ROHN BRM64510M Non-Penetrating Roof Antenna Mount 4.50 in. x 10 ft. Mast
ROHN
Made in the USA!
Mast Dimensions - 4” STD. Pipe (4-1/2O.D.) x 117-3/4”
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast pipe are Hot dip galvanized for corrosion protection and go together quickly.
This Item Ships LTL Freight ONLY.
Height and Antenna Loading capability are dependent upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation. Please refer to the Chart (pdf link above) which is a great place to start in determining whether your circumstances qualify for such an installation. If you cannot find someone local to evaluate the registered plans for your Flat Roof Structure, ROHN may be able to put you in contact with someone who can.
Download PDF
ROHN Direct Embed Monopole Towers
GENERAL USE:
ROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today’s dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles offer extremely efficient designs.
FEATURES:
• Completely hot-dip galvanized after fabrication
• Fast, easy installation
• Designed for applications with stringent deflection requirements
• Internal routing of transmission lines
• Each pole ships with the following:
Assembly Drawings and Standard Foundation Details
(4) 5” x 7” Ports with (2) port covers
(3) Jacking Lugs on each side of splices
(3) Ground attachment clips
(1) Vented cap plate
(1) Bearing plate welded to bottom
Safety Climb Support Brackets
(1) Safety warning sign
(1) Pole ID tag
Attachment clips for optional step bolts
• Optional items are available and may be ordered separately.
• Custom designs available for any height or application.
Per Rev G requirements, any structure greater than 10’ requires a climber safety device.
Sorry, we are offline,
click here to send us message
