Rohn 3/8TBE&E Turnbuckle 3/8 x 6 inch Round Eye to Eye

ROHN R-3/8 TBE&E-6 Turnbuckle for Tower Down Guy 3/8" x 6" Eye to Eye
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Round Eye, Open Body, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs.

FEATURES
Turnbuckles are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of galvanized steel, our turn buckles are built to last and weather resistant .

SPECIFICATIONS

Item#

3/8" TBE&E

Product Name

Turnbuckle, Eye and Eye, Galvanized, 3/8" x 6"

Type

Eye and Eye

Diameter

3/8 "

Take-up

Closed Length

12"

Working Load Limit

1200 lbs. (5 to 1 Safety Factor)

Material

Forged Steel

Finish

Hot Dip Galvanized

Specification

Federal Spec FF-T-791B Type 1 Form 1

Typical Use: For attaching and tensioning ROHN Tower Down Guy Terminations when utilizing 3/16" Strand (via 3/16" Pre-formed Dead-End with 5/16" Thimble or 3/16" Cable Clamps with 3/16THH Thimble), 1/4" Strand (via 1/4" Pre-formed Dead-End with 5/16" Thimble or 1/4" Cable Clamps with 1/4THH Thimble), and 618/620 Bare Wire (via Cable Clamps or Gripple with 1/4THH Thimble) through One Eye, with the Other Eye bolted through while "Sandwiched" between Dual Equalizer Plate Anchor Assemblies such as the GAC305, EP25345 or GAC303, EP25343.
Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.