Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

RG6 Dual Coaxial Cable 60% Copper Clad 2 GHz with Ground 1000 Feet

Manufacturer Code5788
Stock Level: 0
ShippingCan ship anywhere


PVC Jacket
Flame Retardant
RG-6 Siamese
Both 60% Braid
2200 MHz

Bulk Quantities Available Here!


CommScope 5788 F2-660BVM045CMH HDC 1000' REEL RG6 Siamese Drop Cable
This is the Siamese Coaxial Cable your local Satellite TV company uses for Aerial Satellite Dish Feed Distribution. Our Customers use this in MHP Hotel Motel SMATV Cable TV, Video Surveillance and Hi Speed Internet Systems. Good for 2.2 GHz, it features CCS Center Conductor, Dialectric Foam, Bonded Laminated Aluminum Tape Inner Shield, 60% Braided Outer Shield, 17 AWG Copper Clad Steel Ground / Messenger, all encased in a PVC Jacket...
Standard Shield - CommScope's basic cable construction of fully bonded foil with a layer of shielding braid offers world class performance within an economical design. The industry standard workhorse, it provides ample conductance for most drop applications up to 150 feet in length.


This is the same Commercial Grade Dual Feed with Integral Ground Messenger Low Loss Cable your local Satellite TV company uses to get from the Dual LNB Satellite Dish to and through your House. Our Customers use this in their MHP Hotel Motel SMATV Cable TV, Video Surveillance and Hi Speed Internet Systems to distribute around Building Properties

Rate this product.
Product isn't rated yet. Write a review.

RG6 (RG-6) with 60% Braided Shield coverage is the most commonly used form of this Utility Cable. The Variants within this sub-category usually are denoted by differences in Center Conductor and Shield Material Composition. Starting first with the Shield, Aluminum Braid will be used in concert with a Aluminum Foil Layer bonded to the Dialectric surrounding the Center Conductor. This the most common variant within the variety and is appropriate for most uses. The limiting factor in its use will be the density and strength of interfering carriers found ambient in the environment of use. 60% Braid coverage is not recomended for lengthy networks or distribution systems in Hotels, Motels and Apartment Complexes as these environments are open to reception of frequencies being re-used over the air, coupled with the antenna radiation-like properties of large distribution networks with poor Grounding. Copper Shielding with the same 60% Braid Coverage does perform better in these environments due in part to its lower DC Loop Resistance. Whereas Aluminum Braided Shield usually goes hand in hand with Copper Clad Steel Center Conductors, likewize goes Copper Braided Shield with Solic Copper Center Conductors. Copper Clad Steel will suffice in almost any utilization scenario, however most Satellite TV Operating companies will require Solid Copper Center Conductor to be used by their respective Sub-Contractor Installers for Maintainence and Warranty issues. This is due to the DC Voltage component being fed from the Receiver back to, and Powering the LNB(f)s mounted on the Satellite Dish. Unless the run is extremely long and the connectors applied are of dubious Quality, the DC Loop Resistance difference between Solid Bare Copper and Copper Clad Steel is negligible in short distances.