3S 5/8X12TBE&E Turnbuckle for Tower Down Guy 5/8" x 12" Eye to Eye
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Galvanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs. The Turnbuckle eye is elongated to reduce stress on eye and make it easier for Thimbles and other hardware to pass through.
- Weather Resistant
- Hot Dipped Galvanized Steel
Typical Use: For attaching and tensioning ROHN Tower Down Guy Terminations when utilizing 3/16" Strand (via 3/16" Pre-formed Dead-End with 5/16" Thimble or 3/16" Cable Clamps with 3/16THH Thimble), 1/4" Strand (via 1/4" Pre-formed Dead-End with 5/16" Thimble or 1/4" Cable Clamps with 1/4THH Thimble), 5/16" Strand (via 5/16" Pre-formed Dead-End with 7/16THH Thimble or 5/16" Cable Clamps with 5/16THH Thimble), and 3/8" Strand (via 3/8" Pre-formed Dead-End with 1/2THH Thimble or 3/8" Cable Clamps with 3/8THH Thimble) through One Eye, with the Other Eye bolted through while "Sandwiched" between Dual Equalizer Plate Anchor Assemblies such as the GAC305, EP25345 or GAC303, EP25343.
Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN R-5/8TBE&E 5/8 inch Eye to Eye Turnbuckle!
Print this page
Download