Rohn 5/8TBE&E Turnbuckle 5/8 x 12 inch Round Eye to Eye

ROHN R-5/8 TBE&E-12 Turnbuckle for Tower Down Guy 5/8" x 12" Round Eye to Eye
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Round Eye, Open Body, Working Load Limit: 3500 lbs. Ultimate Strength: 17500 lbs.

FEATURES
Turnbuckles are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end. The body of the turnbuckle is reverse thread on opposite ends to allow tightening/loosening by simply turning the body of the turn buckle. Made of galvanized steel, our turn buckles are built to last and weather resistant .

SPECIFICATIONS

Typical Use: For attaching and tensioning ROHN Tower Down Guy Terminations when utilizing 3/16" Strand (via 3/16" Pre-formed Dead-End with 5/16" Thimble or 3/16" Cable Clamps with 3/16THH Thimble), 1/4" Strand (via 1/4" Pre-formed Dead-End with 5/16" Thimble or 1/4" Cable Clamps with 1/4THH Thimble), 5/16" Strand (via 5/16" Pre-formed Dead-End with 7/16THH Thimble or 5/16" Cable Clamps with 5/16THH Thimble), and 3/8" Strand (via 3/8' Pre-formed Dead-End with 1/2THH Thimble or 3/8" Cable Clamps with 3/8THH Thimble) through One Eye, with the Other Eye bolted through while "Sandwiched" between Dual Equalizer Plate Anchor Assemblies such as the GAC305, EP25345 or GAC303, EP25343.
Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.