ROHN 25G130R080 80' foot 25G Guyed Tower Complete 130/110 MPH Rated Kit
 Made in the USA!
The ROHN 25G130R080 80' foot 25G Guyed Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna Load and Wind Speed indicated. This 25G130R080 Kit is comprised of the following BOM (Less Foundation and Installation) in accordance for use as a 80 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 130 MPH (Rev. G) and 110 MPH (Rev. F).
Refer to View Larger Image or the ROHN Buyers Guide link under the Specification Tab for EPA Information.
This ROHN 25G Tower is to be used in a Guyed Configuration for Wireless Internet, Amateur and Business Radio, SCADA, DBS and Satellite Services, Cellular and Repeater, Smaller Microwave and Narrow Beamwidth Antenna Installations according to Specifications in the ROHN Catalog. As a Guyed Structure, a 130 MPH Rated Tower can rise to a maximum of 1o0 Feet. Refer to the ROHN Catalog for Foundation and Grounding Detail Information. Consult the ROHN Catalog PDFs in the Specifications Tab for more ROHN 25G Tower Details.
Item Ships LTL Freight ONLY!
THE 25G130R080 KIT INCLUDES THE FOLLOWING + OPTIONS
| BILL OF MATERIALS: 25G130R080 130/110 MPH RATED PRE-ENGINEERED KIT |
| QUANTITY |
PART NUMBER |
DESCRIPTION |
| 1 |
25AG2 |
Top Cap Tower Section |
| 7 |
25G |
10' Main Tower Section |
| 1 |
25AJBK |
Bolt Kit for 25G Top Section |
| 7 |
25JBK |
Bolt Kit for 25G Tower Section |
| 1 |
BPC25G |
Standard Concrete Base Plate |
| 3 |
GA25GD |
Guy Wire Bracket Assembly |
| 800 ft |
3/16EHS |
3/16” Extra High Strength Strand |
| 9 |
PLP-115 |
Yellow Plastic Guard for Down Guys |
| 18 |
BG2142 |
3/16" Big Grip Preform Dead-ends |
| 18 |
5/16THH |
5/16" Heavy Duty Thimble |
| 9 |
1/2TBE&J |
1/2" x 12" Turnbuckle Eye-to-Jaw |
| 3 |
TBSAFETY |
Turnbuckle Safety Wire and Clamps Kit includes:
(1) 14001 – 1/4” Galvanized Guy Clamp
(1) 1/44GW15 – 1/4” x 15’ Guy Wire |
| 3 |
GAC3455TOP |
Guy Anchor with 5 Hole Equalizer Plate |
| 1 |
AGK1GGX |
Anchor Rod Ground Kit includes:
(3) 15' of 7/16 EIP IWRC RRL
(3) 5/8" x 10' Galvanized Ground Rod (AKA 6260)
(3) 3/4” Clamp No. 8034 WB (AKA 340016)
(3) CPC.5/.75 Anchor Rod Clamp |
| 3 |
BGK3GGX |
Tower Base Section Grounding Kit includes:
(1) 15' of 7/16 EIP IWRC RRL
(1) 5/8" x 10' Copper Clad Ground Rod
(1) 3/4" Clamp Ground Rod Clamp
(1) CPC1/1.25 Tower Section Rail Clamp |
| 3 |
CPC.5/.75 |
Anchor Rod Clamp |
| 1 |
3/4x12PP |
Concrete Base Plate Pier Pin Insert |
| 1 |
ASSEMBLY GUIDE |
Printed Specification/Assembly Guide |
The 25AG2* Top Cap Tower Section is the Default Standard
Top Section for the 25G Series Tower Kits.
We Offer the following Substitutions when Ordering Our Kits:
TOP CAP TOWER SECTION OPTIONS
| OPTIONAL TOP CAPS FOR 25G130R080 KIT |
| PART NUMBER |
DESCRIPTION |
HEIGHT |
O.D. |
| 25AG |
Top Cap |
9' |
2" |
| 25AG1 |
Top Cap |
9' - 3" |
1.66" |
| 25AG2* |
Top Cap |
9' - 9" |
2.25" |
| 25AG3 |
Top Cap |
9' - 3 1/2" |
2.25" |
| 25AG4 |
Flat Plate Top Cap
for Thrust Bearing |
8' - 3/16" |
Pre-drilled
FLAT |
| 25AG5 |
Top Cap |
8' - 1/2" |
2.75" |
|
Note: Guyed Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the Downward force of all Downguy tensioned as specified, terminated to a properly embedded Anchor, the weight/size of the Foundation and the cohesive of the soil to prevent skid/pullout and all together to counter a Structural Failure or Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Ice Load, Transmission Cable Loads, Height, Standard Soil Conditions, Surrounding Environment and Duty (Exposure Categories).
The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project.
It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or Fill Out the Tower Quote Data Sheet Form found by clicking the Specification Tab above and send to 3 Star Inc./ROHN for a review.
*Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
|
Print this page
Download PDF