ROHN CPC1.5/2 Clamp for Grounding 55G 65G Tower and Base Sections
Made in the USA!
The CPC1.5/2 Clamp is for Solid and Stranded Copper Wire and Stranded Wire Rope Grounding Connections to the 55G and 65G Main Tower Sections and Fixed Rigid Bases by means of affixing these 1.5 to 2.00 inch range Clamps around at any one of the (3) Tubular Rail (1.25" - 2.4" OD actual range) components at the lowest visible point possible above grade and in closest proximity to the Ground intended for use as to shorten the wire distance between as much as possible. The Lug also mates the connection to Solid/Stranded Copper or 7/16 6x25 EIP IWRC RRL Wire Rope as supplied in the BGK3GGX REV. G Grounding Kits (not included).
Harger CPC Pipe Ground Clamps compare to Burndy GAR
Made to connect to any of the three Leg Rail components of a 55G and 65G Main Tower or Fixed Rigid Base Sections in a Typical Tower Installation as these Tubes are within the nominal OD range above. This Clamp will also connect the Solid or Stranded Copper Ground Wire lead to the Ground Rod on the other end, completing your Grounding (Lightning Protection) System. Typically, 3 of these Clamps are used as most Systems will dictate that a separate Ground Connection be made to all three Tower Rail Tubes.
Print this page
Download