-supporting configurations according to specifications in the ROHN catalog.
All 25G Tower Installations should be temporarily Guyed during erection.
Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.
FOR USE WITH GUYED AND BRACKETED TOWERS ONLY
IT SHALL BE THE CUSTOMER'S OR INSTALLER'S RESPONSIBILITY TO PROVIDE STRUCTURALLY ADEQUATE SUPPORTS FOR BASE and ANCHOR CONNECTIONS.
IT MAY ALSO BE NECESSARY FOR THE CUSTOMER/INSTALLER TO DETERMINE THAT THE INSTALLATION COMPLIES WITH LOCAL CODES.
Print this page
Download