Rohn 1/2x12TBE&J Turnbuckle 1/2 x 12 inch Round Eye to Jaw

ROHN R-1/2 TBE&J-12 Turnbuckle for Tower Down Guy 1/2" x 12" Round Eye to Jaw
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Round Eye, Open Body, Working Load Limit: 2200 lbs. Ultimate Strength: 11000 lbs.

FEATURES
Turnbuckles are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of galvanized steel, our turn buckles are built to last and weather resistant .

SPECIFICATIONS

Typical Use: For attaching and tensioning ROHN Tower Down Guy Terminations when utilizing 3/16" Strand (via 3/16" Pre-formed Dead-End with 5/16" Thimble or 3/16" Cable Clamps with 3/16THH Thimble), 1/4" Strand (via 1/4" Pre-formed Dead-End with 5/16" Thimble or 1/4" Cable Clamps with 1/4THH Thimble), and 5/16" Strand (via 5/16" Pre-formed Dead-End with 7/16THH Thimble or 5/16" Cable Clamps with 5/16THH Thimble) through One Eye, with the Jaw affixed to an anchor with an Integral Down Guy Equalizing Plate (like the GAC3455TOP and GAC5655TOP), or through a Closed Single Eye Anchor (like the GAS4303 and EZ 30)
Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.