ROHN RSL100L10 RSL 100 Foot Tube Brace Tower Kit
RSL 100' Light Weight Self-Support Tubular Brace Tower Kit , U-Shaped High Strength Angle Legs , Hot-Dipped Galvanized , is designed for use in Wireless Broadband , public Safety & Security applications .The RSL is shipped knocked down to reduce shipping cost and time .
CLASS I Structure / Exposure Cat B / Topo Cat 1 (See More Info)
This Kit Includes:
Top Kit- RSLH1A
Bolt Kits- 10
RSB10 Short Base ( Optional )
RAL10 Anchor Base Kit ( Optional
Site-specific designs are available upon request
*Per Rev G requirements, any structure greater than 10', requires a climber safety device.
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesiveness of the soil to prevent the chance of tower tip over, as well as the strength of the tower members to withstand these Forces against them.
ROHN Tower Kits are designed based on assumptions made regarding Wind Speed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, fill out this form and send it to firstname.lastname@example.org
The tabulated allowable effective projected areas (EPA) are limited to a maximum recommended value of 80 (ft2). EPA values shown as " - " indicate tower kit is not applicable for the corresponding wind speed. Site-specific designs are available upon request.