3 Star Inc 3S-MAT 1/8 inch Rubber Protective Mat for Non-Penetrating Roof Antenna Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat measures roughly 54 wide by 54 inches long, trims neatly, place underneath Frame of No...
http://www.3starinc.com/protective_roof_mat_for_non-penetrating_antenna_mounts
3S--MCP Galvanized C-Clamp 1/2" x 2-00" x 11-5/8"
Galvanized C-Clamp half is used in many kits , Hot Dipped Galvanized ....
http://www.3starinc.com/3s-mcp-galvanized-c-clamp-half
3S-MD-CL Heavy Duty Medium Mast Clamp and Round U Bolt
The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protecti...
http://www.3starinc.com/heavy-duty-medium-mast-clamp-and-round-u-bolt
3 Star Inc NP-GWKIT 6/20 Down Guy Wire Kit For Non-Penetrating Mount Antenna Mast up to 2-1/4" OD
Made in the USA!
Complete kit for guying down a mast on a Non-Penetrating Mount up to 2.25" diameter. Includes guy wire, guy ring, S hooks, turnbuckles and cable clamps. Rebar Stakes with eye loo...
http://www.3starinc.com/non-pen-and-tripod-mount-guy-wire-kit-for-2-25-mast
3 Star Inc 3S-PAD 3/8 inch Rubber Protective Pad for Non-Penetrating Roof Antenna Mount
A Protective 24" x 72" Layer that you can Custom Cut to place between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 Thick Pad is for placement underneath the Frame o...
http://www.3starinc.com/protective-barrier-pad-for-non-pen-roof-mount
EZ-PNP Non-penetrating Satellite Dish Pitched Roof Mount
Made in the USA!
is constructed of Pre-Galvanized Steel and uses standard concrete blocks with a 9 inch by 6 inch Foot Plate. This Particular Model can Accommodate a wider Range of Foot-Plates...
http://www.3starinc.com/non-penetrating_dbs_dss_pitched_roof_mount
3 Star Inc EZ-PNP-M Non-Penetrating Pitched Roof Peak Antenna Mount with Mast for DBS/DSS Dish
Made in the USA!
This 3S-PNP-M Non-Penetrating Pitched Roof Peak Antenna Mount with Mast for DBS/DSS Dish is constructed of Pre-Galvanized Steel and uses standard concrete blocks with a 9 inch by 6 inch ...
http://www.3starinc.com/non-penetrating-dbs-dss-pitched-roof-mount-with-mast
3S--SCP Galvanized C-Clamp 1/2" x 1-1/2" x 5-7/8"
Galvanized C-Clamp half is used in many kits , Hot Dipped Galvanized ....
http://www.3starinc.com/3s-scp-galvanized-c-clamp-half
3 Star Inc SCX2 2-3/8" to 2-7/8 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Only
This 3S-SCX2 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Clamp Plate is used to mount from a 2-3/8" to 2-7/8" inch OD Pipe or Antenna Mast Pole at 90 degrees to anothe...
http://www.3starinc.com/3s-scx2-crossover-plate-only-2-3-8-in-to-2-7-8-in-od-round-members
3 Star Inc SCX3 2-7/8" to 4-1/2 inch OD Pipe to Pipe, Pole or Tower 90° Crossover Plate Only
This 3S-SCX3 Heavy Duty Pipe to Pipe, Pole or Tower Perpendicular Cross-over Clamp Plate is used to mount from a 2-7/8" to 4-1/2" inch OD Pipe or Antenna Mast Pole at 90 degrees to anothe...
http://www.3starinc.com/3s-scx3-crossover-plate-only-for-2-7-8-in-to-4-1-2-in-od-round-members
