Easy Up EZ 28-24 Antenna Chimney Mount 3 inch Z Style Brackets for 1.00 to 1.50" OD Mast & 12' Straps
Made in the USA!
The Easy Up EZ 28-24 Antenna Mast Chimney Mount Set of (2) Heavy Duty "Z" Style Brackets with Hardware Including (2) 12 foot steel straps (maximum chimney circumference) for a 3 inch Standoff Chimney Support of Light to Medium Duty Antennas on Mast Poles from 5 to 10 feet long and from 1.00 to 1.50 inches in Outside Diameter for Off-air and OTA TV, UHF/VHF Radio, Remote Telemetry Control and Monitoring Stations, Cellular Date Gateways, WiFi, Wireless Internet, Receivers, Boosters and Repeaters.(Mast Not Included)
These mast mountings are typical and generally require the cantilever distance between the mounts be one quarter (1/4) to one third (1/3) of the mast length depending on Wind Load, starting from the bottom with 2 feet between brackets being a minimum distance. All Masts greater than ten feet in length, and/or 2" inches or greater in O.D. should be based upon and from the ground in rising up to the desired height.
Also for Telescopic Mast Poles comprised of 1.25", 1.50", 1.75", 2.00" and 2.25" Tubes nested together and then extended, these chimney mounts can supplement structural support but are not designed to take the place of a Base in Supporting the weight of the Mast off the ground or guying. Be sure and check that the Tube segments you wish to support with a chimney mount will fit within the Outside Diameter Window specified that the Brackets will accommodate. Set screw installation may require some field drilling.
Manufacturers recommend that ALL masts above 10 feet from their uppermost support be Guyed
With more height in your installation, Grounding/Bonding is a recommended consideration.
Print this page
Download