From 2-7/8" to 4-1/2 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Only 3S-SCX3
|
Price:
$19.00
|
| Highlights: |
Hot Dip Galvanized Plate Only
To join from 2-7/8" to 4-1/2" OD Pipe
U-Bolts & Hardware Sold Separately
|
|
|
Availability: Usually ships in 1 week
Weight: 7 lb
|
Description  |
3 Star Inc SCX3 2-7/8" to 4-1/2 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Only
This 3S-SCX3 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Clamp Plate is used to mount from a 2-7/8" to 4-1/2" inch OD Pipe or Antenna Mast Tube at 90 degrees to another 2-7/8" to 4-1/2" inch OD Pipe, Tube or Round Tower member component via Hot Dip Galvanized (HDG) U-Bolts (Not Included), clamping to this 3/8" inch thick, 8.00 x 9.25 inch HDG 3S-SCX2 Crossover Plate. This Mounting Plate is only one of the components of the 3S-3030, 3S-3040, 3S-3540 and 3S-4040 Kits typically used in the mounting of Conduit on a Tower, Building or Roof, as well as Antenna(s) (TV, Wireless Internet, Cellular Gateway, MIMO, DBS, Satellite, Microwave, Panel, Dish and Array) usually attached to other Masts and Pipe, Tower legs, Railings, Balconies, Roof Tops, etc.
Includes (1) Plate Only. U-bolts, Pipe, Mast Tubes and associated Hardware are Not included but are Available Separately.
Refer to "Specification" Tab above for More Detailed Information.
|
Note: The Crossover Mounts are designed to support most WiFi , PCS, Cellular, and TV antennas. The Crossover Mounts allows you to vary the mounting pipe length and diameter, They are HDG Hot-Dipped galvanized for corrosion protection, and can easily be shipped UPS
|
Specification |
Images |
|
2-7/8" to 4-1/2 inch OD Pipe to Pipe Crossover Plate
The SCX3 Pipe to Pipe, Pole or Tower Cross-over Clamp Plate that mounts from 2-7/8 to 4-1/2 inch OD Pipe or Antenna Mast Pole at 90 degrees to another 2-7/8 to 4-1/2 inch OD Pipe, Tube or Round Tower member
|
| |
|
Print this page
Download