ROHN R-340021 5/8" x 10' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amal...
http://www.3starinc.com/58_x_10_foot_ground_rod_copper_clad
3 Star Inc GR-2 4-Way Brace Ring Collar for Non-Penetrating Roof Mount Antenna Mast
Made in the USA!
For Non-Penetrating Flat Roof Mount Assemblies with Adjustable mount, 4-way Leg attachment and Set Screws for supporting Antenna Masts from 1-1/4 up to 2-3/8" in Diameter. Can Be used for Repa...
http://www.3starinc.com/antenna-mast-ring-collar-with-4-way-leg-support-for-non-penetrating-roof-mount
3 Star Inc GR-2-A Adjustable 4-Way Down Guy Ring for 1-1/4" to 2-1/4" OD Antenna Mast
Made in the USA!
Adjustable Height and Diameter Antenna Mast Down Guy Ring used in 4-Way guying of Antenna Masts with Forged Eye Bolts to affix 618/620 guy wire, Fits Masts from 1-1/4 up to 2 1/4&q...
http://www.3starinc.com/universal-down-guy-ring-adjustable-for-up-to-2-1-4-od-antenna-mast
GR-4 - 5/8" x 4' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our s...
http://www.3starinc.com/5-8-x-4-foot-ground-rod-copper-clad
ROHN R-340020 5/8" x 8' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalg...
http://www.3starinc.com/58_x_8_foot_ground_rod_copper_clad
ROHN GR1 Guy Ring for 1-1/4" Telescopic and Antenna Mast Placement
Made in the USA!
This is a ROHN OEM Factory GR1 Telescopic Mast Rolled Edge Guy Ring with a 1-1/4" ID. There are two of these used on every ROHN H-Series Telescopic Antenna Mast. The innermost tube section is always a 1-1...
http://www.3starinc.com/rohn-gr1-telescopic-mast-guy-ring-1-1-4-rolled-edge
GR8GROD 5/8" x 10' Galvanized Ground Rod
A Galvanized ground rod that is 5/8 in. nominal in diameter with a length of 10 ft . Zinc-Coated exteriors are hot-dip galvanized for solid protection against corrosion , The ground rod meets NEC , UL and in accordance with ASTM® , u...
http://www.3starinc.com/5-8-x-10-foot-ground-rod-galvanized
3 Star 4GR 3/8" x 45" Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, 3/8" ground rod for use when grounding off-air antennas and satellite dishes. Includes preinstalled ground clamp...
http://www.3starinc.com/38_x_4_foot_ground_rod_copper_clad
GR8GROD 5/8" x 8' Galvanized Ground Rod
Galvanized over Electrolytic Copper On Steel Core. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV....
http://www.3starinc.com/58_x_8_foot_ground_rod_galvanized
Holland Electronics GRB-1 Single F-81 Ground Block
is a zinc anti-corrosive standard Ground block that accomodates a 12 AWG Ground Wire with ease...
http://www.3starinc.com/single_port_coaxial_cable_ground_block_grb-1
