Universal Towers 6-70 Standard Duty 70' Foot Freestanding Aluminum Tower Kit

Price: $3,180.00

Options:
Base or Roof Mount	NONE ; B-26 Base Anchor $330.00; RFM-26 Flat Roof Mount $297.00
Mast Collar	1-1/4" Collar ; 1-5/8" Collar ; 2" Collar
Rotor Plate	NONE ; Yaesu Rotor Plate $88.00; Rotor Plate Blank $84.00
Bearing Plate	NONE ; UV 1.5" OD Hole Pattern $45.00; UV 2.0" OD Hole Pattern $48.00; DXE-TB300 Hole Pattern $45.00; DXE-TB400 Hole Pattern $48.00

Highlights:
Aluminum Standard Duty Tower Kit Freestanding Height - 60' Wind Loading: 080 MPH- 6.0 Sq. Ft. 100 MPH- 3.0 Sq. Ft. 110 MPH- 1.0 Sq. Ft.

Availability: Call to Order or Request Quote
Weight: 295 lb

Description

Universal Towers 6-70 Standard Duty 70' Foot Freestanding Aluminum Tower Kit
Made in the USA!
The Universal Towers 6-70 is a (7) Section, 70' Foot Tower with Optional Embedded Concrete Anchor Base or Flat Roof Mount. This Tower is designed for 6.0 to 1.0 Square Foot of Wind Load depending on Wind Speed Design of 80, 100 or 110 MPH rating and appurtenances added to Kit Package ordered. Select from a 1.25, 1.625 or 2.00 inch Mast Collar at Top Cap Section Pinnacle or Optional Thrust Bearing Mounting Plate.
Universal Towers are made with rugged, Heavy Wall Aluminum tubing legs and welded S-Bracing for strength as well as light weight.

WIND LOADING:

080 MPH- 6.0 Sq. Ft.
100 MPH- 3.0 Sq. Ft.
110 MPH- 1.0 Sq. Ft.

KIT INCLUDES:

B-26 Base Anchor (Optional)
RFM-26 Flat Roof Mount (Optional and May Necessitate Guying)
(1) 26-TAPR - Tapered Bottom Section
(1) 22-STRT - Straight Middle Section
(1) 22-TAPR - Tapered Middle Section
(1) 18-STRT - Straight Middle Section
(1) 18-TAPR - Tapered Middle Section
(1) 14-STRT - Straight Middle Section
(1) 14-TOP --- Top Pinnacle Section
Various Bolt Kits

OPTIONAL ACESSORIES:

Beacon Plate: sized to Straight Top Section
(Beacon Not Included)

Rotor Plate Drilled: for Most Yaesu Rotors, sized to Tower Top Section
Rotor Plate Blank: drill your own Accessory, sized to Tower Top Section
(Rotor Not Included)

UV Thrust Bearing Plate: drilled for UV Bearings, sized to Tower Top Section
DX Thrust Bearing Plate: drilled for DX Bearings, sized to Tower Top Section
(Thrust Bearing Not Included)

Rebar may not be needed; depending on Soil, Weather and Seismic Conditions. The Tower is Lightweight, and the Foundation is large enough to support most Tip-over Moments. Accordingly, #6 rebar can be used in concrete reinforcement applications. Consult your Local Structural Engineering Firm.
(Site Accessories Not Included)

Warranty Sheet

Note:

Base Option-Ground Mount or Roof Mount

The Ground Mount is the Most Common Application and pretty straightforward. The Ground Mount Hinged Base follows the Bottom Section Size and thus, so does the Concrete Pad requirement in correlation. All Wind Loads represented are predicated on this type of Installation in an open area away from other structures. For Risk Category Loading of Topography, Historic Wind and Communications Duty Type, Please contact us for a Quote.
The Roof Mount has additional requirements as Towers erected on this Base Fixture will Require Down Guys. Factory Engineering and Guidance to be invoked in ascertaining Height, Windspeed and Antenna Loading Limitations pertaining to Your Particular Installation, as will a Competent Structural Engineer to assess Roof Attachment and Load Bearing Methods. The Engineering will include the Guying Details based on the Information you have provided.

Top Cap Option-Collar, Thrust Bearing or Beacon Plate

Packaged Tower Kits typically include a Top Cap Section with 1 of 3 sizes of Mast Collar; 1-1/4" OD, 1-5/8" OD or 2.00" OD. You can Special Order Your Kit with a Thrust Bearing Top Plate welded onto a Mast Collar. The Thrust Bearing Top Plate is designed for the Universal Towers UV-TB158 and UV-TB2316 Thrust Bearings. (Sold Separately)
In Selecting the Universal Towers UV-BP Top Beacon Plate Option, the usual 11-TOP, 14-TOP or 18-TOP section will be substituted with a STRT Tower Section of the same size with hardware to Mount and Affix the UV-BP Beacon Plate. Field drilling may be required to mount any appurtenances onto the Beacon Plate itself, with hardware to be supplied by You or the Vendor of Your Particular Accessory or you can Cap your Tower with a STRT Section absent a Plate when Placing an Order by Phone.

Specification

Buyers Guide
Foundation Installation	Download
Specification Sheet	Download
Section Installation	Download

Images

Universal Towers 6-70 Standard Duty 70' Foot Freestanding Aluminum Tower Kit Universal Towers 6-70 Standard Duty 70' Foot Freestanding Aluminum Tower Kit

Accessories

Universal Towers 1-5/8" Inch Thrust Bearing Plate for Top Cap Tower Section - $45.00	Universal Towers 2" Inch Thrust Bearing Plate for Top Cap Tower Section - $48.00
Universal Tower UV-TB158 Thrust Bearing with 1-5/8" ID for 1.50" OD Masts - $117.00	Universal Tower UV-TB2316 Thrust Bearing with 2-3/16" ID for 2.00" OD Masts - $153.00
Universal Tower R-14 Rotor Plate Accessory Shelf Pre-Drilled for Yaesu Mount Bolt Pattern - $88.00	Universal Tower R-14NH Rotor Plate Accessory Shelf Blank Mount Not Pre-Drilled - $84.00
10' Foot x 1.25" inch OD Aluminum Tubing Antenna Mast Pole Pipe \| UV-125-10 - $60.00	10' Foot x 1.50" inch OD Aluminum Tubing Antenna Mast Pole Pipe \| UV-150-10 - $75.00
6' Foot x 2.00" inch OD Aluminum Tubing Antenna Mast Pole Pipe \| UV-2-6 - $65.00	8' Foot x 2.00" inch OD Aluminum Tubing Antenna Mast Pole Pipe \| UV-2-8 - $80.00
10' Foot x 2.00" inch OD Aluminum Tubing Antenna Mast Pole Pipe \| UV-2-10 - $95.00	16' Foot x 2.00" inch OD Aluminum Tubing Antenna Mast Pole Pipe \| UV-2-16 - $135.00