Towers | Poles | Mounts | Masts | Hardware | Guy | Cable | Wire | Carts | Racks | Tools
Your Cart
Your shopping cart is empty!
Printer View Tell a Friend

ROHN RSL 70 Foot Angle Brace Tower Kit – RSL70A28

Price$4,110.00
Manufacturer CodeRSL70A28
Base Type:
Qty
AvailabilityCall for Pricing
ShippingCan ship anywhere

Highlights

-Available in heights from 20' up to 100'

-U-shaped legs allows for simple lap splice connection

-Available in standard and heavy models

-Pre-punched holes for attachment of safety climb systems, mounting kits, etc.

-Braces for each section are the same length, while bolt lengths are standard throughout the tower

-Tower material is hot-dip galvanized

-Assembly drawings provided with tower

-Top closing Tube standard with each tower package

Bulk Quantities Available Here!

ROHN RSL70A28 Complete 70 Foot Angle Bracing Tower Kit

U-Shaped Legs allows for simple lap splice connection. Pre-punched holes for attachment of safety climb systems, mounting kits, etc., braces for each section are the same length, while bolt lengths are standard throughout the tower. Tower material is Hot-Dipped Galvanized, Assembly drawings provided with tower, top closing angle standard with each tower package.

 

Structure Classification – 11
Exposure Category – C
Topo-Graphic Category - 1
3-Second Gust Wind Speed -w- Ice - 40 MPH
Design Ice Thickness - 1"
Earthquake Spectral Response Acceleration - 2.50
Heavy Tube Bracing Dish Loading

 

This Kit Includes

RSL70A28

70 Foot Angle Bracing Tower

Sections

R2A – (Angle) Section 2

R3A – (Angle) Section 3

R4A – (Angle) Section 4

R5A – (Angle) Section 5

R6A – (Angle) Section 6

R7A – (Angle) Section 7

R8A – (Angle) Section 8

Bolt Kits

7

Top Kit

RSLH2A

ACWS Anti-Climb Warning Sign

Assembly Guide

OPTIONS

Short Base

RSB08

Anchor Bolts

RAL08

Grounding Kits

Grounding Kit (3 Leg)

Grounding Kit (1 Leg)

RGKG

RGKG-1

 

 

Site-specific designs are available upon request


 


Optional Accessories are available and may be ordered separately:

 

Note

Self-Supporting Towers are limited in height due to the nature of Antenna and Ice Loads versus the Cantilever Nature of Wind against them, offset by the weight of the Foundation and the cohesiveness of the soil to prevent the chance of tower tip over, as well as the strength of the tower members to withstand these Forces against them.

*PER REV G REQUIREMENTS CAUTION

Any Structure Greater than 10’, requires a climber safety device.

 

 

ROHN TOWER GUIDELINES(WARNING!)

ROHN Towers are designed based on assumptions made regarding Wind Speed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment AND Duty.

 

The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these kits does NOT account for the Variations of Historic Windspeed, Number of Antenna Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes; That will be Applicable to Your Project.

 

It is RECOMMENDED that you take the time to acquire a Local Engineer (Structural Engineer) that has the expertise and available Information necessary to evaluate the Stock Design for Applicable us.

 

NEED HELP?

Fill out this form and send it to support@3starinc.com

 

Specification Sheet






Rate this product.
Product isn't rated yet. Write a review.

GENERAL USE

The ROHN RSL is a light weight self-supporting tower designed for use in broadband, public safety and security applications. The RSL reaches above line-of-site obstacles such as tree tops, hilly terrain and buildings. The RSL is shipped knocked down to reduce shipping cost and time.



STRUCTURE CLASSIFICATION = I

That due to height, use or location poses a low hazard to human life and damage to property in the event of failure and/or used for services that are optional and/or where a delay in returning the services would be acceptable.


EXPOSURE CATEGORY = C

Open terrain with scattered obstructions having heights generally less than 30 ft (9.1 m) This category includes flat, open country, grasslands and shorelines in hurricane prone regions.


TOPOGRAPHICAL CATEGORY = 1

No abrupt changes in general topography, e.g. flat or rolling terrain, no wind speed-up consideration shall be required. 

 

3-SECOND GUST WIND SPEED WITH ICE = 40 MPH

 

DESIGN ICE THICKNESS = 1.0"

 

EARTHQUAKE SPECTRAL RESPONSE ACCELERATION, Ss = 2.50

 

ROHN RSL Angle Braced Class II
ROHN RSL Angle Braced Class II

The tabulated allowable effective projected areas (EPA) are limited to a maximum recommended value of 80 (ft2). EPA values shown as " - " indicate tower kit is not applicable for the corresponding wind speed. Site-specific designs are available upon request.

ANGLE BRACING
CLASS II LOADING

Products   Recently Viewed