ROHN FRM125 Non-Penetrating Roof Antenna Mount 1.25" OD x 60 inch Mast
ROHN
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast for placement of various TV, Radio, Microwave, WiFi and Wireless Internet Antennas. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection and goes together quickly.
Mast Dimensions - 1.25" 16 GA Pipe (1-1/4 O.D.) x 60”
Antenna and wind loads vs ballast weight, Spec.s and Buyers Guides are found in the Specification Tab above.
Height and Antenna Loading capability are dependent upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation. Please refer to the Chart (pdf link above) which is a great place to start in determining whether your circumstances qualify for such an installation. If you cannot find someone local to evaluate the registered plans for your Flat Roof Structure, ROHN may be able to put you in contact with someone who can.
Download PDF
Download PDF
Selecting Antenna Mast Pipe?
Selecting the proper antenna mast pipe is crucial. Depending on the size of your antenna, it's EPA, weight and height all play a factor in selecting a supportive pole. When planning, it's best to have all the information you can get like outside diameter of your attaching method, the clearance of gutters, siding or other obstacles in the path of your erecting a mast or tower.
Here you will find standard straight pipe in 5' foot and 10' foot lengths. You can also find those same pipes with a special end called a swag. A swaged ended pipe allows you to attach several lengths of pipe together.
| Swaged End | Straight End |
 |
 |
When selecting a pipe you will need to know the length, OD (outside diameter), whether the AWG is 16 or 18 (the smaller the number the thicker the steel) and whether you'll need any swaged ended pieces. You'll then need to select the proper mounting such as wall, roof or maybe a tripod mount
Sorry, we are offline,
click here to send us message
