Single Side Arm Antenna Mount Assembly for 45G/45GSR/55G Series Tower | 4555MT

3 Star Inc 4555MT Single Side Arm Antenna Mount Assembly for 45G 45GSR 55G Series Tower
Made in the USA!
This Mount is a Heavy Duty Assembly comprised of (2) 2.00" inch HDG Angle Iron crossmembers, each 4' feet long (48" inches), that one one side, perpendicularly cross and clamp to the two Rails of Any 45G, 45GSR, 55G Tower Style Section Face, parallel to each other with about 3'-4' feet spacing between them. On the other side, at the Crossmember ends, braces a 4'-5' foot Mast Pipe (Typical, Pipe OPTIONAL) resulting in an approx. 23-1/2" inch Stand-Off (Rail Center to Mast Pipe Center) on one Side of the Tower Section Face.
The The Assembly can mount an Antenna Mast Pipe anywhere from 1-1/2 to 2-7/8 OD. on both sides
The Angle Iron, Mast Pipe (OPTIONAL) and Saddle Clamps that Attach them all are Hot Dip Galvanized, and the Bolt Hardware is HDG Grade 5. These Double Side Arm Mounts are intended for Light Weight Broadband, Wifi ,SCADA and Narrow Beamwidth Two-way Antennas.
Will Fit most ROHN, Nello and American Towers G-Style Communications Tower Series.
A Product of 3 Star Inc

Includes:
(2) -4 FT x 3/16" HDG Angle Iron Rail Mounts
(6) -HDG 3.50" inch Saddle Clamps
(12)-3/8" x 2-1/2" HDG Full Tread Bolt Assembly

Mounting Tube (Optional Size Packages Available):

A
(1) -4' foot x 2.0" SCH40 (2-3/8" OD) HDG Pipe or;
(1) -4' foot x 2.5" SCH40 (2-7/8" OD) HDG Pipe