Print this pagePrint this page

Broadband Digital Subscriber Cable TV Modem HSI 1 GHz 15 dB Gain Drop Amplifier

Broadband Digital Subscriber Cable TV Modem HSI 1 GHz 15 dB Gain Drop Amplifier
Price: $24.95


15 dB forward and -1.2 dB reverse gain
6 kV protection (IEEE C-62-41-B3 on input, A3 on output)
Flat-end brass “F” ports with four-sided center conductor contact
Unique positive tilt compensates for greater attenuation at higher frequencies
LED Power Indicator
Baked Enamel Finish
Aluminum Die-Cast Housing
RFI Mesh Gasket
Neoprene Moisture Gasket

Availability: Ships in 1 to 3 Days
Shipping: Can ship anywhere
Weight: 2 lb

Signal Vision SV-A15PRS-I-M Broadband Digital Cable TV Modem HSI 1 GHz 15 dB Gain Amplifier
This CommScope / Signal Vision Product is a Quality Indoor/Outdoor 2-way Services 15 dB Gain Amplifier and is used by Comcast and other Cable TV companies in Installations of HD and HSI. Powered by a 12 VDC 200 mA supply, It is 2-way Services capable for PPV Programs and High Speed Internet connection to the Broadband Cable Modem. Install this Amplifier Inside or Out, comes with a Power inserter and Power Supply, each featuring "F" Port connections to facilitate multiple installation options using the same RG-6 cable used in the Cable TV Install (See "Install Guide" below). Install this Amplifier before the splitter that feeds to multiple TV set locations as to negate the loss of signal.

spec. sheet

Spec. Sheet
Install Guide

Install Guide

Get Adobe Reader





Too many times, you're stuck trying to fix the no man's land between your Home wiring, and the Cable TV Company Feed from the Pole or Pedestal. Old Installation cable and years of Up-Grades, Additional Outlets, Bandwidth Changes, Modems and High Definition leaves you with a distribution system beyond what was originally envisioned. The Cable TV Company will be happy to Charge you to go through and Re-Install your Home, or you can do it yourself! With HD Digital Signals, the Signal Level is actually lower than the analog, and with increased Channel Capacity, not enough is there to feed your Home. Check Your Picture quality where the Cable TV feed enters your Home, if it's good there, you can replace connectors, cable and splitters to bring your installation up to the newest specifications. If you are feeding numerous TV sets, Cable Modem and/or long Distances, use this Amplifier before the Splitter to maintain Signal Quality. What's nice about an Indoor/Outdoor In-Line amplifier is you can put it in anywhere, and move it to anywhere else later! Just use a Barrel Connector (F-81) or short jumper to reconnect the cables together in absence of the Amplifier you removed. If the Picture quality is Poor at the Feed point of your House (the Cable Company usually has a gray box used as a Demarcation Point for this Purpose), call your Cable TV Technician and Demonstrate to him your issues, so he can effect repair.