3 Star Inc C-MT 1" to 2 inch Pole to Pole or Pipe Antenna Mast 90° Crossover Clamp Bracket
Made in the USA!
This C-MT is a Medium Duty 1" to 2 inch Antenna Mast Pole to Pole, Pipe or 25G/45G/55G ROHN Tower Leg Rail Cross-Over Clamp Bracket Kit that mounts a 1" to 2 inch OD Pipe or Antenna Mast Tube perpendicularly at 90 degrees to another 1" to 2 inch OD Pipe, Tube or Round Tower member component via Galvanized U-Bolts, by clamping them together via a 1/8" inch thick, 4.75 x 7.25 inch Galvanized Steel Crossover Plate. This is typically used for the mounting of TV, Wireless Internet, Cellular Gateway, MIMO, UHF, VHF, Weather Station or Telemetry Antenna Mast Poles and Pipe usually attached to other masts and pipe, Tower legs, Railings, Balconies, Roof Tops, etc. Sometimes used to affix a Twin antenna U-Mast Assembly to a vertical mast, but mostly used to affix a vertical mast to and existing horizontal appurtenance. Each Kit includes one (1) plate and four (4) U-Bolt Assemblies.
Pipe and Mast Tubes are Not included but are available separately
Refer to "Specification" Tab above for More Detailed Information.
Features and Specification
- Vertical or Horizontal Mounting
- Pre-Galvanized Mounting Plate
- Plate Dimensions 5" x 7"
- U-Bolts Round Bend:
(2) 5/16" x 2.00" Wide x 4-3/16" Long
(2) 1/4" x 2.00" Wide x 3.00" Long
- Kept Nuts: (4) 1/4" and (4) 5/16"
Maximum Tubing Size: 2.00" Outside Diameter
Print this page
Download