ROHN BGK5GGX Pole Grounding Kit
Grounding kit for ROHN Direct Embed Poles
http://www.3starinc.com/rohn_bgk5ggx_pole_grouding_kit
Holland BP-4IV Single Off-Set F Port Wall Plate Ivory
ABS plastic standard wall plate, 2.75 by 4.5 inches, Single Port for F-81 installation with 3/8 inch, Hex Inset hole. Also for Taps and Directional Couplers In-Wall for Loop Feed Hotel and Motel SMATV Systems...
http://www.3starinc.com/single_port_off-set_wall_plate_ivory
ROHN BP6 Bearing Plate for 45GSRTBPP Tapered Base Section Installation
Made in the USA!
Bearing Plate for use with a Tapered Base (45GSRTBPP), fixated to Concrete Pier with Pier Pin 3/4x12PP (available separately).
http://www.3starinc.com/rohn_bp6_bearing_plate_for_45gsr_tapered_base
ROHN BPC25G Concrete Base Plate for 25G Guyed Tower
Made in the USA!
The ROHN BPC25G uses a 3/4" x 12" pier pin to align the plate to the concrete slab and prevents Lateral Movement for ROHN 25G Guyed Tower installations only. This ROHN Base Plate is 15 inches Square and 3/16 Thick, allo...
http://www.3starinc.com/rohn_25g_tower_concrete_base_plate_r-bpc25g
ROHN BPC45G Concrete Base Plate for 45G Guyed Tower
Made in the USA!
The ROHN BPC45G uses a 3/4" x 12" pier pin to align the plate to the concrete slab and prevents Lateral Movement for ROHN 45G Guyed Tower installations only. This ROHN Base Plate is 24" x 20" Square and 5/16 T...
http://www.3starinc.com/rohn_45g_tower_concrete_base_plate_r-bpc45g
ROHN BPC55G Concrete Base Plate for 55G Guyed Tower
Made in the USA!
The ROHN BPC55G uses a 3/4" x 12" pier pin to align the plate to the concrete slab and prevents Lateral Movement for ROHN 55G Guyed Tower installations only. This ROHN Base Plate allows the ROHN 55G Tower to be Mounted ...
http://www.3starinc.com/rohn_55g_tower_concrete_base_plate_r-bpc55g
ROHN BPH25G Hinged Base Plate for 25G Guyed or Bracketed Tower
Made in the USA!
The ROHN BPH25G Hinged Base Plate for 25G Guyed or Bracketed Towers is Bolted to a Concrete Pier Placement. The BPH25G is pre-drilled for use with six (6) 1/2 x 12 inch J-Bolts or Equivalent Embedded in Concrete Pier P...
http://www.3starinc.com/rohn_25g_tower_hinged_base_plate_r-bph25g
ROHN BPH45G Hinged Base Plate for 45G Guyed or Bracketed Tower
Made in the USA!
The ROHN BPH45G Hinged Base Plate for 45G Guyed or Bracketed Towers is Bolted to a Concrete Pier Placement. The BPH45G is pre-drilled for use with six (6) 5/8 x 12 inch J-Bolts or Equivalent Embedded in Concrete Pier P...
http://www.3starinc.com/rohn_45g_tower_hinged_base_plate_r-bph45g
ROHN BPL25G Thrust Bearing Plate and Down Guy Top Cap for 25G Tower
Made in the USA!
The ROHN BPL25G Thrust Bearing Top Cap Plate bolts onto the top of any Standard ROHN 25G Main Tower section of 10, 7, 5 or 3 foot in height and with long legs, can provide extra clearance for installation of equip...
http://www.3starinc.com/rohn_25g_top_cap_thrust_bearing_plate_r-bpl25g
ROHN BPL45G Thrust Bearing Plate and Down Guy Top Cap for 45G Tower
Made in the USA!
The ROHN BPL45G Thrust Bearing Top Cap Plate bolts onto the top of any Standard ROHN 45G Main Tower section and can provide extra clearance for installation of equipment such as Rotors on an Accessory Shelf mounte...
http://www.3starinc.com/rohn_45g_top_cap_thrust_bearing_plate_r-bpl45g
